605 models
Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…
Print approx. €22.76–€27.81 excl. taxPreliminary estimate for one variant
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
(CZ) Vylepšená verze tempomatu Fialový a oranžový díl se slepí acetonem. (EN) Improved cruise control version The purple and orange parts are glued together with acetone. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill:…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
[ENG] A simple keyring with SUZUKI logo designed for three-colour printing in layers using a manual filament change (e.g. with the M600 command). It is also possible to have the name of the motorcycle inserted from the back. Therefore,…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Curled rat, second half 19th C CE, by Suzuki Masanao, now in the collection of the Minneapolis Institute of Art. improved version of an older model I fixed up.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Plastová ochrana na padací rám Suzuki Vstrom 650/1000. Vnútorný a vonkajší diel spojený skrutkou a maticami M4 - 4+4ks. Možnosť osadenia doplnkového osvetlenia. Slicer: PrusaSlicer Materiál: PLA+ Výplň: 70% Teplota: 200/60 st.C Rýchlosť…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Replacement badge for Suzuki
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Suzuki KeyChain Suzuki Keychain, made with fusion 360
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
(CZ) Vylepšená verze tempomatu pro stroje s blastery Barkbusters. Fialový a oranžový díl se slepí acetonem. (EN) Improved version of cruise control for machines with Barkbusters. The purple and orange parts are glued together with acetone.
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
suzuki swift hatrack holder for 1996 1.0 suzuki swift car (can be good for other models.. print it in this orientation for additional sreght some draft and suport may be nececary for the ears. it is 15-30 min (100% infill) print i used…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
CZ Adaptér pro montáž univerzálních směrových LED světel https://www.aliexpress.com/item/32880546232.html?spm=a2g0s.12269583.0.0.633e42a744FoPJ ). Montážní adaptéry se dají také koupit, ale na DL1000 2014 > neapasují (i když prodejci…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
For one Window you need: 2x window_frame_straight piece 4x window_frame_corner piece magnets: 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert) OR 12x round magnets, 6mm diameter, 4mm height fabric of your…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Headlight cover (ring) for Suzuki.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
My Suzuki XL7 wiper screw caps were missing, so I designed this simple cap to cover the screws to protect them from rain.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Spacer to go between GIVI Outback PL3112CAM racks and the Backcountry Panniers The prints are testet with 100% infill for thermal stability and printed in FilaLab PETG Filament and stock Suzuki exhaust. After riding in heavy slow traffic…
Print approx. €20.58–€25.15 excl. taxPreliminary estimate for PETGSource material: PET
Shifter ball bushing i recreated for my 1999 Chevy metro. Print 2 of them for top and bottom.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
A 3D printable keychain inspired by the Suzuki Fronx logo. Designed to be easy to print and practical for everyday use. Print-friendly design (no supports required on most printers) Lightweight and durable when printed in PLA, ABS, or…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
This Print-in-Place model of the famous Japanese offroader Suzuki Jimny is my second Print-in-Place vehicle with working suspension! The wheels spin too! The only thing you have to do after printing is to snip off a few tiny pillars that…
Next model in the kit car series, this time it's a Jimny kit. The car once again has all wheels fully suspended. Assembly video: here
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost. There is a file prepared for basic printers that do not support color changes within the same layer (similar to my example with an Ender 3…
Nissan car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
Keychain created for my friends Suzuki Samurai. Single and dual Extrusion models. The height of the base plate is 2mm (for dual extrusion object arrangement). Print Settings Printer: Geeetech G2S Pro Rafts: No Supports: No Resolution: 0.2…
Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD model). Mounts with one M8x 25mm allen head bolt. Simply remove the stock cover “bolt" and screw in the real bolt. Printed upside down with…
This was modeled off of a 1995 Suzuki Sidekick and should fit any vehicle with a similar dashboard center bezel. Some of the parts fit tightly and will need slight post processing. This was done to ensure everybody could print this even…
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost.
