Liczymy pasujące modele…
Suitable for models 2023 CFORCE 1000 CF1000AZ, 2023 CFORCE 500 CF500AZ-9S, 2023 CFORCE 600 CF600AZ-3SA, 2023 CFORCE 600 TOURING CF600AZ-3LA, 2023 CFORCE 800 XC CF800AZ-2A, 2023 UFORCE 1000 CF1000UZ, 2023 UFORCE 1000 XL CF1000UZ-2, 2023…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…
Sunshield for CFMOTO MT800 First put the upper part and fit the lower part afterwards Holes in the lower part for water drainage
Screen shade for CFMOTO 650MT / Adventura 2022+ model with TFT display. Can be fitted with original plastic rivets. I used standard PLA and 0,2 nozzle for good logo design. Model with Hockey Kladno logo and without.
CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.
0.1mm layer height. Print without support.
I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…
This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…
Extensor de parabrisas para CFMoto 800MT, usa insertos para Plastico rosca M6 Impreso en PETG 3 perímetros Infill 30% Honeycomb
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
CFMOTO 450MT oil drain Machining of skid plates is required. Some skid plates cannot be mounted.
I was tired of having mud in the mounting holes after every ride. So I created a cover that just plugs into the holes. Print so that the top of the model touches the bed. PEI bed is best as it has a texture similar to a luggage board.
CFmoto Cforce Threaded Funnel with breather. Will fit 625EPS and similar.
Mount to attach garmin xt2 to a mt450 via the stock dash bolts. I used m4x25 to mount the garmin charger. PETG 0.2 35% 10 walls 5 top and bottom
The fork preload adjuster for the CFMOTO 450MT / IBEX 450. It’s designed to fit very tightly, so you need to tap it in with a hammer during installation. Once installed, it stays in place securely unless it receives a direct hit. I’ve…
Tank Cap for CFmoto ATV limiting, reducing, expanding cap pre lock cap for ATV CFmoto
I printed it in both PLA (for prototyping) and ABS and ASA. Used a 0.2 mm layer height and 30% Crosshatch infill and 5 walls all around. The holes are designed for M3 heat set inserts (i used the CNC kitchen ones in mine) You will also…
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
Print 100% infill, doesn't make sense to print hollow.
Kvůli špatné viditelnosti dozadu přes zpětné zrcátka jsem vytvořil tento model. Toto navýšení o 2 cm je dostačující pro lepší viditelnost. Výška vrstvy: 0,2 Perimetry: 3 Plných vrstev: Vrchní 5 Spodní 4 Hustota výplně: 20% Vzor výplně:…
This is a frame-side replacement for the seat bumpers on the ibex 450/mt. If using these, you will want to remove the two pads on the seat (if not lost already). It prints in connected halves that fold into the final piece to avoid the…
Simple plugs with holes to guide blinker/licence plate light cables through the hole blocking water/dust/mud and other bad things. Printed in TPU 95A, 100% infill (for maximum water-tightness) Any harder materials might cause issues with…
Rubber damper for the seat of your CFmoto 800/850/1000 ATV. After some time they are wearing out, so it is good to have a spare one around. Original part number: 8030-130211 Recommended print settings: material : TPU or any other…
Future Eyes button holder for the CFMOTO 450MT IBEX motorcycle. In the photo there is a button from Future Eyes F20P
This tablet mount was designed specifically for the CFMOTO 450MT and fits the Samsung Galaxy Tab Active3 (8") . It provides a stable and secure mounting solution for using your tablet as a navigation or control device on the motorcycle.…
Suporte Comando Luz CFMOTO 450MT para aplicar sem a proteção de mãos original.
