CFmoto 450MT (IBEX) Sunshade for speedometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pressfit Sunshade for the speedometer of a CFmoto 450MT
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 615
- Wydruki
- 1
- Wyświetlenia
- 1986
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against scratches, dust, and rain.
This is pressfit, so it should slide right on the speedometer. Depending on the accuracy of your printer you may need to add a thin sticking tape around the inside of the perimeter, or sand a bit away. It has a chamfer on the inside, so that it should center itself on the speedo.
If you need any additional designs for some other parts or ides on the CFmoto 450mt don't hesitate to contact me, maybe we can work something out.
I printed it in PETG.