Counting matching models…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Opening model of planetary gearbox for Prusament PA11 Carbon Fiber. The model was specially designed for this type of material as a presentation of the applicability of polyamide material in practice. This is a working model of the…
Just a CPU protection tray for Intel LGA1151 CPU's Good for storage or shipping! PLEASE NOTE RECOMMENDED LAYER HEIGHT Updated: 6/29/2024 Added version for 7th and 8th Gen Print Settings Layer height: 0.15mm - 0.20mm Support: None
I print this with PET-G at a 0.3mm layer height, works great.
These parts are a custom-designed wall mount for the Samsung Galaxy Tab A11. I created this model because I couldn’t find a properly fitting holder for this specific tablet model. The mount is designed for use as a smart home control…
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
I needed to ship a CPU to my friend and he didn't want me to send just wrapped in bubble wrap. It fits nicely and is reusable. The hinge uses a piece of 1.75 mm filament. Print Settings Printer: Voron 2.4 Rafts: Doesn't Matter Supports:…
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Remixed from a Thingiverse file. The original file didn't have enough clearance for the Heat-pipes, which I have fixed.
The mount follows exactly the lines of HJC RPHA11 Helmets, and has dedicated clearance to still open and close the air chin intake ! Although it may seem as the angle of the camera would be way too much towards the sky, it as absolutely…
Template for mounting plate for ZyXEL routers: [NWA50AX] https://www.zyxel.com/global/en/products/wireless/80211ax-wifi-6-dual-radio-poe-access-point-nwa50ax [NWA90AX]…
23.08.2023 Added restyling of the previous design (marked "NEW"). 03.08.2023 Added files (.f3d) for creating threads of different hose sizes and a blank of the main part, in which you can place your own thread. Plate size 80 x 100 x 5…
Needed a way to attach my Sequre SQ-A110 to the Adafruit heat insert press, so I made these brackets for it. One is intended if you want to keep it on, and just screws in place. (use threaded inserts on the back piece of both versions)…
This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan. These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit. Good to have one on hand…
This is a mount I modeled for the Viofo A119 V3. Fits very well and is easy to print in multiple orientations. Print Settings Printer: Artillery 3d Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: ANY PETG Notes: PETG…
This is a plate for table mounting a Bosch 1617/1618 with the table mount base (RA1165). It is designed to flush mount in ¾" plywood (actual height .72" / 23/32"). I had a ¾ MDF below that to support the plate, but this could be anything…
Blueprint généré à partir d'une image.
I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…
This variation provides a pretty good fit to the “window” on the RA1161 base. I moved the plastic piece that Bosch provides to cover that window to the other side of the base. Slipping the cover behind the height adjustment shaft is a bit…
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
CPU Case for LGA 1151 (Specifically the 8700K), I use just a bit of Filament for the hinge.
Portable AC exhaust to 6 inch dryer duct connector adaptor FRA113PT1 Connect Frigidaire FRA113PT1 portable air conditioner with 6inch flexible dryer duct. I bought this portable AC used, it didn't come with the duct or duct connector so I…
Small spare wheel for vacuum cleaner foot Tineco A11 Hero to replace the old damaged ones. Printed with Extrudr PETG hellfire red with 0,4mm nozzle and 0,12mm layer height. TPU would certainly be better. Maybe it also fits on other…
The Bosch RA1181 router table does not come with a miter gauge so this solves that problem. This design includes 2 sliders: one with a detent for 15 degree increments, and one with out a detent to allow for any angle to be set. The main…
Tweeter pods made to fit along the sides of the dashboard. Some sanding will be required on the left pod to get a perfect fit. Additionally the tweeter holes could be adjusted to fit different tweeter sizes.
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
Réparation des charnières des platines JVC L-A55, L-A31 ou L-A11 des années 1979 et 1980
Wall mount for Zyxel NWA5120 and NWA1123 Series WLAN Access Points
like it if u like it :D
Modified keycap by removing original stem attachment and adding Redragon A113 switch-compatible stem attachment.
UPDATE: I've used 4inch duct for few days, but I felt like its restricting flow so I switched to 6 inch duct. You can use this design if you absolutely need to use 4 inch duct but I recommend 6 inch duct. I designed an adapter for 6 inch…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
Adhesive assembly required. .step included. Remix If you want to use it as a template for your own mount, try looking at https://www.printables.com/model/341266-step-zyxel-nwa50ax-nwa90ax-nwa110ax-mount-plate-te Slicing guide: Enable…
Cette silhouette de voiture donnera à votre chambre, votre bureau ou votre garage un aspect unique et attirera l'attention de tous les passionnés de voitures.