Soporte de asietno de una cfmoto 450mt
I recommend printing in ABS and using acetone to get nice smoothing. Way cheaper than buying off suppliers (~$25) and more color variety. It does not have the clip section like the injection molded version, but its kind of unnecessary.…
Simple model that lets you mount your Carpuride w603d and a tire pressure monitor to an ibex 450/450MT. It includes a camera mount for the front camera. The windshield is still fully adjustable and just clears the camera wire when fully…
Owners of this particular Bashplate who tried to lift their bike will know it's basically impossible to lift the bike evenly with a standard flat-lift. For me it leaned backwards + to the side-stand side. I printed it in TPU 100% infill…
Wheel caps for CFMOTO Gladiator. The front and back covers have different depths. The logo is printed separately and then I glued it with superglue. PETG and the filling 25% is OK. Tested on CFMOTO X625-A.
This is a custom frame insert for the 450SS and SR models. You will need 2 of them as they are copied versions of themselves. Recommended print info: ABS Filament, Acetone Curing (If you want a polished Finish), Topmost Ironing (To avoid…
CFMoto 450MT, Rear Rack Dash Cam Mount. Printed with PETG Filament. Include Fusion 360 Design File for Model Remix. Material Needed : 8 x M3 Heat Set Inserts, 4 x 8mm M3 Bolt & 4 x 15mm M3 Bolt
Remix - angepasst für eine CFMoto 450S mit Frontbügel
Supports to mount external light to my atv (CfMoto Cforce 600). Easy to print and mount. Better to print with PETG
UMM2028 system is just a name to group compatible models. Uses 20 mm horizontal x 28 mm vertical hole spacing. Needs longer than stock screws for mounting to top of stock console. Needs M3 melt inserts for mounting the additional mounts.
Model already oriented for printing You can add a color to the logo layer just like I did
This is a cover of a small toolbox in CFmoto 520 (new - 2024 and up). If after every muddy trip, you end up with a small toolbox full of mud - that cover is what you need. Recommended printing settings material: PETG layer height: 0.2mm…
Dies ist eine Abdeckung für den Front oder Heckträger der CFMoto CForce 450 Wurde mit PLA 60% Infill Gedruckt
I bought These Decorative Frame Hole Covers from Aliexpress and needed a collar to go in the rubber gromet collar, so just quickly made this up though probably not even needed but I hate deforming grommets with screws. I only had 25mm M6…
Voici mon travail pour installer mon écran Carpuride W702plus sur ma CFMoto 800MTES. Il y a les plans Solidworks et le gcode PrusaSlicer pour du PA12 Sunlu, buse HF0.6mm
Well well well, a rather dumb idea, isn't it? (Update after a month of use) It's a rather good idea. It recently survived a pretty bad crash which tore off the bottom of a Shad SH37 top case and sent it flying, the cutting board shows…
Schutzkappe für das Zündschloss der Cforce 450, passt evtl. auch bei anderen Modellen. Gedruckt aus TPU 85A
On the CFMOTO 700 MT there was no way to use a clip/claw phone holder on the windshield bar. It was too slim and to smooth. I redesigned the bar what is basically adding thickness to the middle of that bar. So the connection points stay…
CFMOTO 650 MT/Adventura GARMIN Power-Switch mount I burned out a Healtech Electronics relay module. Don't know how. Supply fuse never blew. Some internal component failed. Ran fine for a year and a half. Now I needed something different.…
This key cover is modeled after the stock key that comes with the SXS. I wanted a red cover that would be more visible if it was dropped or misplaced while outside so I made this and printed in red TPU. I printed with manual snug grid…
Ergonomic mount for the spotlight switch that gives the rider quick access to the high beam switch to dip the lights for on-coming traffic. This mount molds and screws to the bike using the original mounting screw for the indicator…
CFMOTO 650 Adventura / MT Garmin ZUMO XT GPS Mount I drew this up in AutoCad and SendCutSend laser cut this file out of ¼" thick 6061-T6 aluminum, I then cut out my washers, deburred, primed and texture painted. From my seat height and…
Have a nice day, everyone! I won't be wrong if I say that I know no one owner who is satisfied with the stock rear shock mud cover. As of April 7th, there is no available tuning on AliExpress or anywhere else to address this issue. Need…
Printed in PETGCF have been using it without issue. Plate adds way more rigidity than I anticipated, so its overbuilt. New to designing in 3D, model may be horribly optimized. I really have no idea what I'm doing.
