Liczymy pasujące modele…
Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…
Another Mavic Air 2 sunshade V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length. V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must…
A Vintage Futuristic Look. With 3d printing You Can. Two Version Available Print instructions Print Best with PLA no Support 5% infill For a snug fit, you should scale model so the width of the 3dmodel is same as width of the head. (I…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.
This model allows you to locally produce/replace the ‘clips’ that hold in the various Telsa Model 3 and Model Y sunshades that are sold on Amazon. Typically, these sunshades are chinese made and are either missing their clips, dont…
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
I made a sunshade for my new DJI Mini 2 remote. It clips onto the rails of the phone holder and the top slips down over the top bracket. It's fairly secure though is does wobble a little since the sides are free-floating. Made to fit by…
A futuristic looking shade for your special event. Other Apex Shades Styles. https://www.prusaprinters.org/prints/105385-apex-03-sunshades https://www.prusaprinters.org/prints/25075-apex-2001-sunshades
There are a number of sunshades for various Lowrance Hook Reveal models, but I really wasn't satisfied with them for one reason or another. Some of my dislikes were multiple pieces, flimsy looking, prevented angle adjustment, and most…
I wanted a sun shade and killflash for my Eotech Holosights that was robust and could take a literal beating as well as stand up to heat concerns. Print with hex down, use tree supports. I recommend PC, Nylon, or HTPLA. Don't cheap out,…
Sunshade for a rifle scope. Moreover, it adds a protection for a scope lens and a nicer look :) Uploaded model (both versions) has these parameters: inner diameter: 57,0 mm outer diameter: 66,0 mm I use this sunshade for my rifle scope…
This visor is very light, prints in one piece, and snap-fits to the arms of the glasses. Worn on the glasses protects your lenses from the direct sun rays, giving you clear vision of whatever is happening on the beach (or you can wear a…
No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…
Replacement part for a Fiat Siena sunshade, the original part broke and I decided to create a 3D piece and print it Print Settings Printer: Vitofeli Grand X3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 40 Filament: Print…
I needed more clips to hold up the sun shades for my Tesla Model 3. I created this simple copy of the clips that came with the sunshades. I printed them both flat (with supports) and standing up. Both orientations seem to hold up well.…
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
Better to print it in PAHT-CF (or ABS) for better resistance to summer heat! (not in PETG or PLA)
Remixed from RobSmo's https://www.printables.com/model/305355-dji-mavic-air-2-2s-mini-2-sunshade
Sonnenschutz für das HDS 12. Zerteilen am besten innerhalb des Slicers. Zum Verschrauben habe ich Reduzierhülsen gedruckt welche nach außen drücken. Bei Fragen gerne melden.
Tested on only a handful of optics so far - please let me know if it works for you and what scope/optic you have used it on! This model is designed to be 50mm diameter - simply measure the diameter of your objective lens, divide by 50,…
Please print with ASA/ABS or any heat resistant filament. PETG is suffering during summer from heat inside car.
I designed it to be foldable for easy use and storage. I used ABS for this print because it is flexible. And you need to find a 2mm steel rod, 5cm long, to use in the joints.
A sunshade for the original mavic mini. No supports are needed and it takes around an hour to print both parts. As this is mostly friction fit, I have included 2 versions of the bracket with different tolerances. You can also adjust the…
This little clip attaches a blanket or towel to a stroller to provide some shade. The three models have a slightly different gap for one of the slots, such that they fit various strollers. I printed it in PLA with a 0.6mm nozzle at a…
Summary This is a remix of another design. This will fit the Garmin Striker Plus 4CV. Could use some minor tweaking but does what its suppose to do. Print Settings Rafts: No Supports: No Resolution: .16 Infill:25 Filament brand: PLA or…
Sunshade for Mybo Ten Zone scope. You only need a rubber band to hold it in place Pare-soleil pour scope Mybo Ten Zone . Vous avez seulement besoin d'un élastique pour le faire tenir en place Print Settings Printer Brand: Alfawise…
To use the Fusion project, the Parametric Text plugin should be installed in advance. The gap dimension is then printed on the clip so that you can print several clips with different dimensions and try them out. The gapHeight parameter…
Threaded to fit the Arken EPL4 4-16; may fit others, unsure if Arken uses the same thread pattern on different optics. This requires a well tuned printer. I was able to get good quality threads on my Bambu P1S w/.4mm nozzle. Printed in…
Basically combined a sunshade clip and sun glass holder for those of us with sunshades and sunglasses in our MY's. I'm sure there are a zillion ways to refine this and further improve it but it seems to work. Any heat tolerant filament…
Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely,…
This is a replacement for the clip that holds the car sunshade. The fourth picture shows the original part (left) vs the 3d printed one (right). Although made specifically for a FIAT Grande Punto , it can be expected to fit other car…
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
Small file for sunshade holder in Fiat Panda. I recommend printing in PET-G due to temperatures in summer. It is compatible for sure with Fiat Panda I. let me know if it is compatible with other car models.
