Liczymy pasujące modele…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
The FrSky XM+ receiver has very fragile antennas that often get damaged if you don't handle them carefully. To fix this, I designed this case to hold the antenna wires in place and provide a good surface for gluing to the fuselage. I've…
If you have an older Toyota Prius, you might have noticed the rubber collar is cracking or completely falling off and exposing the spring underneath on your antenna mount. That isn't a problem in itself except that the spring isn't strong…
This is a TV antenna to be placed on my printed model houses. The model is best printed with a 0.25mm nozzle and 0.15mm layers. Happy printing.
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
2 versions de suport antenne pour JeNo 5". Une version pour les antennes SMA et une version classique. Les deux versions s'impriment debout avec juste un petit tree support sous la partie deversante horizontale à l'arrière.
This model holds the VTX antenna for the Xhover Gapit frame, i also designed this part to have a zip tie that retains the main power cable, I recomend printing this out of TPU or Nylon (This part was printed in CF Nylon ONYX)
Update (2025/02/01) : Minor edits to lid, specifically made the screen hole smaller and extruded a hollow box to prevent items from ingressing via the screen hole. Parts needed : 1xLid. 1xBase. 2xButtons. 4xM3x10 screws. Depending on your…
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
The Immortal T placement is not optimal if it's the only antenna you have on the quad, I use it because I use a diversity receiver with 2 antennas. This mount works well if you have U.FL to SMA adapters to attach your antennas for the air…
This is a remix from @HandsOnKatie_827995 prints ( thanks ! ) Adapted for vertical corrugated sheet wall.
For Avatar HD Pro dual antenna, mount perfect for ERA Frame For 25mm Standoffs (middle to middle) I printed this in TPU, also PETG, PLA,……
The elements allow you to attach guy lines to a light antenna mast. The ability to rotate the mast has been retained. The model is adapted to a foldable "flag" mast with a diameter of 51 mm. I printed with Pet G, 25% infill. Elementy…
Remix of the backpack for my two antennas, space for wires underneath and antennas up top.
In an effort to improve the signal quality to my Soliom BF08, I designed this bracket to relocate the antenna to the side of the feeder. The result is a huge increase in signal, since there’s no longer a sizable metal box interfering…
Protect your Yarbo RTK-antenna with this model. Designed to cover the base under the antenna for as much support as possible. Angeled in the bottom to follow the Yarbo body. Big “wings” in the front and back, to make sticks and branches…
Die Halterung eignet sich perfekt zur Montage der Segway Navimow Antenne an einer Wand. --- The bracket is perfect for mounting the Segway Navimow antenna on a wall.
PETG recommended but PLA should be fine for smaller antennas. Very tight fit.
Protect your hallow antenna from sticks and debries. Hopefully this will protect your hallow antenna a little more than without it. Same style as the RTK antenna covers i made. Print in PETG or other filament that can withstand outdoor use.
These are enclosures for a 49:1 UNUN for end fed half wave antennas, a 9:1 UNUN for random length end fed wires, and a common mode choke. They are sized for T82-43 toroids. Each enclosure also includes an optional gasket that can be…
This is a high-precision 3D model replacement for the original Cybiko Classic antenna's plastic cover. Designed for restoration or custom projects where the original antenna tip is missing or damaged. 📡 Features: Optimized fit for the…
Mount for an SMA Antenna on the back of a Mario 5 frame
Mount for the RadioMaster RP3 antennas on a Mario 5 frame, print in TPU
This is a remix of the original AX1 antenna clamp bracket as well as a generic molle mount. I took only the l bracket from the clamp mount and put it into blender and paired it with the generic molle mount so now you can have a man pack…
Add a touch of fun and personality to your Ninebot helmet with these 3D-printed "bug" antennas! Designed for flexibility and durability, these antennas are printed in PETG filament and easily attach to the top of your helmet. Whether…
Frame X Dji 04 Pro Air unit Dual Antenna Mount And XT60
Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
I needed a case to use my XIAO ESP32 as a ESPHome Bluetooth proxy. You will need a 2"/5cm UFL to SMA cable and an antenna. Make sure that supports are completely removed around the seals - some bits tend to stick which will prevent the…
Print the side with the wifi icon facing the plate With this "upgrade," my printer no longer loses Wi-Fi. I can't say how much the actual gain is, but I went from struggling to connect to having it already connected as soon as I turned it…
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
Heltec v3 case for 8000 mhA battery + on/off button + 2 part parametric antenna mast with insert & cover Designed to test different locations & antennas for a few days
A unique antenna clip for the legendary Suzuki Katana Samurai. If you use the 3MF files, the parts are already positioned diagonally for maximum strength along the axis where the forces are applied. If you prefer the STEP files, I…
Best use for printing is PETG as it gives stronger support for the antenna if you are out doing some radio activity on the VHF band. Print x4 for the arms and go to DL2MAN for the supports and all credit to him for his model making in…
This support is perhaps the easiest of all to print, assemble and use. This is already the permitted model, which does not cover a large area of the windshield. With just 3 printing parts, 2 M4x30 screws with self-locking nut and 2 simple…
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
I love having a small deployable antenna on the uConsole, but as the original mount was secured by only one screw, the whole thing pivots easily when articulating the antenna. Additionally, the wire stand has no place to rest and hangs in…
Heavy duty FPV cam, VTX and antenna case V2 for rc plane or anything rc. Room for 1s lipo batery. I used a RunCam Phoenix 2, and AKK long range mini vtx.