Introduction Slightly modified from the EPO PV50 (as known in Japan) the PV50 Is a cult classic moped among the youth of Finland. Finland was the biggest importer of the PV50 when it was imported from 1981 up until 2002. Though it was…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay/Facebok sellers that stole the design without attribution! If you use these files, I would…
I've created a V2 that has a better design and left and right sides. https://www.printables.com/model/451844-suzuki-jimny-cup-holder-v2 Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD…
Recommended settings tested with Elegoo Neptune 4 Plus printer on PLA material and Orca Slicer: Hot bed first layer 65°C and following layers 60°C. Use 0,4 mm nozzle. Printing temperature 210°C. Infill patterns: Rectilinear. Top and…
Use 1.75mm filament as a hinge between the parts.
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
Suzuki Hayabusa keychain, with a simple and easy design for a quick impression and low material cost.
Tapacubo para suzuki Jimny, diametro de sujeción: 108mm
This is a wide body Suzuki mini truck for display.
Message me if anything needs changing or write in comments
Voilà un logo Suzuki à imprimer en 3d, pour décoration 6,75cm de long et 6,6cm de largeur, facile à imprimer
Sencillo llavero Suzuki
copy of hubcap for suzuki vitara
This clip is a spare part for the Suzuki Swift. The original clip was a little bit loose and someday it fell down into the motor area. This happend a few times before, but this time I couldn't find it anymore :-( I designed it with…
Tachometer holder Suzuki Bandit GSF 650 S -> Naked
This is a 3D model of a trash can made specifically for Suzuki Vitara 2015 onwards models. It perfectly fits into any of the two existing cupholders in the centre console. It has a hinge that connects with a piece of 1,75mm standard…
Place fenders on the body aligning their ends with the lower edge of the body. I used a bit a CA glue to hold it in place, then drilled wholes and added M2 bolts and nuts. I did not remove all the interior parts so in some places the nuts…
3mm layer height Print upright Brim 3 walls/perimeters
This bottle mount can be easily screwed into the existing threads with a metric pan head bolt. The bottle can conveniently be reached from the driver side. Use at your own risk, especially if you have passengers.
The plastic clips from my Suzuki Grand Vitara 2012 sun visor became brittle over time and started to crack so I designed this replacement to fit inside the metal wire as seen on the pictures. The model has a 2mm slot so you can easily…
Printable brackets to store Suzuki Jimny 2019+ back seat headrests.
Print with TPU, 3 or more walls, 0.2mm layer
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote" creating the modell to Barbér Máté . Print Settings Printer: prusai i3 rework 1.5 Rafts: No Supports: Yes Resolution:…
This model contains only the files that I modified from the separated part remix found here: https://www.printables.com/model/471565-every-part-separated-in-the-suzuki-carry-kei-truck/files For the full model, you will need to print…
Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed…
Introducing a remixed Suzuki Swift Key Enclosure, innovatively redesigned to feature a clip fastening system for ease of access and future replacements. This model synergizes the practical design of Phillipnielsen's original Suzuki key…
These are parts I made myself in order to screw on the full fairings on the sv650s. The fairing hold really well eventhough I did not use the Frame Sliders. The Holder on the radiators have to be printed twice. You can choose between the…
The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…
SUZUKI Honeycomb style - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks All trademarks, logos and brand names are the property of…
no supports required had a little stringing around the pillars. It took 22hrs to print at .2 layer height with %15 infill
A remix of KTP's Isofix hook to suit the seat back anchors in an A2L/ZC33S Suzuki Swift (2018-2024). Given parts sharing between any given manufacturer's models it's quite possible this will also fit other Suzukis of the same era, but I…
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all. hardware needed: 1x M6x1.0 40mm 3x M6x1.0 20mm 4x M6 nuts 9x M6 washers installation can be a bit tedious because you cant really acces the…
A simple oil spout to drain the oil from a Suzuki 250HP outboard engine. The original was made from rubber, but it seemed like it was for a slightly different model.
