1 / 8
iFlight Nazgul Eco Dual Antenna and GPS Mount — zdjęcie 1
1 / 8

iFlight Nazgul Eco Dual Antenna and GPS Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,80 € – 0,97 € netto (bez VAT)

Dla pliku: iFlight Nazgul Eco Tail_XTBulkhead_0.4n_0.15mm_PETG_COREONE_58m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,89 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
58,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A mount for Nazgul Eco that tholds original XT60 at a better angle, 2 SMA connectors, a Walsknail GPS and RX T antena.

Ocena
5 / 5
Polubienia
6
Pobrania
101
Wydruki
0
Wyświetlenia
427
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a Walksnail M181 GPS and T antenna. It should fit any other frame with 10 mm OD, 30 mm high standoffs and 25 mm between them.

Print with supports in the material of your choice. Resolder the wires so that they are perpendicular to the XT60 connector. Insert the XT60 first, followed by the SMAs and the GPS. There is a bit of a tight fit inside, so some force may be required to insert the connectors.

Version that uses standard XT60 connector (glued in) is also aviable, in case you trash original one.

Check out my other FPV related things for more cool things. Happy printing and safe flying!

Tagi