Liczymy pasujące modele…
Everyone's favorite Counter-Strike map de_mirage turned into a small succulent planter. This particular map version is from Global Offensive (CSGO). I really like admiring this from every angle, so I put the whole thing on a small…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
You want to presentate your prints on a very elegant way but you have no turning table? Here is the answer. All you need is a 3D Printer, a 608 Bearing (O-Diameter: 22mm; I-Diameter:8mm), some rubberfeets and a sewing thread (about 40cm).…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
A key Turner that fits most standard keys, currently working on another for bigger keys. Made using Tinkercad. It has two holes to hang from your key. Most people that suffer from arthritis struggle using keys, myself included. If you…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
This box uses an unusual thread consisting of a cycloidal gear and dimples in a very shallow spiral to make it take 100 turns of the handle to take the lid of. It's designed this way purely to take a long time to open and be…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
This coin is used to help players keep track of whose turn it is while playing a game of chess. It is 50mm in diameter and 4 mm thick. Printing 0.2mm Layer Lines No Supports PETG/PLA No Brim Color change at the 2.2 mm mark. This it…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple bracket to hang the Elegoo Saturn 4 Ultra print plate to allow resin to drip off.
UPDATED - The new version has a slot cut out to fit the updated 16K build plate (the one with the ears) and I am including a mirrored copy in case you want it to hang in the other direction. I built this remix up from scratch. I have…
Print 8 of these clips (or more) to attach a fermentation belt to your at. I recommend using some kind of plastic that handles heat well, so plan jane PLA might not be the best choice. Picture is ASA filament. Fermentation built I used…
Fractal Vise for use with Revopoint Dual Axis Turntable I designed this around Teaching Tech's already excellent fractal vise. Hardware used was focused on what I already had on hand. STEP file included so you can modify to your heart's…
These strobe disks are for checking/adjusting the speed on your turntable, assuming it doesn't already have this feature. When using the applicable disk, viewed under fluorescent or other 50 or 60hz light (neon or similar) with your…
Picture frame turn button to hold the backing on to a picture frame. To be used with a #6 screw.
Turntable Pickup/Cartridge Alignment Tool: clamp it on your cartridge and align it with a free cartridge alignment protractor! You can download a gauge for free and without creating an account e.g. on:…
It is not uncommon for resin components to fall over during post-hardening. My rotary table can help. It is equipped with holes for M3 threaded inserts to attach holders to the table. so everything stays where it should be
360° Drehteller, Drehständer, Drehplatform, Fotografie, manuell oder elektrisch mit Hintergrund Habe hier einen drehenden Teller für Fotografie oder 3D Scan gebaut. Der Hintergrund ist perfekt zum Fotografieren für Modelle. Passend dazu:…
I designed Malmö's landmark in Fusion 360 and it was a lot of fun. Especially the 90° turn of the building. The windows not so much :) I scaled the print to 180% because of the thin beams at the pointy side of the building and cut in in…
SATURN You can chose your preferred sizes by changing it in fusion parameters eg. (diameter, height, width, thickness of the walls…) It can be few rings in one installation You can also pick which walls should light. Tips and…
…Please at least be sure to hit like & post a make, I'd love to see your prints! Print it on an FDM machine, cut it up & print on your SLA printer. Helps stop splashes & drips going places where they shouldn't. Print on FDM in PLA with…
I searched high and low for a 90 Degree return jet for my pool, couldnt fine one, so here is my design. I was having issues where my pool would collect leaves and debris in the corners and my return jets wouldnt clear them out. Here is my…
Here is a mod to showcase the use of the Saturn 2 Riser project . This allows pass though of the InkBird temperature sensor and power for a fermentation belt to be a vat warming system. requires 2 m3 bolts and nuts. The outlet section of…
I saw the Nozzle Size clips from GuyH, but i didnt like the idea of having 20 Clips. So i made a turnable nozzle label. Works with the 6 available nozzles from Prusa, so i only made this version. This version features a snap in mechanism…
Simple 80x80x8mm box with beveled edges meant to be a good size and height as a spacer when installing new PFA/FEP film. Designed for the Elegoo Saturn IV Ultra/16K, But should be well enough for other 10" resin printers. I made mine out…
