Motorola APX 7000 Knob Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the channel and volume knob to prevent accidental channel or volume changes in the field
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Cover for the channel and volume knob to prevent accidental channel or volume changes in the field.
This should be printed in TPU or other flex material because the volume knob has an undercut to ensure the cover does not come off accidentally. The antenna loop has a slight ridge to hold it in place, which also requires slight flex in the material to slip over the top.
Cover lids have a 0.2mm overhang support built in to eliminate the need for supports. This may require you to use a 0.4mm nozzle with a 0.2mm layer height for proper printing.
This version is printed in orange generic TPU with 25% infill, which ensures a tight fit, but it is not difficult to apply or remove.
There are smooth round-overs in the arms to support elastic bands for a radio holster.
As printed:
TPU/FLEX
0.4mm nozzle
0.2mm layer height
25% infill
No supports
PEI Textured Sheet