RJ-45 Network Jack Dust Cover Plug CCD Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. CCD Version
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 150
- Wydruki
- 9
- Wyświetlenia
- 1056
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
RJ-45 Network Jack Dust Cover Plug
Wanted a good one, ended up designing my own.
I wanted something that emulates a RJ-45 plug and stays in place.
Sample blue parts printed in Polymaker PRO PLA.
Tab actual locks parts in place. Tab also releases dust cap when squeezed.
Nozzle Temp 220 deg C
Plate Temp 60 deg C
Recommended Material : PLA
Nozzle Diameter : 0.4mm
Layer Height : 0.2mm
Support : NO
In-fill Percentage : 25% Gyroid
Vertical Layers : 3
Bottom Layers : 3
Top Layers : 5
This is a Case CAD Designed version. (CCD version).
3 print versions available, single part, 12 part matrix, and 48 part matrix versions.
These parts have successfully tested on the following devices. Will work with 99.9% of RJ-45 ethernet ports out there.
Mikrotik Router / Switch
Motorola CC-HUB
JUNIPER EX-4400 Switch
Juniper EX-4100 Switch
Motorola DSC-8000 Site Controller for K Core.
