1 / 5
Suzuki Jimny 2018+ (GJ/HJ) magnetic rear window sunshade frame — image 1
1 / 5

Suzuki Jimny 2018+ (GJ/HJ) magnetic rear window sunshade frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€3.30 – €4.03 net (excluding VAT)

For file: window_frame_v3_0.2mm_PLA_MK3S_3h54m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.67 excluding VAT (range midpoint).

Weight reported by the author
41 g
Print time reported by the author
3.9 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A megnetic sunshade-frame for the rear windows of a Suzuki Jimny 2018+ (GJ/HJ). You need to sew fabric around it.

Rating
0 / 5
Likes
1
Downloads
39
Makes
0
Views
509
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

For one Window you need:

  • 2x window_frame_straight piece
  • 4x window_frame_corner piece
  • magnets:
    • 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert)
    • OR 12x round magnets, 6mm diameter, 4mm height
  • fabric of your choice

Printing instructions:

  • I printed it in PLA, 0.4mm Nozzle, 0.2mm layer height
  • Add a pause before printing the last 0.4mm (2 layers at 0.2mm layer height) to insert the magnets

Tags