Simple handle for resin printers with a flat top cover like Elegoo Mars 3, Saturn, Mercury
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple handle, so you can finally lift the cover off with one hand. No more resin fingerprints! Works with tape.
- Ocena
- 4,875 / 5
- Polubienia
- 138
- Pobrania
- 1035
- Wydruki
- 26
- Wyświetlenia
- 4209
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently bought a Mars 3 along with the Mercury Wash&Cure. Both have a cover that requires two hands to lift, which led to countless resin finger prints all over them.
So I designed and printed this simple handle. It was printed in black PLA and matches the black base of the machines pretty well.
It adheres to the covers with double sided tape. Since the cutout for the tape is 0.4mm deep, use tape that is a bit thicker. The one I used was 0.8mm with no compression.
I can also upload the CAD files if anyone wants to change the size of anything :D
Use the Mars_3 file for your Mars 3 and the Mercury file for all flat top printers like the Mars 1-2Pro. Mercury, ie.