289 modeli
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motorola Moto Tag Dummy for reference. Design your Moto Tag cases with this dummy.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Suports needed! Printed on a Prusa Core One My setings were: i used organic supports contact distance :0.1mm interface patern spacing :0.1mm top interface layers :3 I printed in pla ,but abs, pet, petg or asa are ideal but i did not…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Motorola logo intended for two-color printing. Printing without supports, Infill: 10%. Share your printed model.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
Wydruk około 5,67 €–6,93 € nettoWstępna wycena jednego wariantu
I was looking for a nice and easy way to attach my Motorla T82 radio to my paraglider. I tought that the peak design attach was a nice, non-permanent way. You need the original back clip of the t-82, which goes through this adapter. I…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created it with TPU and 0.6mm nozzle. The 0.4mm nozzle may be a better choice. I have also uploaded gcodes for 0.6mm/0.4mm/TPU/PLA for MK3S+. I you are interested in other combinations let me know. You may also create your own…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
We lost one of the knobs on our Motorola T9580 radios. This new one fits very tightly and shouldn't fall off. It mimics the original design fairly closely except it does not have the curved sides like the original. In the image of the two…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
Wydruk około 8,03 €–9,82 € nettoWstępna wycena jednego wariantu
Motorola Battery APX-7000 and APX-8000 Laser Marking JIG This Jig is used to laser mark batteries for identification and ownership. Caution should be used when Laser marking any surface, especially battery cases. I am using a SainSmart…
Wydruk około 4,22 €–5,16 € nettoWstępna wycena jednego wariantu
Motorola CC HUB Bracket and Dead Stop. Having new Motorola Dispatch consoles installed at work. Need a way to secure them on the desk without them being pushed thru the back by an overzealous dispatcher. For my application I made them…
Wydruk około 3,39 €–4,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mikrofonhalter für Motorola Funkgerät Feuerwehr 0,2 Layer Wall 4-5 45% Infill 4 Untere und obere Schale
commercial use This model is not released for commercial use. If you want to sell products related to this model, commercial licenses are available via direct message. description a printed case with a integrated belt clip for a motorola…
Hey! Here is a 3D model for the “Moto Edge 40 Neo” cellphone case. You can find a flat model on DWG and STL so you can modified the file and as example you can find a Tesla Case. Printed on TPU, 0.1mm layer height , 40% infill, supports…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
A TPU Case for the Motorola Edge 50 Neo with full camera lens protection. Because of the camera bump, the model is divided into two parts which you have to glue together. I tried a number of glues, this one worked very well on TPU: Pattex…
Perfect fitting Smartphone cover for Motorola G54. Print in TPU or similar. Like to see your makes, post it here .. Love my 3D models? If my designs have helped you print something awesome or inspired your next project, consider…
Replacement knobs for Motorola 2-way radio. Modeled after XPR 6350 but will likely fit multiple models. Blender file included. Category: Replacement Parts
Couldn't find a nice fitting case, so I made one in free cad. Printed in Jessies neon yellow petg, 15%infill, supports everywhere. Hope you enjoy the case, and if there's any dimensions you would recommend changing just let me know and I…
The modular version of the mount features a clever dovetail design that allows multiple units to be joined together seamlessly. This modular aspect offers flexibility, enabling you to create a custom arrangement of multiple walkie-talkie…
ohne support drucken mein druck ist aus Pla kompatible mit Motorola Moto Tag den Tag mit etwas druck in die obere hälfte (side-a) drücken Schließmechanismus zu drehen, fertig Vielen Dank an Jonan Seeley , der das Original Modell für den…
1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…
Our fire service has recently been issued with Motorola APX6000 portable radios. Unfortunately they weren't supplied with any sort of mount to secure them in our fire trucks. This design consists of a cavity shaped to accept the radio and…
You may need to play with the scale slightly to get the proper friction fit on the encoder shaft. Over time I've noticed mine has gotten a little more loose.
A knob for radiotelephone Motorola GP 360
Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…
Hi! this is my first design after a few weeks of practice, i hope you enjoy it. Waiting for those makes!
Originally published here: Motorola Moto G60 & G60s xt2133 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models' materials are not interchangeable , so pay attention…
i updated the design so now the bottom right corner is more protected.
TPU .2mm layer height No supports needed
Phone case for Moto g53 (2022). Was printed using PLA+ (didn't have any TPU at the time). If you choose to print in TPU just make sure to reduce the scaling in the slicer (doing this might require some trial and error). This is to ‘get…
Eine angepasste Mikrofonhalterung (auch "Mauserl" genannt) für das Motorola MTP3550. Die Anpassungen habe ich rein im Bambu Studio vorgenommen, also nicht wundern, wenn die STL Dateien nicht hundertprozentig genau geschnitten und…
I designed the case to be printed in TPU, so to use PLA I recommend making some changes to the mesh for greater flexibility.