xt30 and antenna holder one is inline and the other is set side to side. Have thinner lighter versions as well.
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
This is a press fit mount for a bingfu gps antenna. The specific antenna: https://www.amazon.co.uk/dp/B07R7RC96G?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Created to mount on a corner wall and still provide good gps coverage.
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
This replacement back plate for the Aoostar Wtrt Pro takes on the 120 mm fan and two wifi antennas.
I modified the bottom to attach the antenna. See Original model to get the case top. No supports. Original Case Designer: Robert ATS Duct @RobertATSDuct_791555
this in the internal antenna mount for the Spektrum DX6i , Happy Printing
Elevate your LoRa gateway or Meshtastic node with this custom-designed pole mount. Specifically engineered for fiberglass omnidirectional antennas (like those used with RakWireless, Helium, or MeshCore kits), this mount provides a secure…
A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. I use it for making Meshtastic antennas, one of them can be seen installed on a solar node. Easy to use: Print in PETG, completely solid, wide…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
This model is a 3D printable frame designed specifically for a 900 MHz biquad antenna . It provides accurate geometry and stable mechanical support for the antenna elements, ensuring consistent spacing and alignment, which is critical for…
I do ham radio. An HF wire dipole or EFHW antenna needs to be wound up onto a spool of some sort when not in use. I do 3d printing. I have lots of spools lying around. Perfect for winding up antennas! The exact spool is:…
This model is a 3D printable frame designed specifically for a 1800 MHz biquad antenna . It provides accurate geometry and stable mechanical support for the antenna elements, ensuring consistent spacing and alignment, which is critical…
This enclosure was designed to hold a toroidal balun or transformer for matching to a transmitting antenna. It was designed around the 61mm cores. There are two versions - one with SO-239 connectors on each end, and one with an SO-239 and…
Simple antenna protector for the FrSky Taranis X9D Plus, useful when transporting the transmitter in a backpack.
simply collar to hold a zip tie-antenna. print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert…
Cover for Triple Feed Patch Antenna. Adapted for Skyzone fpv goggles mounts. Requires 3 M3 threaded inserts. Original SMA cable must be replaced with a longer one + 1x SMA 90° (it is also possible to use 2x SMA 90° reduction, then the…
Groundplane antenna with so239+sma adapter support for my home shutters, tested on 8mm metal and plastic shutters fit stiff and secure. 20% infill is enough flexible to be adapted to different type of shutters. Can be used outside or…
The biggest issue of M-VAVE Chocolate (Plus) is its internal BT antenna is basically fully shielded by metal case of whole controller making bluetooth connection incredibly unreliable even for short range. The mod disconnects onboard…
After going through the surgery of opening my G5AR and attaching the tiny IPX connectors to provide external antenna access, I was a little worried about a mishap where an antenna cable got pulled with sufficient force to disconnect them…
Printed from PETG, 4 walls and 100% infill because of transparency from choosen material. After printing just unscrew the battery holder, with flat head carefully unclip the original and xlip on the modified version.
Building the Joshua Bardwell QAV S2 3" and the DJI O4 Lite antenna is known to be too short. This mount makes it work
This add-on is designed as a practical handle extension for the Draussenfuchs Yagi Antenna Holder and allows you to securely attach your handheld radio directly to the antenna setup. With this handle, the radio can be plugged into the…
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
Simple winding tool to help make antenna coils that go into the frames here on Thingiverse Good for <= 2mm dia. wire (Should use solid copper for best performance!) This is a good write-up about these antennas, use right-hand coils for…
Remix of Tokyo Dom's antenna mount, modified to fit the TrueRC Singularity Lite 2mm antenna cable (coax with heatshrink) and a small zip tie. Printed in TPU.
