224 models
I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…
canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.
I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Its my first try to build a mount like this, maybe some newer version will follow. Printed in TPU.
This is a remix of the official ExpressLRS JR module bay. I noticed that the official one didn't fully lock into the JR module slot, and after a bit of tinkering I found out that the little clip is way too long, and doesn't engage with…
The new Fusion Board for the V3.3 Steadyview receiver in an ELRS version is a bit longer than the regular one. The standard cover doesn't fit. This is a custom made cover that fits the new ELRS Fusion Board.
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
Happymodel EP1 2.4g ELRS antenna mount for the AOS 3.5 frame. 4mm height at the standoff mounts, gives enough clearance for the VTX antenna mount. Print with TPU, 25% infill, 5 perimeters. Bend the two halves of the mount, then bend the…
Made an antenna mount for vista/03 air unit and with elrs antenna mount for the source one V3 frame. There are two models, one for 25mm standoffs and one for 30mm standoffs. Print as is, i use petg for less flex, less vibrations.
Threw this model together to mount my T-shaped ELRS antenna below the mount for my rhcp antenna, on the tail. I pulled the outer dimensions from pokey_fpv's mounts, but the model is otherwise from scratch in Fusion 360.
Kayouloin ELRS mount vertical. (RP3) Category: 3D Printing
Bumper for Geprc MOZ7 frame. Two versions Just bumper Bumper with dual ELRS antenna mount Insert antenna into bumper can be little tricky because entry space is only 0.5mm. I used Happymodel ELRS antenna. For example antenna from…
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC ApexMicro ELRS-Antennaholder for 2.4G Radiomaster-Antennas How to Print…
This custom TPU mount is designed for a vertical T-style antenna and attaches directly to a standoff on your FPV drone. While it was designed specifically for the Rekon 10 Pro frame, it may also work with other FPV drones that use similar…
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
This is a backpack for the kayoumini, the Happymodel Crown antenna, and an ELRS T-Antenna. An 18AWG power cable should fit on top, but I didn't test that. There's a short and a long version. The short one is a quick edit in Meshmixer,…
Design Philosophy The design philosophy behind this mount is to fulfill as many placement requirements as possible. It keeps the antenna off the carbon fiber frame to reduce interference. It allows both antennas to be placed perpendicular…
T Antenna mount for Elrs receiver Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: Doesn't Matter Filament: Overture TPU Orange Category: R/C Vehicles
But didn't TPU parts come with the frame? yes, and if those work for you, by all means, use them, the ones that were in my package had good quality. I've made my own ELRS antenna mount, as the included immortal-t antenna mount assumes a…
ELRS antenna mount (TBS source one V5) My 2 front arms are just screws as you can see. Works just fine and the screws are covered by the mount.
T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added
Cinelog35 Antenna mount with ELRS ___ Cinelog35 Gopro 12 (9-12) Mount
This is a 2-part design Part 1 - Antenna holder for a small ELRS T-style antenna. It's likely others will fit just fine. Attach the antenna with cable ties The antenna is meant to fit partially under the main bottom frame and the bracket…
Toothpick style canopy deigned to accept: HDZero - Nano camera RX - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place) VTX antenna - friction fit or glue This version of the canopy is intended for use with…
I did create this Vista antenna protection for my Kayoudur 5inch frame: Added 25° and 45°. I added ELRS antenna mount (I use Happymodel EP1). Print Settings Printer Brand: Artillery Printer: Artillery Genius Rafts: No Supports: Yes…
ELRS Antenna holder for ShenDrones Squirt V2. Holds an antenna from a Happymodel EP1, can be used with two zip ties to secure but is very snug so doesn't really need the zip tie. Printed with TPU with NO SUPPORTS at 35% infill. Print…
ELRS Dipole antenna holder. I have a BETAFPV Nano Rx, but it should fit any dipole antenna. The distance is 18mm in between. The fit is as snug as it gets , it requires some patience to insert the antenna ends. Print Settings Printer:…
This is rear mount for GEPRC dual antena ELRS receiver. Please print it with TPU 95A or above. You have to print 2 pieces for one drone Category: R/C Vehicles
Case for Happymodel ES900TX ELRS module, with fan space. Printing Print the model in any material where there are the leds there are holes of the right size for using transparent filament to bring the light on the outer part.
