CFMoto Ibex 450MT Seat Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the seat bumper that tends to fall out when removing the seat with a frame-side bumper.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 1176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a frame-side replacement for the seat bumpers on the ibex 450/mt. If using these, you will want to remove the two pads on the seat (if not lost already). It prints in connected halves that fold into the final piece to avoid the need for supports.
I printed with Siraya Tech TPU Air with the “75a” profile, 3 walls, 40% gyroid infill and it's pretty close to the original pad's squishiness, but you may need to play with print settings if using a typical 95a TPU (2 walls 35% infill maybe?).
Original fusion file included if you want to make any adjustments.