1 / 1
Front and Rear Swaybar Bushings EA11R Suzuki Cappuccino
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Front and rear sway bar bushings for EA11R Suzuki Cappuccino.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Print using 95A TPU with 100% infill. Print standing on end. I did not use supports when printing, but you may need some support for the flange overhang. The bushings have a 0.1mm gap to serves to split the bushing; post print you will want to run a razor or thin blade down the 0.1mm post print to clean up any stringing.
