Gromet Collar For CLX700 CFMOTO Motorcycle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a Collar to go into the rubber grommet collar when adding decorative covers from aliexpress
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I bought These Decorative Frame Hole Covers from Aliexpress and needed a collar to go in the rubber gromet collar, so just quickly made this up though probably not even needed but I hate deforming grommets with screws.
I only had 25mm M6 screws so I made two files the one titled "half" passes halfway through the hole and has thinker base is because I placed one on inside and out to make up the space needed so I could tighten down the cover, otherwise if you have shorter screws just use the Full pass through collar. The thicker ones will cause the face of the seat release key hole to be slightly recessed, but it doesn't bother me much.
If using the collar sor another project dimensions are in photo with the full having a 2mm thick base and half depth having 4.5mm thick