P
Printables
front ELRS mount for iflight FPV drones
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
Wyniki wyszukiwania: elrs
Liczymy pasujące modele…
P
Printables
Speedybee TX800 Mount with ELRS receiver cradle
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
P
Printables
ELRS 2.4 GHz Diversity Antenna Mount
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
P
Printables
HDZero HALO ELRS Arm Mount B-Line Forty5
arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.
P
Printables
mark4 7 inch, xt60, vtx antena, elrs, gps holder/stand/mount
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
P
Printables
AOS 3.5 V2 midstack ELRS mount
AOS 3.5 V2 UNIVERSAL ELRS MOUNT Printed from tpu 95A . use high infill density (mine is 80%) due to it being slim for asthetics! Works with Radiomaster rp3 and probably more with it being universally sized. it also helps to hide a…
P
Printables
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
P
Printables
FlySky FS-i6X Custom Backplate (Radiomaster ELRS Nano Module + 2S 18650) | OpenTX Upgrade
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
P
Printables
ELRS USB Dongle Case
Summary Compact snap-fit enclosure for the https://manuel-alvarez-alvarez.github.io/elrs-usb/ project — an ESP32-S3 firmware that turns any ExpressLRS receiver into a USB HID game controller for flight simulators. Houses an ESP32-S3 Super…
P
Printables
PZ5- PinkyzUp 5 Analog vTX MMCX Antenna Mount and Rear Mounted ELRS Mount
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
P
Printables
ImpulseRC Apex 5 EVO - TPU Parts Collection (O3 / ELRS / O4Lite)
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
P
Printables
DJI and ELRS Antenna mount for AOS 5 Evo
Made this mount to hold the stock DJI antenna and a RM 2.4Ghz antenna on the AOS 5 EVO. I kicked out the antenna mount an extra ~3mm over the stock model to give the wiring a bit more room.
P
Printables
T-Antenna Boom Mount CRSF/ELRS (Heewing T1)
Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…
P
Printables
ELRS "Minimortal-T" style antenna for Recon 4 FR Microlonrange FPV Copter
I designed a vertical antenna mount for T-style antennas with best reception in all directions. It fits on the Rekon 4 frame with its 16mm distance between the spacers and probaply on tons of other frames too. Printed in Extrudr TPU on my…
P
Printables
front ELRS mount for iflight FPV drones
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
P
Printables
TBS Source One v4 Rear ELRS Diversity T Antenna Holder
A holder for HappyModel 2.4GHz EP1 Dual Diversity TCXO RX ELRS Receiver mounted at 90 degrees on the rear of a TBS Source One v4 frame. Printed in TPU.
P
Printables
GEPRC Mark2 5" - dual antena GEPRC ELRS
This is rear mount for GEPRC dual antena ELRS receiver. Please print it with TPU 95A or above. You have to print 2 pieces for one drone Category: R/C Vehicles
P
Printables
Kayouloin FPV Cam 19mm w/ RX ELRS
Kayouloin FPV Cam 19mm w/ RX ELRS. Category: 3D Printing
P
Printables
Kayouloin ELRS mount vertical (RP3)
Kayouloin ELRS mount vertical. (RP3) Category: 3D Printing
P
Printables
Kayoudur bumper ELRS mount
Remix KD Bumper avec support antenne ELRS Category: 3D Printing
P
Printables
Arm Mount for T-Style ELRS Antennas (eg: Rekon 10 Pro)
This custom 3D-printed tray is designed to house the Radiomaster DBR4 receiver in the dead center of the Rekon 10 Pro frame , positioned just below the 30x30 flight stack. The tray fits securely in the battery strap section, maintaining…
P
Printables
Standoff Mount for T-Style ELRS Antennas (eg: Rekon 10 Pro)
This custom TPU mount is designed for a vertical T-style antenna and attaches directly to a standoff on your FPV drone. While it was designed specifically for the Rekon 10 Pro frame, it may also work with other FPV drones that use similar…
P
Printables
Mount for ELRS antenna
Mount for ELRS antenna on the side of the drone. I have it installed on the Apex Evo 5-inch frame
P
Printables
25.5x25.5 (M2) ELRS Nano Receiver Holder/Mount
A simple and lightweight holder/mount for small radio receiver. Designed to suspend the receiver and keeping it from touching other conducting parts of the drone (You should still use proper heat shrink and insulation though). Print with…
P
Printables
T-Antenna Mount CRSF/ELRS (Heewing T2)
Three variants for T-antenna mounts for the Heewing T2. One for the boom and for glueing to the side behind the wing. I made one variant to sit higher up so it can fit inside the Heewing T2 carrying case. The two foam mounts can probably…
P
Printables
ELRS antenna mount for Mark4
Support… yes, sorry :) wall 3 infill 35-50% Filament - any kind of flex (tpu, elastan, etc.)
