CFMoto 450MT (Ibex) topcase mount stencil for SHAD

Well well well, a rather dumb idea, isn't it?

(Update after a month of use) It's a rather good idea. It recently survived a pretty bad crash which tore off the bottom of a Shad SH37 top case and sent it flying, the cutting board shows zero damage.

This thingy right here allowed us to mount a SHAD top case to the CFMoto 450MT my friend has. Fairly simple, we used a $3 polyethylene cutting board, $2 worth of bolts, and it's been holding up well for 2 months now, comparable to the $100+ wannabe adv mounts on chinese online marketplaces.

Bolt lengths:

• Front: current length + 20mm spacer + cutting board thickness
• Rear: 5mm (?) + 8mm + cutting board thickness

You can use this even without a top case, you can have a good enough platform for your bags, makes for a decent luggage rack. True adventure rider wannabe mad max style is mounting a milk crate, but we've grown out of that.

How to use:

1. Go buy some M8 bolts.
2. Print with no bottom or top layers, only walls and grid infill to save material.
3. Get a cutting board and align the front of the stencil with the edge of the cutting board, this will fit flush, as seen on the pics. The small holes are for finding the center line, which you can draw when you measure the board.
4. Mark and drill whatever you like and fits. Check if your nuts will fit under the board before you drill. ;)
5. Make the rear holes deeper with a dremel so it levels the bolt heads, if needed. The front ones didn't interfere with our mount.
6. Bash the spacers in, they will make for a flush fit.
7. Tighten everything.