TBS SourceOneV3 2.4GHz ELRS Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ExpressLRS antenna mount for the TBS SourceOneV3 frame.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 900
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna.
The holes for the poles of the frame have a diameter of 5.2mm and their distance is 30mm.
Update(2022-03-03): Uploaded a version for 6mm standoffs.
Update(2022-02-04): If you like the concept of how the antenna is mounted but it does not fit to your frame, then let me know for which frame do you need it, which size the holes for the standoffs have to be and the distance of them. These parameters are so easy to change that I will try to upload new versions in time.
Update(2022-02-01): I also uploaded a version with 5mm holes for the standoffs to get a slightly tighter fit.
For example, here are two other versions and an in the bumper integrated version:
SourceOnveV3 bumper integrated
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament: 3DWarHorse TPU
Category: R/C Vehicles