38 modeli
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.
0.1mm layer height. Print without support.
I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…
This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
CFMOTO 450MT oil drain Machining of skid plates is required. Some skid plates cannot be mounted.
Mount to attach garmin xt2 to a mt450 via the stock dash bolts. I used m4x25 to mount the garmin charger. PETG 0.2 35% 10 walls 5 top and bottom
The fork preload adjuster for the CFMOTO 450MT / IBEX 450. It’s designed to fit very tightly, so you need to tap it in with a hammer during installation. Once installed, it stays in place securely unless it receives a direct hit. I’ve…
If you’ve installed a tall windscreen on your 450MT/IBEX and want to prevent any play in the windscreen adjustment mechanism — and your motorcycle is equipped with a 22mm navigation mount — I have a solution for you. Attached is a model…
Recomendación imprimir en PetG para mejor resistencia UV. Cualquier configuración básica para petG debiera entregar un buen resultado
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
Print 100% infill, doesn't make sense to print hollow.
This is a frame-side replacement for the seat bumpers on the ibex 450/mt. If using these, you will want to remove the two pads on the seat (if not lost already). It prints in connected halves that fold into the final piece to avoid the…
Simple plugs with holes to guide blinker/licence plate light cables through the hole blocking water/dust/mud and other bad things. Printed in TPU 95A, 100% infill (for maximum water-tightness) Any harder materials might cause issues with…
Future Eyes button holder for the CFMOTO 450MT IBEX motorcycle. In the photo there is a button from Future Eyes F20P
This tablet mount was designed specifically for the CFMOTO 450MT and fits the Samsung Galaxy Tab Active3 (8") . It provides a stable and secure mounting solution for using your tablet as a navigation or control device on the motorcycle.…
Suporte Comando Luz CFMOTO 450MT para aplicar sem a proteção de mãos original.
Soporte de asietno de una cfmoto 450mt
Owners of this particular Bashplate who tried to lift their bike will know it's basically impossible to lift the bike evenly with a standard flat-lift. For me it leaned backwards + to the side-stand side. I printed it in TPU 100% infill…
CFMoto 450MT, Rear Rack Dash Cam Mount. Printed with PETG Filament. Include Fusion 360 Design File for Model Remix. Material Needed : 8 x M3 Heat Set Inserts, 4 x 8mm M3 Bolt & 4 x 15mm M3 Bolt
AOOCI U7 Mounts for CF Moto 450MT plus a mount for the front dash camera
UMM2028 system is just a name to group compatible models. Uses 20 mm horizontal x 28 mm vertical hole spacing. Needs longer than stock screws for mounting to top of stock console. Needs M3 melt inserts for mounting the additional mounts.
Well well well, a rather dumb idea, isn't it? (Update after a month of use) It's a rather good idea. It recently survived a pretty bad crash which tore off the bottom of a Shad SH37 top case and sent it flying, the cutting board shows…
Ergonomic mount for the spotlight switch that gives the rider quick access to the high beam switch to dip the lights for on-coming traffic. This mount molds and screws to the bike using the original mounting screw for the indicator…
Llave reguladora de Pre-Carga para CFMoto/Ibex 450MT Regula con facilidad la Pre-Carga de la suspensión delantera de tu motocicletas CFMoto 450MT, con esta llave Tipo Circular o Tipo Cruceta, hemos incluido una marca indicadora para que…
The ultimate wall-mounted key holder for CFMOTO 450MT-RX owners and adventure riders! Tired of misplacing your motorcycle keys? Upgrade your garage, entryway, or man cave with this stylish and practical key rack. The model features a bold…
CfMoto 450mt front brake reservoir
The AliExpress tail tidy is not compatible with the Westwind luggage rack . The turn signal hit the rack, so I designed some repositioning brackets. For better wire management, I have designed a cover over the tail tidy thing that also…
Printed with 82A TPU, and 50% infill seems ok. With 95A about 25% is better. At 10mm height, go to 0.10 mm layers for better shaped tip.
This is a special spacer to stop the tablet and mount from bouncing around when going over rough terrain. The spacer works by spreading the load over the whole top cross section of the instrument cluster/tower. The 450MT's tower is made…
This remix adds a RAM mount adapter to the original CFMOTO 450MT windshield anti-shake plate. The modification provides a mounting point for a RAM-compatible phone holder, positioning the phone above the bike’s instrument display and as…
18.03.2026 Update I made minor cosmetic changes to the top part and increased the distance between the top and bottom parts by 1 mm to extend the lifespan of the TwinAir filter 28.02.2026 Update I have added a new Intake throat_V2 I…
If you’ve installed a tall windscreen on your 450MT/IBEX and want to prevent any play in the windscreen adjustment mechanism — and your motorcycle is equipped with a 22mm navigation mount — I have a solution for you. Attached is a model…
18.03.2026 Update I made minor cosmetic changes to the top part and increased the distance between the top and bottom parts by 1 mm to extend the lifespan of the TwinAir filter 28.02.2026 Update I have added a new Intake throat_V2 I…