P
Printables
Speedybee TX800 Mount with ELRS receiver cradle
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
P
Printables
GEPRC MOZ7 O3 BetaFPV front ELRS Antenna clip
I made this remix to be able to install the BetaFPV 2G4 T-Antennas to the front of the GEPRC MOZ7 O3 frame. The base is now a little thicker and there two holes for M2 screws with recessed heads (M2x10). This way you install the antenna…
P
Printables
Optimized mount for the CineLog35 V2 frame, designed to securely hold ELRS and VTX antennas along with Diatone LED strips
This mount is designed specifically for Cinewhoop drones, tailored to fit the Cinelog35 V2 frame. It provides a secure and elegant solution for attaching both an analog VTX antenna and an ELRS antenna while maintaining a clean,…
P
Printables
ELRS BetaFPV Nano RX holder for 25x25 frame
you know, no one likes frames full of zip-ties, especially blocking such a small receiver with a bit of adhesive is not a good job, so I created a support to hold the receiver over the VTX or any frame large 25,5 x 25,5 I used fiberlogy…
P
Printables
Sharmo - TBS Source One V5 ELRS + GPS + VTX Antenna Holder
Here is a single part that can be printed easily in one part that holds the VTX, Immortal T ELRS antenna and speedybee GPS in one part. This part is suitable for a GPS module that is 18mm x 18mm. If you need another size please comment…
P
Printables
ELRS Receiver Mount
Simple mount for ELRS Receiver with the "Flat" antenna. Sized to fit a 25mm x 25mm stack. Sized to fit the BetaFPV Lite Receiver with the Flat Antenna (Roughly 12mm x 12mm). The small box is built in support that is designed to be…
P
Printables
elrs antenna mount with zip tie (kayouframes backpack inspiration)
very thight fit would recomend printing at 50% can be used for any frames with 20mm spacing at the back
P
Printables
AOS5 ELRS Antenna Mount
ELRS Antenna Mount for AOS5 Frame. Print without supports, easy fit with no need to remove IPEX connector from receiver.
P
Printables
ELRS T antenna mount for HGLRC Draknight
Made for this antenna - https://a.aliexpress.com/_EHRjSl6 I printed it from PETG, but you can try print it from TPU or something other I added a little glue between the antenna and the mount to make it sit more securely in place and to…
P
Printables
Baby mod X vtx and elrs antenna mounts
Couldn't find any nice antenna mounts so i quickly made these up to fill the void
P
Printables
Case for Mateksys ELRS R24-P6V Receiver
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
P
Printables
Case for Mateksys ELRS-R24-V Receiver
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
P
Printables
BetaFPV ELRS 2.4G Nano TX Module Case
Case for the BetaFPV ELRS 2.4G Nano TX Module: After I broke my antenna from screwing it on and off after every flight. I decided to design a simple case for the TX module + antenna. Better than throwing it in my backpack every time.…
P
Printables
Diatone roma F5 ELRS antenna support
Just au support for the 2.4ghz antenna. Category: Other
P
Printables
Mark IV Antenna mount for Analog VTX and ELRS RX
Analog VTX pigtail and ELRS antenna mount for Geprc Mark IV and clone. I was able to print without supports by using 25% gyroid infill printed before walls. Any material I have used seems to work fine but 98 hardness TPU would be ideal…
P
Printables
Backpack source one V5 dual sma & elrs
backpack for Source one v5 : ELrs antenna + dual sma (for walksnail HD for example, or any dual antenna vtx) Print in TPU (mandatory, if printed in non-soft material, you won't be able to place the sma plugs) , layer 0.2 Category: R/C…
P
Printables
TBS Source One V5 tail mount for lollipop and elrs antennas
TBS Source One V5 mount for Foxeer Lollipop 4 antenna and elrs T antenna. Should fit most lollipops with ~17.5mm diameter. Mine is with UF.L soft small cable so it fits through perfectly. rigid SMA style would probably not work here,…
P
Printables
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…
P
Printables
ImpulseRc Apex Back End - Elrs 04 air unit - XT60
….The 04 antennae mounts have been extended slightly to better protect them…ignore the quality of the tpu..its wet through and iv ran out. This is very tight to fit everything in, you don't have to use the gemini reciever using something…
P
Printables
FPV ELRS Antenna & Module Mount
This holder is designed for securely mounting an ELRS module and FPV antenna on hexagonal rods. It fits rods with a width of 5mm, a center-to-center distance of 24mm, and a height of 20mm. Optimized for stable installation and easy 3D…
P
Printables
Flywoo Explorer O4 Pro ELRS Gemini Antenna mount
Flywoo Explorer O4 Pro ELRS Gemini Antenna mount, longer mounts for O4 pro antennas and elrs gemini dual band antenna. Printed with TPU with supports.
