1 / 6
Motorola Advisor TPG2200 Smart-Home-Pager-Stand — zdjęcie 1
1 / 6

Motorola Advisor TPG2200 Smart-Home-Pager-Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch.…

Ocena
0 / 5
Polubienia
8
Pobrania
147
Wydruki
0
Wyświetlenia
2435
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch. You can configure the shelly as an sensor so you can switch on smart devices when the integratet relais.

  • You need the following parts extra:

2 x DC Power Jack-Sockets (5,5 x 2,1mm)

(https://www.amazon.de/gp/product/B089DXQDS9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

1 x Shelly 1

1 x 12v power adapter with DC-Power-Jack (5,5 x 2,1mm)

1 x DC-Power-Jack (5,5 x 2,1mm) with or without cables

2 x WAGO 221-413

  1. circuit diagram:

    • connect plus from input-dc-socket with one junction box clamp
    • connect plus from junction box clamp with the shelly (N(+))
    • connect minus from input-dc-socket with the other junction box clamp
    • connect minus from junction box clamp with the shelly (L(-))
    • connect minus from junction box clamp with the second dc-socket
    • connect the return signal from second dc-socket with the shelly (SW)
  2. shelly/smarthome configuration:

In Shelly-app:

* timer:
+ auto off: I have configured it with 180s (thats enough for me to leave the house. you could configure it in different ways. but this were the easiest way for me)
* settings:
+ eco mode: active
+ power on default: SWITCH
+ Button Type: Activation SwitchIn Google Assistant
  • add the shelly device to the assistant. follow the instructions in the app
  • then you need to set up two new scenes for you home (not personal)
  • turn on: set the shelly as a trigger. when shelly switches on -> configure you devices / lights to turn on
  • turn off: set the shelly as a trigger. when shelly switches off -> configure you devices / lights to turn off

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 S1

Supports:

Yes

Infill:

15

Filament: eSUN ePLA Black

Category: Other

Tagi