1 / 3
CFMoto 450MT Acerbis Bashplate Adapter for Lifts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter between Acerbis Bashplate and Lifts with Flat surface
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 366
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Owners of this particular Bashplate who tried to lift their bike will know it's basically impossible to lift the bike evenly with a standard flat-lift. For me it leaned backwards + to the side-stand side.
I printed it in TPU 100% infill but it's a bit wobbly, Solid PLA would probably work better. I don't think anything other than 100% infill will be able to hold that bike. Around 180g of filament is used.
But hey Bike is now almost perfectly level (a bit too much front-lean but it's ok, rear is serviced more often anyways)