33 045 modeli
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Covers for USB type A, USB type B and USB-C Print instructions Set perimeter to 3. The USB-C cover requires thin wall detection to be activated in PrusaSlicer if printing with 0.4 nozzle. 3mm brim is also recommended.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
Wydruk około 5,93 €–7,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Remixed Somnium's back cover to be a flat plate to simplify printing and overhangs. Also uses the screw holes for the circuit board to secure the back cover to prevent any rattling issues. Need to use 4 - M3x12mm screws to secure the back…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed the power outlet dust cover by grumbel , because I want to swap it more often in and out. I use it in the kitchen near the hot plate, where tomato sauce may be splashed or likewise. :) Therefore the cover is a little bit thicker…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Protective cover with lock Update Compatible with USB Security Insert Lock v4 Easy printing Perimeter: 3 without supports
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A beautiful cluster of crystals with space to hold an LED tea light or flameless candle underneath. Turn it on and watch it glow! Prints beautifully with organic supports only on the bottom area where the tealight is held. Or delete the…
Wydruk około 2,17 €–2,66 € nettoWstępna wycena jednego wariantu
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some Inserts for the Prusa lettering on the LCD Cover. I uploaded a test file too, so you can test whether the letters fit inside. If it doesn't fit, play around with the XY compensation. If you like check out my other designs too!
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Standard outlet cover
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Reinforced Version of TruTech's awesome Flipper Zero Case with f4r0kh's Wifi DevBoard Cutout on Top. Bottom fits the Flipper with TPU Cover. Since the holes for fixing the clips were still too thin for me, I reinforced this area a bit…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I want to print for my Mini a front USB dock and a back cover for LCD. I'd like so much the Display Usb Mod by Joe but i don't have an orange PETG filament... only black. Also i'd like so much the design of Displaybox Cover by 4nthonylin…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LCD Cover Display Hyperpixel 4'' MK3S+ RPI 4B CZ Můj vytuněný kryt pro Hyperpixel 4" a RPI 4B s krytem portů, Vyřízněte stěnu šestihranu. Jsou zde jen pro snadnější tisk. Displej S RPI pasuje fakt pěkně :) Snad bude čas i domodelovat…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The question marks are set so the bed side will be showing for a nice finish.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
If you've lost the cover for your Honda, try this one. After a few tries, this model fits perfectly on my bumper. You can print it in the color you like the most. I also added a small central ring to secure a cord in case it comes loose,…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
This is a replacement dry box cover with a threaded hole for PC4-M10 connector (for example, this ) for PRAKI cereal container used in marsgizmo's Filament Bunker V3 (compatible with Prusa 1kg spool). Note that the cover is made to close…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
The power cable of the MK52 heatbed sticks straight of the back of the printer, which is not ideal if you have a narrow desk or would like to install it in an enclosure. This cover redirects the cable to the side leaving lots of space…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have 2 light switches in my room to control one light, and for one of them when its status is changed it makes the light go all strobe-y and broken. So I made this cover to prevent anyone from accidentally using that switch. (I don't…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After my quite old ebook reader fell down it immediately broke. The material of the front cover was that much brittle, that it even broke into thousands of tiny pieces when I tried to remove it. Even tough the device is now out of…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
Hello Our babies are so curious and love to explore the world ... but when they are interested in electrical outlets the risk of electrocution is not far away! So I decided to design this safety outlet plug cover to prevent any risk. The…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
The lamp cover dims and shades the white light of the Ikea UPPLYST cloud lamp. It's designed to snap onto the mounting plate. The LEDs have 1-2cm distance to the cover to prevent it from getting hot. When mounting the lamp to the wall,…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
If you don't want to access your MMU buffer from behind but from above, this is exactly the right thing for you. In this version the buffer has been rotated 90 degrees so that the cassette slot is on the top . This has the great advantage…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Can be easily scaled for other evolution saws Concentrates suction and improves dust collection
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Front cover for flipper zero to avoid scratches on the surface. Consider to edit horizontal expansion in the slicer for better walls.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Use a PC disk drive externally with this cover
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
Cover for Atari 800 XL PARALLEL BUS. Fits perfectly. Made according to the original cover. --- Krytka pro Atari 800 XL. Print instructions =====EN==== Cover for Atari 800 XL PARALLEL BUS. Fits perfectly. Made according to the original…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I simple tool to remove the screws on the tow hitch cover for Model Y Juniper. One side is designed to fit the screw, the other side is to bend of the cover after loosen the screws. Printed with perimeters set to 4.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This is a small clip designed to attach to a charging cable and hold a silicone USB C dust cover while a smartphone charges. Silicone dust covers are a great way of preventing dust from getting into your device's USB port while it is in…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
I created these covers to protect our Nintendo Switch Pro controllers while traveling. I noticed that some controllers had drained batteries upon arrival because the buttons were frequently pressed in the luggage, causing the controllers…
