CFMOTO 800MT-X Windscreen Buffeting Deflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the forks.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 305
- Wydruki
- 0
- Wyświetlenia
- 1004
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Open Community License v1
A small 3D printable wind deflector for the CFMOTO 800MT-X.
This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this)
I am not a professional designer, but I made this for my own bike and printed it for testing. Use it as a starting point, improve it, remix it, or print it as is.
Notes:
Designed for the CFMOTO 800MT-X
Intended to reduce helmet buffeting
Keeps the screen area smaller than a tall touring screen
Best printed in a heat resistant material
Test fit before riding
Use at your own risk
M8 Screw for mounting area
You will need to print a separate cylinder/spacer for the screw to stabilise the deflector. Height is your call, just dont overtighten it or you break your own print. Mine was 50 mm. (picture attached)
Suggested materials:
PETG, ASA, ABS, or another outdoor/heat resistant filament. Avoid PLA if the bike will sit in the sun.
Keywords:
CFMOTO 800MT-X, CFMOTO 800MTX, 800MT-X, motorcycle wind deflector, windscreen deflector, fork wind deflector, helmet buffeting, wind buffeting, wind noise reduction, adventure bike, ADV motorcycle, 3D printed motorcycle part, 3D printable motorcycle accessory, DIY motorcycle part