1 / 22
CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation — zdjęcie 1
1 / 22

CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
1
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

CFMOTO 650 MT/Adventura Tail Light-Turn Signal Consolidation

Rear Tail light is hard to see if someone is riding behind you. Safety First. Don't want to get rear ended. All my friends say my stock tail light is hard to see when they are behind me.

I am removing the stock tail light and replacing it with a new modified LED setup. New LEDs are DOT approved.

 

This thing has some pretty weird compound angles. I used a set of calipers and a protractor to decode the measurements. Once this base piece fits my bike, I will start on the LED light housing that will bolt to this base.

 

The LED modules I will be using are from FENIEX.

These ones listed below only have White-Amber-Red-Green options. (No Blue on my personal bike. PoPo don't like that.) For this set up I plan on using 3 of these modules and only use the Amber-Red lights. Red for stop light, and Amber for turn signal.

 

https://www.swataralights.com/product/in-stock-limited-quantity-green-feniex-q3/1454?cp=true&sa=false&sbp=false&q=true

 

Previous setup with Titanium bracket. (pics below)


 

As you can see the Stock Rear Tail light is hard to see. Even without the mount for the back. (see below)

All Red lights on when braking. (see below)

Normal operation, amber running lights, and center red running light. (see below)

 

This is all accomplished with the standard wiring and no funny stuff. Only clipped the end of the connectors and wired in using Wago's.

 

 

Tagi