Wydruk około 2,02 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
here are some covers for the most common USB connectors, easy and quick to print, they are ideal for protecting cables and keys from dust, they are equipped with a ring to facilitate their removal and also to be used as a key ring or to…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Created using Fusion 360
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I found this model after buying a K55 and realising that my muscle memory preferred the Esc, Tab, Shift and Ctrl keys to be on the outer edge of the keyboard. The macro keys were getting me killed at work… so it was necessary to put an…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Liked the original creation, but the grip felt weird. Made my own inspired version completely from scratch. Remember to print it out of a dark opaque material or cover the back with some black electrical tape. Some light could pass…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Case for the Sonoff SNZB-02 ZigBee temperature and humidity sensor.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Optimized for less material and shorter print time
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I remixed this for a friend so that it would fit the notch on the 2021 MacBook Pros. Don't print higher than .15 for best results. Going lower is okay but maybe not necessary. Remixed from: https://www.thingiverse.com/thing:3034483
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
This is a remix of the Prusa Mini Displaybox Cover by 4inthonylin to work with the LCD Frame + USB for Prusa Mini created by Frank S I love this LCD frame modification that includes the USB and I wanted to create a backing cover for this…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
This is a dustcover for the battery mounting plate for the Pendix eDrive e-bike system. Print instructions In the 3mf files for both PLA and PETG I added modifiers for the following. 1) first 2mm is printed with 100% infill because this…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was at a small barbecue party and we had an uninvited visit from wasps. Unfortunately, a wasp had enjoyed the beer bottle of one of the guests without him noticing. The result when he put on the beer bottle was accordingly not so great.…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Replacement top cover for Kenwood Chef Major Classic. Beware: The tabs are fragile
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Doorbell cover for Ikea home smart shortcut button. https://www.ikea.com/cz/cs/p/tradfri-rychly-vypinac-bila-40467765/ Print with supports, then carefully remove it. Sliced for two colors (black last 4 layers).
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple, fast and easy to print dust cover for the Pine64 Pinecil soldering iron, covers the DC 5525 jack and USB-C port.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Opravný díl ke karavanu euro mobil tištěno s MMU a materiál doporučuji ASA nebo ABS
Wydruk około 4,00 €–4,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are three versions 2x3 cm 3x3 cm 3x5 cm the photos are currently with red filament because the white is still being delivered
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Straightforward cover for the EBB36 Gen2, which has a different shape than the classic EBB36 and thus requires a new case. Flip onto the top and print, add supports on print bed only
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
My phone really needed to look like it has proper connectors. Works for USB-C, probably for micro and lightning as well. The plug-insert (needed twice) is probably a very snug fit, so I suggest to sand that to fit properly.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
After I installed the fantastic MMU2 Underslung control panel mount by universaljoint mod, I noticed my MMU was looking a little bare. So, I made this new model to: Provide screw retention (just like pvillano's mod ) Offer a bit of vanity…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
I was facing a big issue with Raspberry Pi-4 heating while printing PETG or ABS because all other available designs integrated with main LCD are close to the bed, so I decided to design this one piece ventilated design with dual fan, four…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original pins seem to get deformed quite fast (and get loose) as you can see in the first picture so I made a replacement. Printed with PETG they which will hopefully last longer. Original Einhell part number is 341313101058 Printed…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used the stl model “z-screw-cover.stl” (Z-Axis) from @Prusa3D. I Scaled down the original cone 99.5%. The rest of the cone has been turned into a cylinder. Reason for Creation The scaling strengthens the parts hold on the acme screw to…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intel NUC Cover Plate MMU by Keks95 on Thingiverse: https://www.thingiverse.com/thing:6595145
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
Protect your screen and reduce light pollution. This cover is 79.80mm by 30.30mm to fit the (as of writing) current MK3S+ design . Fun facts: Be sure to check out “LCD brightness adjustment” if you're concerned about light I had been…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: I sent the piece of junk back to Amazon. Wifi connects really easy but the rest was a nightmare. One printer wont read the fake SD card but will home the printer, the other printer, did read the SD and would start the print, tilt…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes with holes for cables. You need two 8 x 4 magnets. It looks like this on the left side: It is designed to use with my magnetic cable duct (see…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Research by Josef Prusa phone cover for the OnePlus 3. Print instructions Print with logo side up! The cover is slightly bent so can't be placed flat. It's also recommended to set the infill to 100% for extra strength. The test…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
I bought a Shimano Deore shifter (SL-M591) with an indicator display which I don't want. I still need something to prevent dirt & water ingress, so I made this. I removed the display, & while it has the tabs for holding the spare cover,…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Simple cover based on black PLA. No support needed
Wydruk około 3,48 €–4,26 € nettoWstępna wycena jednego wariantu