Have a nice day, everyone! Replacing the original front sprocket cover is quite a popular tuning; nevertheless, I didn't find a particular set especially for the MTX, but found many options for the KTM 790/890 and others. The front…
Llave reguladora de Pre-Carga para CFMoto/Ibex 450MT Regula con facilidad la Pre-Carga de la suspensión delantera de tu motocicletas CFMoto 450MT, con esta llave Tipo Circular o Tipo Cruceta, hemos incluido una marca indicadora para que…
The ultimate wall-mounted key holder for CFMOTO 450MT-RX owners and adventure riders! Tired of misplacing your motorcycle keys? Upgrade your garage, entryway, or man cave with this stylish and practical key rack. The model features a bold…
CfMoto 450mt front brake reservoir
CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation Rear Tail light is hard to see if someone is riding behind you. Safety First. Don't want to get rear ended. All my friends say my stock tail light is hard to see when they are…
The AliExpress tail tidy is not compatible with the Westwind luggage rack . The turn signal hit the rack, so I designed some repositioning brackets. For better wire management, I have designed a cover over the tail tidy thing that also…
Have a nice day, everyone! Just a simple tool for a fast chain-tension check. According to the manual, when pulling the chain down, the distance between the chain and the lowest point of the swingarm should not exceed 50 mm. In my humble…
Printed with 82A TPU, and 50% infill seems ok. With 95A about 25% is better. At 10mm height, go to 0.10 mm layers for better shaped tip.
This is a GoPro (Action Cam) mount for CFMoto Motorcycles which can be mounted onto the Gas-Cap Ring for awesome On-Board Shots that were inspired by racing Angles Because this is mounted on top of the Ring instead of replacing it, you…
3d printed replacement for original rubber mirror plugs(i lost one) with a small indent for easier removal
Have a nice day, everyone! First of all, this project is more about how to mount an oiler on the 800 MT-X than a solution that will fit everyone. I originally designed it for a PDOiler that had been used on a V-Strom since 2018 (if I'm…
A sleek, wall-mounted key holder featuring the prominent CFMOTO logo. This practical 3D model is designed with a sturdy rectangular base and features five integrated lower hooks, making it perfect for organizing keys, lanyards, or light…
Have a nice day, everyone! I like to use phone navigation when I ride, but I'm not a fan of handlebar mounts because I find them dangerous, IMHO. So I decided to buy a popular shockproof phone holder and mount it onto the big navigation…
Petite plaque à coller avec du double face sur le protège main droit des Cfmoto 800 MT, MT-X. Pour le bicolore, faire une pause à la 9 eme couche. ( 2.5 gr et 8 min d'impression ) N'hésitez pas a faire un retour ;-)
This is a special spacer to stop the tablet and mount from bouncing around when going over rough terrain. The spacer works by spreading the load over the whole top cross section of the instrument cluster/tower. The 450MT's tower is made…
This remix adds a RAM mount adapter to the original CFMOTO 450MT windshield anti-shake plate. The modification provides a mounting point for a RAM-compatible phone holder, positioning the phone above the bike’s instrument display and as…
Printed in PETGCF have been using it without issue. Plate adds way more rigidity than I anticipated, so its overbuilt. New to designing in 3D, model may be horribly optimized. I really have no idea what I'm doing.
### CFMOTO 800MT RUGGEDIZED NAVIGATION BRACKET (V3 PRODUCTION MODEL) This is the fully ruggedized, production-ready V3 design for the CFMOTO 800MT. It is engineered specifically to interface with standard Quad Lock motorcycle mounts,…