P
Printables
Radiomaster Boxer ELRS antenna mod
Remixed version Print it in hard TPU. I also recommend using an antenna with a longer cable, especially if you plan to rotate it. Adapter for the Radiomaster antenna Recently, I tried this antenna from Radiomaster: It provides slightly…
P
Printables
Radiomaster Boxer ELRS antenna mod
Remixed version Print it in hard TPU. I also recommend using an antenna with a longer cable, especially if you plan to rotate it. Adapter for the Radiomaster antenna Recently, I tried this antenna from Radiomaster: It provides slightly…
P
Printables
screw for ELRS antenna
I modified my Zorro radio by replacing the original antenna with an external one. However, the nut securing the connector is located inside the radio housing, making it very difficult to properly tighten or loosen when switching antennas.…
P
Printables
TBS Source One v5 VTX antenna and ELRS antenna Mount Low Poly
A mount for a lollipop antenna and elrs antenna made out of TPU.
P
Printables
Cineape 35 Dual Sma antenna + ELRS antenna Mount
I wanted to install a Walksnail Moonlight VTX onto my cineape35 using dual SMA antennas. The oem walksnail antennas are too short and routing for the antennas would require absurdly long ufl antennas. I also hate installing the ufl…
P
Printables
JeNo 5.1" - Happymodel ELRS EP1 mounted over DJI O3
JeNo 5.1" - Happymodel ELRS EP1 mounted over DJI O3
P
Printables
ImpulseRC Apex Apex EVO Apec evo DC 04 air unit Elrs Gemini 2.4
one of the 2.4 antenna needs to be pushed in from inside the mount (from the back) the other needs to be bent to get into the other section. once in position, i used a small amount of epoxy glue just to keep them from moving. more than…
P
Printables
ELRS for TBS Tango 2
Mounting bracket for ELRS module Beta fv nano tx V2 with stock fan You will need the Happymodel Tango 2 Power Adapter for this mod As the beta fpv module is a little larger than the happymodel one, you will need to mod your Tango a…
P
Printables
Skyzone Cobra S/X ELRS receiver cover
The new Fusion Board for the V3.3 Steadyview receiver in an ELRS version is a bit longer than the regular one. The standard cover doesn't fit. This is a custom made cover that fits the new ELRS Fusion Board.
P
Printables
Geprc MOZ7 -bumper with horizontal ELRS antenna mount
Bumper for Geprc MOZ7 frame with horizontal ELRS antenna mount I recommend printing upside down. Print from TPU
P
Printables
ELRS and VTX SMA antenna mount/ holder for Aries4 Physital drone
two parts to be printed, one for elrs antenna, another for sma VTX
P
Printables
Paramotor HobbyKing V1 V2 Support RX ER5A V2 ELRS
RX ELRS : ER5A V2 2.4GHz ELRS PWM Receiver TPU : 3 murs 20% gyro
P
Printables
Remix Support Antenne RX ELRS BETAFPV pour RADIOMASTER BOXER
Remix Support Antenne RX ELRS BETAFPV pour RADIOMASTER BOXER
P
Printables
Radiomaster DBR4 ELRS Receiver Mount
Radiomaster DBR4 ELRS Receiver Mount with antennas lock
P
Printables
30mm 250 GPS/ELRS antenna mount
Mount made for drones with standoffs 30mm apart (center to center) to hold a 25mm GPS and ELRS antenna Part of the model needs to be cut to fit the GPS in to place if you're using a filament that cant easily flex
P
Printables
ELRS 2.4 GHz Diversity Antenna Mount
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
P
Printables
HDZero HALO ELRS Arm Mount B-Line Forty5
arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.