I mounted the Bosch RA1181 router table on my table saw and mounted a Triton router to it. I wanted a simple place to put the accessories (extra router plate inserts, spanner, lift arm, extra collet) and cord management so that they're…
The Box and Inserts are designed to hold an Aifen A11 USB Solderpen, Aneng A3008 Multimeter and various other Tools as shown in the Pictures. The Box is based of the Rugged Box with a size of 100x200mm. For the latches and hinges you need…
This is a specialized AF timer build I made for @nascarsimraci_903773 's excellent ⅓ scale 3T22A model . It's not built for an original Federal Signal A11 board or switches, but is built to resemble it. Instead, I utilized a…
Držák mobilní pergoly pro venkovní použití, pergola zn. Rhino Rack
Please find enclosed my first 3D design for a lens cap for the tiny Pentax 24 mm lens dedicated to the A 110. I create a little emboss inside the internal ring in the aim to clip it by using the thread of the filter fixation of the lens.…
Simple TPU case for Samsung Galaxy A11. Supports needed. If using Bambu Studio just use "normal (auto)" default supports.
MOD. AUTOBIANCHI A112 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Adjusted in tinker cad using online size guides and a ratio calculator
ZA11-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA11-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side pcb.
Viofo CPL A119 A129 Polarisation filter holder If You broke your CPL filter holder you can print one.
Remplacement des charnières des platines JVC L-A55, L-A31 ou L-A11 des années 1979 et 1980
Original rubber plugs A1109870544 are usually ruptured because their surface is deep under door surface. In some cases (on my C124 front adjusting screw) the screw is protruding out so it is impossible to mount original cap without…
If you lost your original factory-provided storage mount this is a good solution for Kidde FA110 fire extinguishers commonly sold for home use. It will fit any fire extinguisher that is 83mm in diameter snugly and securely, although it is…
Couldn't find keycaps to fit Redragon A113 style switches so I made this model to be able to attach to the many keycaps already out there. Enjoy and please add any keycap models you attach this to so I can download! Specifically designed…
Jaguar ESCUTCHEON SCREW COVER GJA1108ACLEG inner door latch screw cover for Jaguar XKR/XK8(X100) 96-05, this is a replacement for the original, it will come off after installation if you so wish(the original most of the time will not…
This model is a tweak to my version that fits LGA2011 1U heatsinks, I haven't printed and tested it yet, but it seems like it should work. This time I have included a version that uses M4 hex nuts, plus one like the 2011 socket model that…
Tischständer der Doorbird A1101 Innenstation. Im Boden können Magnete 15x3mm eingesetzt werden.
You may need to resize the hole for the boost gauge depending on your needs.
Model of front and back Alpine A110 rims for RC (1/32)
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
Made this for my buddy and figure I would post it so that you can use it as well! The clamp fits nicely on his Elantra's rear view mirror stem, but if you need to you can always modify the STEP files to fit your car's if it is different!…
Replacement pole hinge pin for a Rhino Rack Batwing/Foxwing awning. The OEM version of this is made of PA6 but I have printed these in ASA and PETG successfully. Use 5 Wall loops and 25% infill. To get a strong part there is a…
Print in PETG (PLA will deform in the sun) and use 4 brass insert (M3*6*5) + 4 M3 screws (intended for 10mm long screws but you can use as short as 7mm, wouldn't go below as the wind deflector is 2mm thick and the insert have 6mm thread)
Custom stackable server enclosure built to stack two Fujitsu Esprimo Q920 mini PCs and cool them efficiently and quietly with a single 120mm fan. The top and bottom pieces are screwed together by 3x #6-32 screws. Reuse the fan screws from…
More information: https://nerd-corner.com/solid-works-stepper-stand-nema-17/
Print using 95A TPU with 100% infill. Print standing on end. I did not use supports when printing, but you may need some support for the flange overhang. The bushings have a 0.1mm gap to serves to split the bushing; post print you will…
On my Bosch RA1181 router table, the inset rings (red hole caps) are not flush with the table top. They are low by about 0.4mm. So a created a ring shim that installs nicely on the back of the insert rings. I made it 0.4mm thick but you…
Pretty simple design. I wanted something that was stackable and optimized for shipping. I made a single CPU version and a 9 CPU version. All versions are stackable. The one with “Tight stack fit” in the name was a first revision of the 9…
The Guide Block that comes with RA1171 is not suitable for the Featherboard I built myself.
Key chain in the shape of head gasket from the 2.0TFSI engine code BGB (EA113) I have personally printed it in a TPU since any stiff material is iritating to carry
NEMA11 Stepper Motor Mount. Used to mount a stepper motor to an aluminium extrusion for an OpenPnP rotation axis.
