ELRS Diversity Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A proven mount designed to accommodate diversity ELRS modules and their antennas for long-range FPV builds.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this mount while testing drone parts, since I didn’t have the space or time to properly mount my ELRS antennas.
With this print, you can route the antenna wires through the holes provided, secure the T-antenna to the holder arms with zip ties or glue, connect the ELRS module to your drone, and then simply press the entire piece onto your stack (ideally fastening it with nuts).
The arms are angled to provide wide signal coverage both horizontally and vertically. In my brief testing, this setup more than doubled the range compared to mounting the antennas flat on the frame.
UPDATE: Version 2 fixes a problem where certain stacks' USB ports were inaccessible due to the arm blocking it.