Hi folks, I found gltovar's original model for the Saturn 2 and thought it'd be a great solution for my Saturn 1 while trying to print in the middle of winter. Unfortunately, the Saturn v1 has different tank dimensions than the Saturn 2,…
cartridge alignement protractor, Baerwald type. Imported from Entropy4U @thingiverse
…Please at least be sure to hit like & post a make, I'd love to see your prints! Here is my design for an automatic thermostat controlled & fully programmable PTC heater system mainly for the Elegoo Saturn S & OG printers. I have included…
150mm Turntable with variable steps (2038steps) and browser interface How to use You can either use the browser interface by simply pressing the buttons and setting the steps, or you can connect a push button to move the stepper motor.…
Design Concept The 3D Scanning Turntable is designed to hold objects securely for accurate 3D scanning. Its simple yet effective design allows for a smooth 360-degree rotation, making it suitable for various scanning applications. The…
Replacement covers for Roto Centro 100 bottom pivot hinge of an old tilt and turn window (Internorm) Deutsch: Ersatzabdeckungen für das untere Ecklager von Roto Centro 100 Beschlägen eines alten Dreh-Kippfensters von Internorm Printing…
This is a variable turning train for wooden trains and rails. This part is compatible with Ikea wooden rail, Lidl playti
This is a simple penholder for your Prusa i3 mk2s printer. It will convert it into a fully functional Pen plotter without disassembling anything. The Slic3r settings are given. (See the PenPloter_Slic3r_Config.ini and config_Bundle files)…
What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…
Nocturnal is an instrument used to determine local time based on the relative positions of two or more stars in the night sky likea measurement-devices ;) Instructions for use: Set the current date using the small arrow (each month is…
in a few days, I will upload the video for this project. This Is a tool designed to help you turn wooden rings on a commonly sold mini-lathe. be careful not to overtighten the chuck otherwise, your ring will be likely to break as you turn…
A pair of heater mounting brackets for the Elegoo Saturn 3 Ultra Resin printer, using a specific pair of off the shelf 12v 5 amp heater units. https://www.amazon.com/dp/B0BL6WZPM9?psc=1&ref=ppx_yo2ov_dt_b_product_details…
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
Improved clips for fermentation band
Three support‑free prints snap together into a silent, belt‑free turntable optimised for photogrammetry and laser scanning. No screws, nuts, or washers — motion is handled entirely by off‑the‑shelf metric bearings press‑fit into the…
Heyho Yesturday I came up with the desire to create my own turn table xD So here it is! Features Strong : I designed this Table to hold quite some weights. The main tolerance/ wiggling will be due to the bearing itself. In my tests I…
Description This beautifully designed 3D-printed turntable is perfect for adding a dynamic touch to your decor or bringing practicality to your projects. Whether showcasing your favorite figurines, organizing small items, or even…
In the process of creating a vat holder ( https://www.printables.com/model/638965-saturn-3-vat-holder ), I needed to first make a simplified (simplified because the top is sealed and I did not measure nooks and crannies of the inside)…
2D Art of the Death Star from Return of the Jedi. I used it for wall art, recommend printing in black.
These turning tools were designed to use at a potter's wheel for forming and trimming purposes. 100% infill is recommended. Print with the handle flat against the print bed and tip pointing up.
This is a remix of the Bear Exxa extruder cover that adds a small peg that prevents the Dragon hotend from turning. This is achieved by a the addition of a small peg that locks down into the structure of the dragon hotend and holds it…
Another variation of the Woodturning Bowl 04. You might call this one the sleeper bowl. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and…
Three simple yet effective turn knobs for M5 hardware: countersunk bolt, hex bolt and double nylock nut. The tri-wing design allows for a good grip and high strength. After printing, insert a nylock M5 nut into the bottom cavity (use…
I was challenged to create a turntable (lazy susan) to fit over the fire pit in the middle of a table. The result came out better than I expected, so I've modified the design to work for anyone. Each of the seven segments takes up nearly…
A fun 3D printable model inspired by a famous mischievous alien character! This figure comes in a single-color version , so you can enjoy painting it with acrylics, markers, or an airbrush – a creative project that kids will love to join.