This is a display cover with a clear window, to almost see, what happens on the LCD. Main functions: dirt protection LCD look through This is my first model and since i don't have the 3D file of the display, i tried to generate a cover…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple, fun, and functional camera cover can be used on all indoor ring cameras! Instead of having to unplug or turn the camera away when you need a little privacy, just rotate the top hat and that's it. This should be printed with a…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
I wanted the Basic Board cover to match the cover of the LCD panel, so I made a remix without the hexagon imprints on the top. Printed with Prusament Orange PETG. The printer settings are the same as the original: 0.30mm DRAFT PETG 15%…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This may look like a decorative print created for aesthetics, but it has more of a functional purpose, but with one caveat. Philips Hue Motion Sensor is not only a convenience device, but also a security device. The security functionality…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
The cover will protect the studs from rusting. You will have to use raft, because the walls are thin (1 mm). The holes purpose is for removing the cover off the studs. If you have any question, feel free to ask me. :D
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Covers Side-Box and Side-Kick-Box option. https://www.prusaprinters.org/prints/122767-sidebox-sidekick https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right
Wydruk około 4,35 €–5,32 € nettoWstępna wycena jednego wariantu
This Light Switch Cover prevents someone from accidentally shutting off the light switch without covering the sensor. I have installed these light switches in the bathrooms (and several other rooms) of my home to help with younger…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Battery cover for Sharp EL-5812 calculator - the calculator was made in the 1970s and still works reliably during everyday use. Over the years, however, it has lost the battery cover and the new one has received today thanks to Prusa…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've an unreasonable fear of the garbage disposal. This hinged cover prevents accidental switch presses. Designed for Leviton screw-less plates, but you can adapt it for other brands using the attached Fusion360 source file. Print in…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Robitornic Powerswitch Holder and Cover for the Reciver Box The Switch https://shop.robitronic.com/de/robitronic-elektronischer-schalter-r01612 the cover closes the hole from the manual switch the holder / cover fits on the buggy and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The remote holder is an one part print but you need a little for installation and to use the slider: Slider handle: any rods with 5mm diameter: M5 machine screw , wood-or aluminum- pin, printed pin, etc. Magnet mount: 2pcs. neodymium…
Wydruk około 8,85 €–10,82 € nettoWstępna wycena jednego wariantu
It prevents the fork and the portafilter from scratches. It simply klicks in place, sometimes a bit firm, so it can‘t fall off. Suggest to print in PETG, so it wouldn‘t deform with your preheated portafilter. It‘s also printable in TPU to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of LCD cover (for MK3S+) to fit to Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without ) - it is done…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an alternative button cover for the HDMIPI. You can find more info on HDMIPI at http://hdmipi.com/ The Bridges are now thicker in V1.02 Instructions These were sliced with Simplify3D but other slicers should be fine. I recommend…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Material ABS UV and heat resistance for outdoor use. Layer Height 0.2 mm Good balance between print speed and surface finish. Infill 20% Provides structural integrity without wasting filament. Wall Count 3-4 (Suggested) For outdoor parts,…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
11/8/24 - v2 Update Increased the size of the ball & socket on the hinge for a stronger more reliable hinge Modified the design of the snap fit latch to be more secure Fixed a few issues in the Fusion360 sketch where I wasn't properly…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanting to place a dummy load inside the enclosure, I encountered a problem with routing the temperature measurement socket to the front panel. I decided to keep the original JST connector of the temperature sensor, and install a JST…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Everyone knows blue LEDs are the bane of our existance for anyone whose work computer lives in their bedroom, so this print is a simple LED cover that covers up the obnoxious (and frankly redundant) blue LEDs on the front of this…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
After printing the hydroponics tower and adapting it to live on a 2 gallon bucket, I needed a way to pass the power cord for the pump that lives in the bucket through the lid without a gaping light leak that would encourage algae. 25x20…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not sure the model of light fixture I have but the old clips break easily and were hard to find. Hope this solves a problem for someone.
Wydruk około 9,13 €–11,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The insulation cover of the hot water boiler slides all the time almost touching the floor tiles. I had to make these supports to get rid of the problem. The diameter of the cylinder is 670mm, now the insulation cover is at the required…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
If you are like me, I worry about carrying fully charged lithium ion tool batteries in tool bags. While the battery connectors are recessed to prevent accidental shorts, I tend to be a bit paranoid with all of the things that…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Simple cabel cover with standard screw
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Slicer: Cura Material: PETG (CRON) 🔧 Nozzle & Layer - Nozzle Diameter: 0.4 mm - Layer Height: 0.16 mm - Initial Layer Height: 0.16 mm 🌡 Temperatures - Nozzle Temperature: 235 °C - Bed Temperature: 80 °C 🚀 Speeds - Print Speed: 32.5 mm/s -…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
![[revised] BottleCaps v2 - Insect cover for bottles](https://media.printables.com/media/prints/215863/images/1971380_6c21485d-bdac-4b84-8426-25d9f5b8de3b/bottlecaps.png)