When I accidentaly connected battery to receiver with opposite polarity, I created this casing, that it cannot be done anymore.
Use .2MM layer height 10mm x 5mm x 2mm Neodymium Magnets for easy opening.
Holds a Gemini Elrs Reciever Snugly
This mount is designed specifically for Cinewhoop drones, tailored to fit the Cinelog35 V2 frame. It provides a secure and elegant solution for attaching both an analog VTX antenna and an ELRS antenna while maintaining a clean,…
Happy bashing, the best setup I found. I am looking to give credit to the original author, but i cant find the author anywhere on the big 3 sites so I am uploading here. Comment if you find him.
Remix Support Antenne RX ELRS BETAFPV pour RADIOMASTER BOXER
Antennenhalter für das ELRS Modul einer TX16 als Ersatz für den original Antennenhalter --------------------------- Holder for the TX16 and the ELRS modul antenna as replace for the original antenna holder
JeNo 5.1" - Happymodel ELRS EP1 mounted over DJI O3
Created this for my OMP M4 Max helicopter, which uses a Nexus-XR flybarless unit with built-in ELRS receiver. I printed this in PC Blend because I had it in a color that matches the orange canopy, but PETG works too. It needs to be…
Front bumper for kayouloin frame by kayouframe. I add a lock angle for the fpv cam and simplify the mount of the elrs 900MHz antenna
Antennenhalter für das ELRS Modul einer TX16 Holder for the TX16 and the ELRS modul antenna Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 50 % Filament:…
Remix KD Bumper avec support antenne ELRS Category: 3D Printing
Wanted to have a sturdy print to hold 3 components. XT60, VTX antenna and ELRS antenna. This is it. Tested by 'intentionally' crashing and it survived.
A box for the XIAO SAMD21 + BetaFPF ELRS SuperD receiver
Happymodel EP1 TXCO Express LRS receiver 3D model based on the data provided by the product page.3D model based on the data provided by the product page. Feel free to contact me if you spot errors in the model or if you have…
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
Simple mount for ELRS Receiver with the "Flat" antenna. Sized to fit a 25mm x 25mm stack. Sized to fit the BetaFPV Lite Receiver with the Flat Antenna (Roughly 12mm x 12mm). The small box is built in support that is designed to be…
very thight fit would recomend printing at 50% can be used for any frames with 20mm spacing at the back
Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
antenne elrs flywoo , fichier f3d / .step / stl
Kayouloin front bumper made to hold a 22mm camera at a 30 degrees angle, with ELRS antenna.
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
AOS 3.5 V2 UNIVERSAL ELRS MOUNT Printed from tpu 95A . use high infill density (mine is 80%) due to it being slim for asthetics! Works with Radiomaster rp3 and probably more with it being universally sized. it also helps to hide a…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
Summary Compact snap-fit enclosure for the https://manuel-alvarez-alvarez.github.io/elrs-usb/ project — an ESP32-S3 firmware that turns any ExpressLRS receiver into a USB HID game controller for flight simulators. Houses an ESP32-S3 Super…
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
Made this mount to hold the stock DJI antenna and a RM 2.4Ghz antenna on the AOS 5 EVO. I kicked out the antenna mount an extra ~3mm over the stock model to give the wiring a bit more room.
Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…
I designed a vertical antenna mount for T-style antennas with best reception in all directions. It fits on the Rekon 4 frame with its 16mm distance between the spacers and probaply on tons of other frames too. Printed in Extrudr TPU on my…
A holder for HappyModel 2.4GHz EP1 Dual Diversity TCXO RX ELRS Receiver mounted at 90 degrees on the rear of a TBS Source One v4 frame. Printed in TPU.