I used high speed tpu from overture but regular tpu works fine for the magnets the model is made to use 60x10x3 mm magnets but feel free to edit the model. And if you want a harder case increase the infill or if you want a squishy phone…
Passiv Halter für ein TETRA HRT Funkgerät Marke Motorola Typ MXP600 2 Varianten für Akkus mit 2900 mAh & 1900 mAh Gedruckt mit 30% Infill und Stützen im Bereich des Ausschnittes für den Halter.
Cover for smartphone Motorola edge 30 neo. TPU
Motorola TPG 2200 Case with a place for adding a metal clip (https://www.amazon.de/dp/B07KLJK62B) with a M4x5mm Screw Hexagon Socket and a M4 Nut. UPDATE V2: The back for clip is now open on the bottom.
Case for Motorola Edge 50 fusion.
Originally published here: (WIP) Motorola Moto E20 xt2155 case by tato_713 - Thingiverse This was designed for the Motorola E20, but it may be compatible with the E40 as well. Some of the models are designed for rigid materials and others…
Originally published here: Motorola Edge 20 xt2143 case by tato_713 - Thingiverse This case is for the regular Edge 20 model, for the Edge 20 Lite/Fusion see this . Thanks to KonstiSFX who helped me testing this case. Some of the models…
Simple desk stand for the Motorola TPG2200 Pager. Easy and Fast to print PLA 0.2mm
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…
A hardshell phone case made for the moto g84. Print with PETG, 100% infill. I used the default 0.2 mm STRUCTURAL printing profile in prusa slicer printed on my MK4S. Make sure to print both the case back and the camera guard. Supports are…
Originally published here: (WIP) Motorola Moto E7 & E7i Power xt2052 case by tato_713 - Thingiverse This case was designed for the phone E7, E7 Power and E7i Power. It could be compatible too with the E7 Plus, but this one has a slightly…
I really liked the thin OEM ThinkPhone case, but the plastic fatiqued and cracked quickly. I cloned it as well as reasonably possible and have tested it printed in Polyjet and FDM, both with success. The FDM prints tend to delaminate a…
Originally published here: (WIP) Motorola Moto G9 Plus xt2087 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
Easy-to-Print Case for Motorola Moto G05 This case is available in two geometrically identical variants , each with a different back design: Hole – a simple opening for the Motorola logo Image – a decorative alternative, more complex to…
Holder for Motorola communications radio. This holder will support radios or batteries with or without the belt clip. I have added a shallower holder for a single radio. Category: Tool Holders & Boxes
Originally published here: Motorola Edge 20 Pro / S Pro xt2153 case by tato_713 - Thingiverse This case is for the Motorola Edge 20 Pro , for the regular Egde 20 see this case ; and for the Edge 20 Lite see this case . Thanks to Marcus…
it is only a motorola E13 case, it was used kingroon TPU filament, 220C nozzle and 70C bed temperature
Originally published here: (WIP) Motorola Moto G20 xt2128 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. . For different reasons, I have trouble to test some of the phone cases I have…
This is a dual XTL radio mount. See my other models for the single radio mount.
Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch. You can configure the shelly as an sensor so you can switch on smart devices when the integratet relais. You need the…
If this model meets your highest expectations consider to donate . It took around 20 hours of work to perfect and make all the variants. Important: print settings Disclaimer, this is a really hard print (steep overhangs with flexible…
This is a simple desktop stand designed specifically for the Motorola MOTOTRBO R7 and DP4800 handheld ham radio. (It might fit more radios from this product line.) The stand holds the device at a 12° backward tilt to improve visibility of…
Some time ago I broke my belt clip for my T60. As I didn't like original design too much I decided to make my own. Here it is, simple and effective. It's not some super attractive design but for first version it will do. Belt clip…
got some second hand walkies and the talk key was missing so i made a new one with some tpu
This part is almost identical to the original. It fits perfectly, but it’s a tight fit, which guarantees it won’t come loose. The knob was printed in PET-G, though I also tested PLA (it works the same). It was printed in the normal…
Printed using Black MG95 ABS Layers 0.2mm Walls 2 Top/Bottom 5 Infill 15% Gyroid Bed Adhesion Brim (3mm or 5mm) Supports Yes (Touching Bed only) PS: You need to add a “support blocker block”. Resize and move it to cover everything above…
A small knob guard designed for handheld Motorola VHF radios / DMRs, probably fits multiple different models. Prevents the channel knob from unintentionally moving and changing channel by mistake, which sometimes happens too easily when…
A remix of a Motorola Advisor TPG2200 Homestation designed to house a D1 Mini microcontroller for esphome compatibility for homeassistant . This allows you to craft all sorts of smart home automations via homeassistant when you get an…
This slip-on smartphone case/cover is designed to fit the Motorola Moto E and has a waterfall hearts accent. It is recommended that TPU98A be used to print the case because it offers stiffness and yet enough flexibility to easily slip…
This is a mount for a Motorola XTL radio, the image is of the dual radio mount.