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. Mirror in slicer if you need the drivers side. Profile has been modified to be stronger than OEM. Make sure to consider your material and infill. The…
I made a simple snorkel grill with a logo for my car (suzuki jimny). Stick the logo with glue. Maybe someone will like it ;)
Suzuki - Type S1 - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets All trademarks, logos and brand names are the…
A motorcycle kick stand pad for your Suzuki. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new GSXR in the dirt. Print this with plenty…
Based on an old design with slip in stacks in factory rubbers which saw a 3.5hp improvement on the dyno without tuning. Decided to improve it as multiple friends are now tracking these bikes so made a full boot replacement and improved…
I did not create this just felt it was a really good model worth sharing. Created by Sky_Lips on thingiverse
Gear knob replacement for manual Suzuki. This was designed for an Alto but will probably fit other models too. **Edit: I have now added a numbers ‘cap’ which clips over the top of the original shifter as a way to display the shift…
Suzuki Keychain w/ Logo only, hollow design Bicolor revommended
A new lamp from me, this time a SUZUKI lamp. As always with all new models from me, an additional USB-C port from AliExpress is needed:…
Air scoop for a Suzuki Samurai If you print it splitted, you need a 40x90x2mm plate to connect booth pieces.
Very easy to print suzuki sv650 mirror spacer for the people like me that can't see anything through the original ones except for your own shoulders. Just use some longer bolts and take the rubber from the original mirrors. happy riding!…
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
Jimny manual storage under the cigarette is somewhat disappointing, it is very small and feels like an afterthought. That is why I designed this, to fit 3 purposes: Make a better use of that space To hold my phone. Android Auto works like…
Suzuki GS500 (E) Front Fender. Modeled this for my cafe racer-esque bike. Tested to work with a 1996 model. It is designed in a way where you do not need to remove any parts to install it. it uses the stock mounting holes. I used black…
Suzuki Samurai Type S / S1 Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimension All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this…
Replacement Suzuki Swift ignition switch. Print with supports. Remove supports and clean up print. Optional, fill in letters with paint. Use persuasion to install new switch. Test by inserting physical key and turning the switch. If the…
Suzuki Samurai Type SL2/SL2A Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our…
Ich habe hier einen Schlüsselanhänger für Suzuki Fans entworfen. Die Anhänger können in verschiedenen Farben gedruckt werden. Die Schlüsselanhänger können schnell und einfach gedruckt werden. Beste Ergebnisse ergeben sich mit einer 0,2mm…
Print in either nylon or ASA. Both will suck, but they'll do the trick. And you need to angle the left side guard to get it to fit the build plate, but she'll go! I've included DXF files for laser cutting!
GSX-R Suzuki Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 08/06/2024 added: GSX_R_2.stl All trademarks, logos and…
Suzuki GS500 1996-2006 Cover for Clocks Skechup file included - feel Free to remix and share Category: Automotive
The first consists of two parts, the first part (I_a) is clicked on the USB from above, the second part (II_b) is slid on the first. The second cover (II) is clicked on the USB from above. The first version is possible until heavy rain,…
Holder for changing the location of the ignition keys. I had to relocate after changing the handlebars to a wider 28mm
Adapter kit for mounting aftermarket LED indicators/blinkers on the GSF 600 1200 bandits. The rear adapter is in a similar design to the stock indicator. The front one is designed to fill the gap in the fairing. Printed int PETG
This is a seatbelt alarm stopper for Suzuki Ignis. May work on other cars too. If you want to measure: The "tongue" without the handle at the end is 21 mm wide, 37 mm long and 3 mm thick. The thin parts around the hole are 5 mm on the…
Removable Suzuki shopping cart coin.
I needed to change the scraper seals of my 1992 Suzuki Intruder 800. Saw that I needed a special tool from Suzuki to hold the damper rod in place when unscrewing the bolt. Googled the tool and redesigned it in Onshape. I have made two…
![Suzuki mini pickup truck [wide body]](https://media.printables.com/media/prints/644505/images/5088033_5ed0382c-b96b-45f9-bd29-d58bc70f9b49_85a573c2-81dd-4c48-8507-8a1873cf3a91/screenshot-2023-11-11-223228.jpg)
