1 / 5
Motorola TalkAbout SX700 Walkie Talkie Antenna Replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Rubber antenna becomes brittle and crumbles, so I modeled this replacement, you can just print and replace it.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed using Black MG95 ABS
| Layers | 0.2mm |
| Walls | 2 |
| Top/Bottom | 5 |
| Infill | 15% Gyroid |
| Bed Adhesion | Brim (3mm or 5mm) |
| Supports | Yes (Touching Bed only) |
PS: You need to add a “support blocker block”. Resize and move it to cover everything above 7mm so you don't have to clean up supports in the inside.
In case you forget to block supports, you can use a drill bit to clean up supports inside.