Originally published here: Motorola Moto G51 xt2171 case by tato_713 - Thingiverse Thanks to Angel Alonso who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models…
intended to print the base with PETG then change to TPU, and print the buttons separated in tpu with the top that you touch on PETG
This Skadis mount is made for 3 Motorola Talkabout T42 walkie talkies. You can store the radios with the belt clips attached or you can take the clips off and store it in the mount. Pegs need support.
This is a desk stand for the Motorola XPR7550 and XPR7550E radios. Print Settings Printer: Monoprice Select Mini V2 Rafts: Yes **Supports:** Doesn't Matter Infill: 20% Category: Electronics
A simple KlickFast stud to fit Motorola T92 H2O handheld PMR radios. Fit confirmed with official Peter Jones KlickFast docks. Print settings Orientation: 90º rotation (as screenshot) Material: PETG/ASA (for strength) Nozzle size: 0.6mm…
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
The volume knob on my pager kept getting turned down, this shield for the knobs helps prevent that. Prints flat and attaches with a drop of super glue. First one printed in pla lasted about a year of wearing every day until it cracked,…
Scan of the Motorola DP4800 military radio station. Remix of the 3D scan from https://sketchfab.com/3d-models/motorola-dp4800-103240c7581e40d2b9ebcb469c3218e5 Original model converted to the solid body in Meshmixer with two resulted STLs:…
This model guards the knobs on a Motorola XPR 3500e so the volume and channel aren't accidentally changed. I finally got fed up with the volume and channel settings of the radio being changed by rubbing against my clothes as I walked…
The APX6000 is a radio commonly adopted in enterprise solutions and by emergency service organisations. It's useful to clip the radio to your belt and operate the radio via a wired microphone. We never seem to have enough belt clips for…
The classic Motorola Dynatac 8000x With pushable buttons. For assembly use glue. Don't glue in the buttons. ;)
Originally published here: Motorola One Vision / P50 xt1970 case by tato_713 - Thingiverse This is the case for the Motorola One Vision ; for the regular Motorola One visit this . Some of the models are designed for rigid materials and…
This is designed around the Motorola T260 Talkabout . This is probably mostly useless without downloading the scad file and adding some mount mechanism, but here is the basic shape at least. In my case I wanted to mount the walkie-talkie…
wore rugged version of this case for a month, liked it, so i decided to make my own version :) .3mf file contains settings for honeycomb print, I added my logo and picture and printed with Prusa XL flawlessly dual color :)
I suggest using the Pointed or Solid Tip versions for best performance. The included Classic version features the same flat contact area of the original (essentially it is the original version, but with my added tactile lines.) I changed…
Clip ceinture pour talkie walkie motorola T80 extreme Clip renforcé pour une meilleure solidité A imprimé de coté avec support
Motorola talkabout T92 H2O belt clip. Just replace the original black hanger with the belt clip.
I printed this in TPU. The power button still needs to be moved down 5mm or so. I believe I just printed it 100% infill or just kept adding perimeters until there was no infill. Layer height .3mm or as high as your nozzle will allow for…
Originally published here: (WIP) Motorola Edge 20 Lite xt2139 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. This case was designed for the Samsung S20+, including the 4G and 5G versions,…
I didn't see any phone cases out there, so I took a shot at it. This is a very simple and generic phone case for a Motorola style smart phone. I hope someone else can enjoy this too.
Originally published here: Motorola Moto X4 xt1900 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the…
Cover for the channel and volume knob to prevent accidental channel or volume changes in the field. This should be printed in TPU or other flex material because the volume knob has an undercut to ensure the cover does not come off…
obal na mobila s desingem i am groot zapuštěný nápis je potřeba vymněnit filament za risku
Dual cage for Motorola XTL5000. This has all the rear cutouts and both units slide in with ease and has a secure fit.
Simple case for Motorola E7 Plus made to be printed in TPU filament. Filament : TPU (Mandatory!!!) Layer Height : 0.1mm Can be anywhere from 0.5 to 0.25 depending on your printer, filament, and other variables. Speed : 30-50 mm/s…
Case for moto G84 made to be printed with TPU. Print at 100% infill. I used the default 0.2 mm STRUCTURAL printing profile in prusa slicer printed on my MK4S. Print "case-tpu.stl" with TPU and "case-camera.stl" with PLA or PETG (havent…
I bought Motorola Radius GM 1200 with all necessary accesories except speaker holder. So I designed 3D print holder for home use. Model printed from PLA with 30% is sufficiently rigid. No supports needed. 73 and have fun with radio!
Originally published here: Motorola Edge xt2063 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will probably fit…
Lochdurchmesser: 4,5 mm (für Montage)
I didn't find any free case models for my phone so I made my own. It doesn't wobble on a table and I've included a solid and hollow back option. Its not perfect but its fits well and feels decent in the hand. Model has some rounding off…
Originally published here: Moto 360 watch strap and protector by tato_713 - Thingiverse This has to be printed with elastic filament like TPU. I've tested and it does not affect the optical heart rate monitor nor the wireless charging.…
Simple wall mount shelf for a Motorola MB8611 cable modem. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: any PLA any Category: Organization