This a variation of my other Harbor Breeze pole mount , but this one uses magnets. You'll need to purchase these 1/4"-20 screw-in magnets as well as some 1/4" heat-set inserts if you don't have any (they come in handy). I recommend…
I needed a way to mount my Harbor Breeze Solar node to the exterior of my apartment as high as possible without drilling into the brick. I decided to make this mount that hooks onto the top of the window. I have also added a small command…
I also pushed the modifications for OPENWRT to run on Raspberry Pi 5 to GitHub. Quick heads up - I didn't have the STEP file when I started, so I used the STL with Render to make these changes. Realized way too late I could've used the…
Stand for the WiFi/Bluetooth antenna of the ASUS X570-E Gaming motherboard. The original stand is very unstable, so I redesigned it. Printed with 0.08 mm layer height for a better finish.
This case is designed for the NodeMCU ESP32 S Dev Kit with dimensions of 54 × 25 × 15 mm . It features a built-in PCB support strip to securely hold the board without additional tools, precise cutouts for the USB port and SMA antenna…
This 3D-printable antenna hub and accessory set lets you build a cost-effective, portable quarter-wave ground plane antenna ideal for airband listening. The central hub houses a BNC connector and supports the monopole and radial elements,…
M4 - 5mm screws needed for the extra 1mm thickness a 1mm spacer to add an antenna 'block' at the top, bringing the original antenna away from the metal body for better signal keeps the uConsole looking close to stock. the antenna 'block'…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
This is a small riser/mast for a small antenna that uses an bulkhead N-Type connector. I figured getting the antenna above the solar panel for the Meshtastic Seeed Studio Solar Node would improve its performance. The riser is 105mm tall…
A vintage side antenna for my Beetle models. I did not plan this originally. Therefore, you must drill two 1 mm diamater holes wt 20 mm distance.
With field day coming in a couple of days, I needed some wire insulators for dipoles that would be strung up at the field day site. I didn't have time to wait for them to be delivered, or to make the trip to the almost-local emporium.…
Self-retaining breadboard antenna with dual mount for two antennas for prototyping. Fits any standard breadboard. Strong hold that nothing can come loose accidentally. Have fun prototyping!
The assembly is simple. The bottom part has a hole at the bottom for the support rod. The coaxial cable can pass inside the hollow rod, or there is a side hole to route the cable outside. The middle part holds the radial wires. The outer…
I designed this to provide a little more water protection on the Wouxun KG-S88G GMRS radio when using a Smiley Antenna. This must be printed in a flexible TPU, I used TPU90, because the press fit around the Smiley antenna is very tight…
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
This antenna mast support bracket is designed for mounting telescoping fiberglass antenna masts to a standard vehicle 2" adjustable drop hitch receiver . The adjustable drop hitch pictured is from Harbor Freight, although this will likely…
This is a vtx antenna mount for the AlfaRC Cub-AIO 2in FPV frame. Works with multiple types of antennas. Printed out of 95A TPU on an ender 3 with very little supports. Feel free to leave any questions or suggestions in the comments.…
Single and double antenna mount for the HGLRC Rekon 5. Should/could fit other frames with 4mm standoffs that are 12mm apart (center to center). Made it to fit a single antenna (DJI O3) as well as the double antennas of the DJI O4. Printed…
I poorly modified a friend's mount made for another quad to fit my Seeker5. Not made to work with stock XT60 setup.
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
I designed this to solve a two problems: Unless I removed the door I was always concerned it would open and break when I was working on the underside electronics compartment because I would need to put the printer on its left side The…
A simple pill-like holder for two Lollypop Stubby antennas. The print consist of a tube with two caps, and each tube is able to hold a Stubby antenna. Due to the nature of the small fasteners, at most 0.12mm layer height is expected for…
Print in an all-elements ready filament like PETG/ASA/ABS for longevity. Or don't, you do you boo. I remixed a few STLs together to create an ugly step-child that had all the features I needed. Newer Harbor Breeze Solar Lamp panels have a…
Print as you like. The antenna rod is 6mm in diameter, and the countersunk screw's thread is 4mm . Added a version for double sided tape and one for a M4 bolt.
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
I created this antenna mount for the Armattan Tadpole to make sure the antenna stays out of the props and is always upright for better reception. The coax clips in the back, zip ties are not required but male sure the antenna stays in…
Simple antenna strap for the Nanolongrange EVO quadcopter to make sure the antenna stays out of the props and is always upright This mounts to the battery tray with two M2 nylon screws Printed in Sainsmart TPU
This is a very basic winder for my antenna projects. There are many like this on the internet, so I'm setting an open license, have at it! I made this one to fit my needs. It is light and quick to print. The attached picture with Dynema…