Renault grand scenic hook for rear sunshade Print Settings Printer: Custom Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 100 Notes: Support only to bed. Print as default downloaded orientation to maximize strenght. Category: Automotive
I use these clips on our stroller to protect our child from the sun. So far, I have printed numerous clips for friends as well. I am sharing the design here. Enjoy! Protect your little one from the sun with this innovative 3D printed…
A simple hook to replace a broken one of a Renault Laguna rear sunshade. Not an exact replica of the original , probably best to print in a material that is more resistant to heat like PETG or even ABS since it gets pretty hot inside cars…
Update: Added speedo sunshade! A fairly simple model to cover the dashboard and provide some protection from the sun, when my clear windscreen arrives. Fit is perfect slide on, won't come out but probably won't stay on either. STEP files…
Uploaded two versions - 1.0mm and 1.2mm. The site renamed the stl files to 10mm & 12mm which is not correct. Print instructions I'd suggest to use PETG, PLA is not UV resistant and will be "baked" very quickly.
Nothing special as far as printing goes but I did add supports under the recessed areas (nearest to the print plate only).
I made this hood for Hikvision camera DS-2CD2T47G1-L with 6mm and 2.8mm focal lengths to prevent sunlight to burn into the picture when sun is rising, with camera looking to East. No supports needed. Use some UV-resistant material…
This is a remix of https://www.thingiverse.com/thing:2183414 by the thingiverse user dr_lecter, but without glue involved. I printed the part with PETG, 0.2mm layer height, 15% infill, and default prusa slicer settings. Use the…
A sunshade for the Fairphone 3 and the DJI RC-N1 remote control, which comes with the Mini 2 SE. I also use a smartphone holder from user NikNolte for better ergonomics ( https://www.thingiverse.com/thing:5128508 ). The shade is even…
For BMW motorbikes, there are unofficial smartphone holders with two USB charging ports that fit onto the original BMW navigation device holder and connect to the 12V power supply via the contact circuit board on the back. For these…
Printed in white PETG and did well for an entire baseball season. Please pardon the picture. It got stepped on at one point and broke and was reattached with hot staples. Still going strong though!
We wanted to cover our baby better from the light during sunny days. the model from ArnieX was detaching super easy from our stroller so I decided to make it more sturdy . hopefully this also works better for you. remix from ArnieX…
Simple sunshade for the DJI RC-N1.
Edit: 10/19 welp it broke… new model that is a little thiccer It seems like all the sunshade clips break. Here's a replacement! Printed hot and slow with ASA. .2 layer height and a .6 nozzle. Model is oriented properly and will need…
A replacement clip for the Tessories Glass Roof Sunshade . USE AT YOUR OWN RISK: I accept no liability for any damages caused to property or people as a result of this replacement part failing, or otherwise not performing as expected for…
For BMW motorbikes, there are unofficial (Chinese?) smartphone holders with a Qi wireless charging coil and two USB charging ports that fit on the original BMW navigation device holder and connect to the 12V mains via the contact circuit…
This is a set of parts to repair/replace the bungee anchors and endcaps for a porch rolldown sunshade. Mounting holes made for #6 wood screws. Bungee not included. Print Settings Rafts: No Supports: No/Yes (Needed for pipe endcap)…
For a parasol of unknown brand, 50mm stem. Lock handle and two metal pins are reused from the original part. steel pin holes needs to be drilled to 6mm Print instructions Best strengt of printed with the lock arm horizontal. see 3mf. I…
Printed it with my Prusa Core One Layer Height :0.25 Infill 40% PEDG
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
The idea came to life poolside, when I saw my wife placing her drink under the chair to shield it from the sun. This articulated sunshade umbrella is a compact, functional 3D-printable model designed to bring adjustable shade and style to…
I needed the bird spikes to latch into the rail on a Costco roll-up sunshade. So I modified the existing bracket to have a twist-lock pressure fit inside the mounting channel of the shade. I printed 2 rows of spikes only, and used a dab…
Has a goof fit for the common holes with approx. 50mm für Rotary Dryers and big Sunshades/Umbrellas. I printed it with TPU A95 and it works very fine.
