1 / 1
Front and Rear Swaybar Bushings EA11R Suzuki Cappuccino — zdjęcie 1

Front and Rear Swaybar Bushings EA11R Suzuki Cappuccino

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Front and rear sway bar bushings for EA11R Suzuki Cappuccino.

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Print using 95A TPU with 100% infill.   Print standing on end.  I did not use supports when printing, but you may need some support for the flange overhang.  The bushings have a 0.1mm gap to serves to split the bushing; post print you will want to run a razor or thin blade down the 0.1mm post print to clean up any stringing. 

Tagi