Print with supports and for the bottom and then print the strip in white to give it the Airbus look.
Alpine A110 (2017) is a scale model STL of a real civilian sports car for display, diorama builds, and 3d printing enthusiasts searching for Alpine A110 3d model or Renault Alpine A110 stl. Use it for car collections, desk or shelf…
It allows mounting the old but very good QC-80 Cu cooler on the LGA115x socket.
Had an LGA1151 Motherboard with a noisy CPU cooler on it. I wanted to re-use the Zalmen cooler I had from an older AMD Motherboard. Printed in PETG with >20% infill
Alpine A110 scale model stl car for 3d printing, an authentic civilian sports car model made for display and diorama builds. Great for model car collections, tabletop scenes, shelf displays, and automotive-themed gift ideas for gearheads…
Well, I am not really sure if this worth sharing. But I'll do it anyway 🙃 This is a cap for a Pentax A110 24mm lens with the UV filter attached. It's just a snug fix - without any fancy mechanics. It took me two prints to get the…
Web/Built Accessibility Coin - A11Y - Support Web & Built Environment Accessibility (NFC Option) The Web/Built Accessibility Coin - A11Y is a 3D-printed token designed to promote accessibility in both digital and physical environments.…
This is a replacement top bushing on a Suzuki Cappuccino EA11R differential. Print using 95A TPU with flange side down for each half and adjust infill for desired firmness (I used 50% infill and 5 wall layers for my application). For this…
This is a simple camera cover to block the cameras on this tablet when not in use. I've printed this in PLA and TPU but found the PLA version much better as the stiffness allows the cover to grip the rear camera, allowing the cover to…
Description: This is a custom-designed sun hood for the LCD screen of the Canon XA11 camera. It clips onto the display and helps block direct sunlight, making it much easier to see your screen when shooting outdoors 🎥 The fit is made…
Gridfinity Bin for 1x Anker PowerCore+ Mini (A1104) with 6x3mm magnet holes Powerbank diameter: 23mm
If you are converting your HP 600 800 ProDesk EliteDesk G2 PC to ATX Case you will need a backplate to secure the original CPU cooler to the Motherboard unless you use an aftermarket cooler. You could use this bracket. Print in PETG for…
Modified the Front Rod holders to add a cutout so that it will be easier to align the Y axis Rods. The current design has a hole in the front brackets that you must insert the rods into. This puts inward pressure on the rods making them…
a11y 4'll : accessibility for all 11 minutes print time A keychain designed to distribute by Turkish Airlines Accessibility Team The design comes up with 4 plates; 1 unit 100% scale 1 unit 125% scale 33 units 100% scale 18 unites 125%…
It allows you to comfortably support the soldering iron during use. The holder attaches magnetically to any ferromagnetic surface and the soldering iron attaches to it via a magnet. The base has a 25mm x 10mm x 2mm neodymium magnet to…
This is a template for a spacer between HT07-4A and the factory compressor inlet pipe of a EA11R Suzuki Cappuccino. The factory turbocharger compressor inlet pipe from a EA11R Cappuccino does not clear the wastegates on Chinese clones of…
A very basic design that converts an empty 2DIN/Double DIN frame into a useful storage cubby. This was designed to be installed without a metal radio cage in place, purely just the black dash trim. It has a hole in the corner of each…
This is the non-USB model
Hi, I am sharing with you the STEP file of Doorbird A1101 intercom I made, it is helpful if you want to design your own upgrade for it, for example printable stand, just like I did, look below: I hope you find this 3D model helpful :D ---…
Made with https://Tooltrace.ai . In height 8.
This is a replacement piece that connects the extension wand to the vacuum. My vacuum model is A11 Master but I think it will work on any other vacuum that uses the same wand/piece. There is space for the 2 pin connector. Latch details…
Key chain in the shape of head gasket from the 2.0TFSI engine code BGB (EA113) I have personally printed it in a TPU since any stiff material is iritating to carry
This is a simple camera cover to block the cameras on this tablet when not in use. I've printed this in PLA and TPU but found the PLA version much better as the stiffness allows the cover to grip the rear camera, allowing the cover to…
Replacement pole hinge pin for a Rhino Rack Batwing/Foxwing awning. The OEM version of this is made of PA6 but I have printed these in ASA and PETG successfully. Use 5 Wall loops and 25% infill. To get a strong part there is a…
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
Description: This is a custom-designed sun hood for the LCD screen of the Canon XA11 camera. It clips onto the display and helps block direct sunlight, making it much easier to see your screen when shooting outdoors 🎥 The fit is made…
Print with supports and for the bottom and then print the strip in white to give it the Airbus look.
