1 / 5
Suzuki Jimny 2018+ (GJ/HJ) magnetic rear window sunshade frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A megnetic sunshade-frame for the rear windows of a Suzuki Jimny 2018+ (GJ/HJ). You need to sew fabric around it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For one Window you need:
- 2x window_frame_straight piece
- 4x window_frame_corner piece
- magnets:
- 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert)
- OR 12x round magnets, 6mm diameter, 4mm height
- fabric of your choice
Printing instructions:
- I printed it in PLA, 0.4mm Nozzle, 0.2mm layer height
- Add a pause before printing the last 0.4mm (2 layers at 0.2mm layer height) to insert the magnets
