1 / 6
Jumper T14 elrs 2.4ghz Low Profile Antenna mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile antenna mod
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I don't like how the antenna takes some unnecessary space on the T14, since the original 2.4Ghz antenna is really small there is no need for that big enclosure.
As long you don't use vertical polarized this mod would not cause any reduction on the signal.
wrapping the antenna on heat shrink would be recommended but not 100% necessary.