Kayouloin FPV Cam 19mm w/ RX ELRS. Category: 3D Printing
This custom 3D-printed tray is designed to house the Radiomaster DBR4 receiver in the dead center of the Rekon 10 Pro frame , positioned just below the 30x30 flight stack. The tray fits securely in the battery strap section, maintaining…
Mount for ELRS antenna on the side of the drone. I have it installed on the Apex Evo 5-inch frame
A simple and lightweight holder/mount for small radio receiver. Designed to suspend the receiver and keeping it from touching other conducting parts of the drone (You should still use proper heat shrink and insulation though). Print with…
Three variants for T-antenna mounts for the Heewing T2. One for the boom and for glueing to the side behind the wing. I made one variant to sit higher up so it can fit inside the Heewing T2 carrying case. The two foam mounts can probably…
Support… yes, sorry :) wall 3 infill 35-50% Filament - any kind of flex (tpu, elastan, etc.)
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
I made this remix to be able to install the BetaFPV 2G4 T-Antennas to the front of the GEPRC MOZ7 O3 frame. The base is now a little thicker and there two holes for M2 screws with recessed heads (M2x10). This way you install the antenna…
you know, no one likes frames full of zip-ties, especially blocking such a small receiver with a bit of adhesive is not a good job, so I created a support to hold the receiver over the VTX or any frame large 25,5 x 25,5 I used fiberlogy…
Here is a single part that can be printed easily in one part that holds the VTX, Immortal T ELRS antenna and speedybee GPS in one part. This part is suitable for a GPS module that is 18mm x 18mm. If you need another size please comment…
ELRS Antenna Mount for AOS5 Frame. Print without supports, easy fit with no need to remove IPEX connector from receiver.
Made for this antenna - https://a.aliexpress.com/_EHRjSl6 I printed it from PETG, but you can try print it from TPU or something other I added a little glue between the antenna and the mount to make it sit more securely in place and to…
Couldn't find any nice antenna mounts so i quickly made these up to fill the void
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
Case for the BetaFPV ELRS 2.4G Nano TX Module: After I broke my antenna from screwing it on and off after every flight. I decided to design a simple case for the TX module + antenna. Better than throwing it in my backpack every time.…
Just au support for the 2.4ghz antenna. Category: Other
Analog VTX pigtail and ELRS antenna mount for Geprc Mark IV and clone. I was able to print without supports by using 25% gyroid infill printed before walls. Any material I have used seems to work fine but 98 hardness TPU would be ideal…
backpack for Source one v5 : ELrs antenna + dual sma (for walksnail HD for example, or any dual antenna vtx) Print in TPU (mandatory, if printed in non-soft material, you won't be able to place the sma plugs) , layer 0.2 Category: R/C…
TBS Source One V5 mount for Foxeer Lollipop 4 antenna and elrs T antenna. Should fit most lollipops with ~17.5mm diameter. Mine is with UF.L soft small cable so it fits through perfectly. rigid SMA style would probably not work here,…
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…
….The 04 antennae mounts have been extended slightly to better protect them…ignore the quality of the tpu..its wet through and iv ran out. This is very tight to fit everything in, you don't have to use the gemini reciever using something…
This holder is designed for securely mounting an ELRS module and FPV antenna on hexagonal rods. It fits rods with a width of 5mm, a center-to-center distance of 24mm, and a height of 20mm. Optimized for stable installation and easy 3D…
Flywoo Explorer O4 Pro ELRS Gemini Antenna mount, longer mounts for O4 pro antennas and elrs gemini dual band antenna. Printed with TPU with supports.
Remixed version Print it in hard TPU. I also recommend using an antenna with a longer cable, especially if you plan to rotate it. Adapter for the Radiomaster antenna Recently, I tried this antenna from Radiomaster: It provides slightly…
Remixed version Print it in hard TPU. I also recommend using an antenna with a longer cable, especially if you plan to rotate it. Adapter for the Radiomaster antenna Recently, I tried this antenna from Radiomaster: It provides slightly…
I modified my Zorro radio by replacing the original antenna with an external one. However, the nut securing the connector is located inside the radio housing, making it very difficult to properly tighten or loosen when switching antennas.…
A mount for a lollipop antenna and elrs antenna made out of TPU.
I wanted to install a Walksnail Moonlight VTX onto my cineape35 using dual SMA antennas. The oem walksnail antennas are too short and routing for the antennas would require absurdly long ufl antennas. I also hate installing the ufl…
one of the 2.4 antenna needs to be pushed in from inside the mount (from the back) the other needs to be bent to get into the other section. once in position, i used a small amount of epoxy glue just to keep them from moving. more than…