This 3D-printed honeycomb sunshade is designed for 44 mm objective scopes — the actual internal fit is 48 mm to match most standard scope housings. Fits 44 mm objective scopes (≈ 48 mm outer diameter) Helps reduce glare and reflections…
Its plastic it breaks here's a 3d printed version that will save you at least 80 bucks goes together with m2 screws. Tested Works on my car. Put one piece on top of the sunshade and screw them together. Look at cad for how it goes…
Based on ehughes100 design https://www.thingiverse.com/thing:1738733 . I resized it to fit my GarminNüvi 2460. It fits snug but it is easily removable as the power on button is on the top for this model. Fits with the mount. Nüvi 2460 is…
Probably won't fit other phones, but fits my Pixel 8 like a glove. ASA recommended. Might get away with a light colored PETG. Secures behind the charger with 3M UHB tape.
So I have a Mavic mini and picked up a Lenovo m8 and a case to use as the display, but didn't want to keep taking it out of the case or dealing with the cover when connected. So I used fusion 360 to create these side panels to convert the…
This year, the clip part of the buckle gave up the ghost. I did up a quick model after tracing and measuring the original snapped off part and comparing with online official picture. Printed solid in PETG and it is holding so far. Print…
🚗 Rear sunshade holder (M6 rivet nut mount) This is a replacement for the original rear window sunshade holder used in Skoda Superb II . The original plastic part often breaks or loses strength over time. This redesign provides a more…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.15 Infill : 20% Filament : ABS
These are replacement clips for sun shades - I've tested in Vegas sun (printed with ASA) on a model Y. My kid ripped the shade down, and we lost a lot of clips. The ones I found on here are thick, and slow to print. This model should be…
For one Window you need: 2x window_frame_straight piece 4x window_frame_corner piece magnets: 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert) OR 12x round magnets, 6mm diameter, 4mm height fabric of your…
This is a sunshade for a LCD monitor from the company Dometic with the size 7". I used a homogeneous wall thickness in the construction, which is a written law in the construction of plastic components. The wall thicknesses, which are as…
This is my first make and I am very much a beginer to 3d printing and any sort of 3d modeling. I used fusion 360 and a bunch of youtube toturials to create this Tesla model 3 sunshade clip. I wanted a bit more length on the tab that goes…
The Radiomaster GX12's screen can suffer in bright light. This shade slides onto the top of the screen to shade it somewhat and make it easier to read. The shade is small enough to be kept in the suppied transmitter case. Print with 100%…
Printed in generic black PETG on MK3S with 0.4 nozzle, 0.2 mm layer height, 3 perimeters, infill 15 %. Supports on overhanging bits are easy to remove as the clip is quite sturdy. To fit your sunshade: measure the circumference by holding…
I resized the clamp, to make additional room for larger phones such as a Samsung Galaxy S22 Ultra. All of the other parts are the same as the original. Tip: Use some electricians tape on the insides of the clamps, to provide a better grip…
Self-Tightening Sunshade for Herelink Controller – Easy Installation and Enhanced Visibility. Elevate your Herelink controller with this self-tightening sunshade , designed to reduce glare and enhance screen visibility during outdoor…
Rain/snow protection cover or sunshade for NICE EPM photocells. Two versions, with bottom cut-out and full. Mounting during installation of photocell. Best print in ASA, possible PETG Print settings 0.2 - 0.25mm 15% infill
replace your sunshade knobs with whatever color you want
Sunshade holder clip for kenworth truck
3-27-2026 - I redesigned this after getting slight fitment issues. The old model was deleted and this one now fits as it should. I got tired of getting a glare on the screen of my MM3 tuner and not being able to see the screen clearly…
Left and right Remis Sunshade window blind part FIAT Ducato/motorhome
I designed this to protect my phone from direct sun light when mounted on the radio, since during the summer months it was constantly overheating. You have to remove the original phone holder "legs" on the left side of the mount, by…
The modification uses M3 nuts, ISO 4032 and M3x12 screws, ISO 1207. The cutouts for the nuts are tight. The nuts should stay in there position even when no screws hold them. A screw should be used to draw the nut into the cutout.