This is experimental design allow using the Moose scanner with the Multi-Axis-Turntable. The position have been optimized for having excellent distance needed for the Moose scanner. The best position is the hole in the middle. For smaller…
Designed as a more airtight solution for the Saturn v3 vat, havent actually tested this print yet as mine is a Frankenstein of different parts of this. Very simple print in TPU on Ender 3 and glue the lid to the lips and your good to go,…
Elegoo Mercury Plus Turntable Shelf Designed for use with the original metal plate and an old CD blank . (Tip: Lightly score the holographic foil and remove it easily using sticky tape.) Printability: The model can be printed without…
This is an unofficial, fan-made model . The Return to Castle Wolfenstein name and logo are trademarks of their respective owners. This model is shared for personal, non-commercial use only and is not endorsed by or affiliated with id…
Actually, everything is self-explanatory: A 3D turntable: You don't actually need extra ball bearings. If you print the balls at a high resolution, it runs really smoothly. A bit of silicone spray, and it works even better. If you own a…
Two sets of replacement rivets for a Lionel 1121 O27 Turnout. First set is a little long with the intent being one could melt the rivet closed. Second set is a near perfect fit, and can be secured by gluing the 3 printed end caps.
It is designed to try to autocenter the spool (but due to varies spool sizes it is very difficult to find a perfect design). I reccomend to glue with VHB tabe the assembly on the bottom center of the pot. Print settings: To be printed in…
designed for 3D Scanning Marker by @firstgizmo A variant of the "ThreadToThread" part designed to be screwed directly into the threaded holes of the Revopoint Dual-Axis Turntable (which correspond to the M6 standard). Several heights are…
a Saturn V I made for class with USA replaced with Canada
I created this little Tool to change my FEP / PFA Foil on the VAT of my Elegoo Saturn 2. worked fine, so I decided to share it. Easy fast print, no fiddling around with finding the right type of packing stuff to shim under your VAT Foil.…
Ideal accessory for painting and decorating ceramics or other things. It can also be used for scanning and photographing small objects, thanks to the swivel base. Printed with ASA Layer height 0,2mm 3 perimeters Minimum 20% fill rate I…
Turntable based arround a bearing 62 (od) *40 (id) *12 (h) and a round cutting board
ryobi quick turn screwdriver Bitsholder for ryobi quick turn screwdriver One model have 8x3 magnets embedded inside ( Do the layer change at 21 layer ( 4.20 mm ) ) And there is a "standard" model that dont use magnets Update: There was a…
Hello, this is my version of a turntable. This turntable is controlled by a Arduino Nano and a Nema 17 stepper. My purpose is to use it for 3D scanning with FlexScan3D or with my Shining 3D Einstar. The Tabel has a outer diameter of…
convert the prusament spool half on a turntable for your 3dscans or more ! Print on the given orientation by the stl files, no need of supports. There are no bearings, just surface contact, may add a bit of oil for a smoother rotation.
This is a replacement tray for the Galaxy's Edge Luke's Return of the Jedi Legacy Lightsaber case. This replacement tray repositions the saber to the center of the case for display. Uses the original fitted tray cloth. This is for the…
Print the stamp face in TPU and the handle in anything else. Use a bit of glue, or foam tape to mount the stamp face to the handle. The original stamp handle was rescaled to 70x38mm to match the stamp face.
These are two brackets, left and right, for placing on the rear corners behind the taillight. You can mount 8 to 10mm turn signals in them. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 0.3 Infill:…
Case for a generic kindle page turner not sure if this will fit everyone but this was designed around this page turner.
