push in rivet, pin, clip automotive 6, 7, 8, 10 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
push in rivet, pin, clip automotive for holes: 6mm , 7mm, 8mm, 10mm
- Ocena
- 5 / 5
- Polubienia
- 330
- Pobrania
- 1284
- Wydruki
- 5
- Wyświetlenia
- 3579
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Step-by-step:
Place the insert so that it protrudes from the head side of the pin.
Put the pin into the hole.
Push the insert until it is flush with the pin’s head.
To remove the pin, push the insert inward — the pin will unlock and can be withdrawn.
Printing notes:
Print at least two parts at a time to improve cooling.
For the inserts, I suggest using a brim.
Use filament with good layer adhesion.
For indor and oudor stuff PLA is good enough.
For higher temperature resistance, I recomend to print with PET, PC, PA or BAMBU TPU for ams.