This is a recreation of the hooks that came in the 1997-2003 year model Audi A8 and S8 to hold up the rear door-panel rollout sunshades. I do not have dimension specifications for the original part, so I made what looks as close to the…
Introducing Sunshades!, designed to be replaceable and last for as long as you want it to! Change the colours of each part to your liking and look like a fashionista! Requires Supports for the Hinge connection on the Frame otherwise the…
Sunshade (window shutters) crank holder bracket, however, this is also s general bracket/holder for a stick of approx 16mm in diameter.
A sunscreen for the KX3 that attaches to the side rails and folds down to protect the display and controls. Designed in OpenSCAD. I printed mine in PETG. Print top and 2 side pieces and put together using 2 M3x8 self tapping screws. Shade…
The handle of our sunshade broke. So I designed and printed a new one. To attach the knob, you only need a M6 50mm bolt and 2 M6 nuts. Tighten the 2 nuts together so the knob can turn freely.
After the plastic part of the my sunshade crown has broken, a have designed this replacement. Its more massive and sturdy than the original part. The OpenSCAD is parametric and might be adaptable to other sunshade models. It requires the…
This model is designed to fit the shown sunshade stand, but may work for others as well. I designed it because one of the sleeves got lost and the sunshade couldn't be fixated anymore. The fixation is made out of several ring sleeves…
Use case The Xeigu G90 is a very popular portable shortwave transceiver for amateur radio. It's small form factor, lightweight and moderate output power makes it perfect for doing outside amateur radio activities like POTA (parks on the…
This is an adapter for a sunshade or umbrella stand. Its outer diameter is 27mm and the inner is 19.5mm. There is a little cutout for a metal piece. This where the tightening screw can grab without damaging the plastic adapter. To add the…
You can put it on your camera monitor for better visibility.
Simple sun-blocking frame for Ecobee Smart Thermostat Premium. Direct sunlight on the thermostat can greatly impact temp readings, use this to reduce the impact.
This is a basic/simple sunshade for the monitor that is included with the Ronin 4D. It's far from perfect, but it does a decent job of reducing glare on the monitor when outside. There are cutouts to ensure that all of the buttons/dial…
Our sunshade umbrella broke due to the wind. I made a quick fix that goes around the broken aluminium profile and it is holding up pretty nicely. I printed it in prusament PETG using 0.6mm nozzle, 3 perimeters and 100% infill. I also…
While it was made for the Samsung Note10+, you should be able to use it on just about any other device. If you find the screw too long, or the lower clamp too long, you can print the original clamp from the thing this was remixed from.
I made this shade to allow better view of the projected image in bright sunlight and as a protection for the glasses. Insert the glasses from the back. I printed this top down or standing on the back which needs much more support. Printed…
This shade makes shadow on your phone screen, so you can see better when flying drone. It can be attached to CMF Phone 2 Pro using screws so there is no way it will get deattached. The bump on the top allows for mounting the whole setup…
This is a remix because the slots on top of my sunshade have different widths, with one being less than the thickness of the tab on the original design. Print in PETG to avoid heat and sun damage . **Freecad file included if modifications…
This is a hinged sun shade for an iPad 11”. It is designed to use the built in magnets for the Apple pencil pro. Once printed you will need to press in four, 5mm diameter by 3mm (they could be taller than 3mm) neodymium magnets in…
sunshade for dji crystalsky 5.5" fixed nonfoldable designed for mavic contorller