P
Printables
Happymodel EP1 TXCO ELRS
Happymodel EP1 TXCO Express LRS receiver 3D model based on the data provided by the product page.3D model based on the data provided by the product page. Feel free to contact me if you spot errors in the model or if you have…
P
Printables
Dual antenna, gps and elrs mount for Mark4 V2 frame
This is a dual-antenna, GPS and 2.4GHz elrs antenna mount designed for the 7/8/9/10inch Mark4 V2 frame. Antenna used: Foxeer Lollipop V4 Gps used: HGLRC M100, It may also be compatible with other GPS modules. The mount is ideal for…
P
Printables
QAV-S JB Edition ELRS Antenna Mount
I found a couple of the existing ELRS antenna mounts were rectangle and a little on the smaller side. So I designed this one to hold the Radio Master ELRS antennas on the QAV-S
P
Printables
ELRS Diversity Antenna Mount
I designed this mount while testing drone parts, since I didn’t have the space or time to properly mount my ELRS antennas. With this print, you can route the antenna wires through the holes provided, secure the T-antenna to the holder…
P
Printables
ESP32-S3 - ELRS receiver Сase
I programmed a device that receives data from the ELRS remote control via the CRSF protocol, processes it and transmits it to the computer. The computer receives input from the remote control as input from a joystick. This can be useful…
P
Printables
mark4 7 inch, xt60, vtx antena, elrs, gps holder/stand/mount
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
P
Printables
KL BUMPER 19mm 30deg 900MHz ELRS
Front bumper for kayouloin frame by kayouframe. I add a lock angle for the fpv cam and simplify the mount of the elrs 900MHz antenna
P
Printables
Tango 2 Internal ELRS mod (SuperG)
Tango 2 Internal ELRS mod with BETAFPV SuperG Nano 2.4GHz TX The main manual in the original model. Receiver mod steps: - unsolder the SMA connector - unsolder the USB-C connector - unsolder 4PIN data connector - solder the U.FL (IPEX)…
P
Printables
ELRS TX case cooler lid
This is simply a cooler looking version of ssombras Happymodel ELRS TX module case lid. The model for the case is the same as the original, except it is 2,2mm shorter, so that the lid sits flush with the radio. The space for the antenna…
P
Printables
SpeedyBee Master 5 V2 ELRS diversity antenna mount
Easy to print, light and simple mount for your diversity antennas. It only works with TPU or other bendable materials. The hooks are for vibration dampening, to ensure that the antennas don't wear out over time. To install the antennas…
P
Printables
ELRS ES24TX Slim lid
I don't like the Ironman design that Happymodel put in the Xlite module for Expresslrs so I designed this simple lid to replace it. Due to the limitations of 3D printing and with the aim of making the model support free I didn't add the…
P
Printables
AOS 3.5 V2 midstack ELRS mount
AOS 3.5 V2 UNIVERSAL ELRS MOUNT Printed from tpu 95A . use high infill density (mine is 80%) due to it being slim for asthetics! Works with Radiomaster rp3 and probably more with it being universally sized. it also helps to hide a…
P
Printables
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
P
Printables
GEPRC mark4 5-inch m100 gps + VTX SMA pigtail + elrs antenna
This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out. Printed in PLA with 15% infill split in…
P
Printables
FlySky FS-i6X Custom Backplate (Radiomaster ELRS Nano Module + 2S 18650) | OpenTX Upgrade
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
P
Printables
ELRS USB Dongle Case
Summary Compact snap-fit enclosure for the https://manuel-alvarez-alvarez.github.io/elrs-usb/ project — an ESP32-S3 firmware that turns any ExpressLRS receiver into a USB HID game controller for flight simulators. Houses an ESP32-S3 Super…
P
Printables
PAVO20 PRO II TPU SET (Battery, ELRS, O4 PRO Antennas, Camera and Canopy, ViFly Finder Mini, XT30).
This is my full TPU set for the pavo20 pro II. It is designed to provide protection and longevity, since I use this as an actual cinewhoop for filming jobs. Adds some weight, for me thats worth it on a cinewhoop. If you want to freestyle…
P
Printables
Source One v6 Radiomaster XR4 ELRS Antenna Arm Mount
Design Philosophy The design philosophy behind this mount is to fulfill as many placement requirements as possible. It keeps the antenna off the carbon fiber frame to reduce interference. It allows both antennas to be placed perpendicular…
P
Printables
TBS SourceOneV3 2.4GHz ELRS Antenna Mount
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
P
Printables
JeNo 5,1" ELRS antenna mount
Hi! JeNo 5,1" ELRS antenna mount Print upside down, without support, in TPU 30%infill 💡 For full versions, optimized models and more options 👉 https://cults3d.com/@-kC- 📦 All my designs and more : https://atelierkc.fr
P
Printables
KL Bumper O3 Exposed ELRS TPU
Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
P
Printables
PZ5- PinkyzUp 5 Analog vTX MMCX Antenna Mount and Rear Mounted ELRS Mount
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
P
Printables
Happy Model PWM6 ELRS Case
I like the original but felt it needed more room for the antenna wire, and a piece on the top to hold the antenna connector in place.
P
Printables
ImpulseRC Apex 5 EVO - TPU Parts Collection (O3 / ELRS / O4Lite)
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
P
Printables
ImpulseRC Apex 5 EVO - TPU Parts Collection (O3 / ELRS / O4Lite)
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
P
Printables
JeNo5_1.5+_Bumper_Back_Bottom 3mm ELRS Antenna
JeNo 5.1" - Bumper Back Bottom 3mm for betafpv and happymodel elrs
P
Printables
GEPRC Mark 5 Receiver Mount - DJI O4 Lite (Foxeer 15cm) & Radiomaster RP3 Dual ELRS
This is a custom-designed TPU antenna mount for the GEPRC Mark 5 frame. It is specifically tailored for the DJI O4 Lite Air Unit setup combined with a Dual ELRS receiver system. Key Features: Optimized for O4 Lite: Designed for a single…