This turntable can be used for anything
This is my take in designing turn lights for a Yamaha TTR250. They need to be printed in two parts (body and cover), and mirrored for L/R indicators. This design has a 12mm hole for bulb fitting. No Support required 0.2mm layer 0.4mm…
This is a turntable system that you can create using on-hand resources and some 3D printing. You print the boxes and rollers, and you attach them to the piece of cardboard or wood of your choice. These rollers are adjustable for whatever…
knob with cutouts for added grip, using an M6 insert for securing a bolt in place. printed using Generic Grey ABS, 40% grid fill, 4 walls. i found that the added weight from the infill and extra walls helped it feel more like the original…
I needed to have a table that turned on its own to present my newest and latest benchy, it's not the most reliable since it uses a string to transmit the rotation but it works. I chose to use a string or the vibrations would be too…
This turntable uses the TYJ50-8A7 synchronous AC motor, used mostly in microwave ovens to rotate the food plate. It can be directly connected to 230 V AC and has some 5-6 rpm, which is just rigth for video purposes. It can be bought on…
Trade in your plastic pots in favor of soil blocks! I love my Ladbrooke soil blocker but I needed a few more when having helpers get ready for planting. This design features the use of heat inserts and springs to create a durable and easy…
Star Wars Return of the Jedi
This is a remix whereby the mount is changed to that popular mount (here: https://www.thingiverse.com/thing:3020026 ). NOTE: This is a remix from https://www.thingiverse.com/thing:4649148 (edit tool does not let me attribute correctly!)…
10 (ten) new LACK tables in the house and I know how cumbersome it is to screw in the legs. That pain 40 times? 😣 There must be a better solution, … so here it is: LLTT — the ultimate LACK Leg Turning Tool Printing PETG, 0.4 mm nozzle,…
This is a replacement feet for Technics linear tracking turntables. I know for sure it works with SL-J1 and SL-J2, but I suspect it is compatible with all linear tracking models. It reuses the original spring and screw and is designed…
When printing remember to print in vase mode if you do not want the internal filling!
photo is project and secnd is koncept
draai-ding handvat voor zonnescherm. 2 helften die je aan elkaar kunt klikken en met zipties vast kunt zetten. Print in place (de gaten vormen de support voor de pennen). twist-thing handle for sunscreen. 2 halves that can be snapped…
I recently broke the little arm on my acrylic display plate for my Solar Powered Turntable. I had no idea where to get replacements, and then realized the simplicity of the Geometry meant only one thing… I had to 3D Print a replacement,…
This simple tactile map was created by request to assist with orientation and mobility lessons for blind travelers. The map shows a 4-way stop. Each side of the street has a left turn lane and two directions of traffic. Sidewalks border…
I designed a very funning lucky turntable. Assembly is simple and turntable can be customized by slice software. Hope you like it , have fun. Assembly instruction is shown in pictures. Model assembly requires a rubber band. It is…
E3D Revo Micro mount for Ultimaker Original - Return Of The Kraken Hardware required: 1. Up to 4x Revo Micro hotends (more than 2x will require board upgrade or additional MCU like RAMPS if using Klipper firmware) 2. Same ammount of…
Basic Book Prop - Pages Turning
This is a 3D scanning turntable extender made for 125mm turntables, such as the Revopoint mini turntable. It slides snugly over the 125mm table and has 49 randomly placed marker recesses (plus one in the center that wasn't randomly…
It looks a lil messy but it works just fine (╯°□°)╯︵ ┻━┻
Replacement recoil spring guide for Army Armament R604 Hi-Capa
velká akupunkturní podložka tisk: pet-g 0.15mm
Simple friction-fit attachment point which replaces the stock Nexus Pro barrel attachment. Allows darts to fly through it as normal when shells are not loaded as to not compromise functionality. The design process has been optimized to…
A have an old guitar and the turning peg was damaged. There is no any option to buy it, so I did it
Large RC-car with Head Lights & Hazard Lights This is a fully functional RC-car based on an ESP32-S3 microcontroller and a drill machine battery. The car is wide and very stable across many different terrain types. I have designed this RC…
cool saturn that is really fun to spin. made on tinkercad. sorry i do not have good photos
Remixed this two designs to fit my necessities, I wanted to be able to attach the 200RC FPV watch screen to my Turnigy Evolution. Remezclando estos dos diseños para satisfacer mis necesidades, quería poder acoplar la pantalla del reloj…
An improvement to the turning base v1 made before. It includes extra space for components and herringbone gear system
The Diamond Dogs Kar98 + Small Lee Threaded Barrel Breech Turnaround is a modified turnaround for the Diamond Dogs bolt-action short dart spring-powered blasters of the same name. Featuring a larger barrel hole to accept OOD custom M16 x…
Print with 80% infill, and use a 7mm brim. Lay the rod down on the build plate. You also need supports for the under side of the rod; normal supports were used. Lastly, I would use petg or abs/asa for the material. If you have questions…
