Liczymy pasujące modele…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
The fans of MSI RTX 5090 Ventus 3X are very loud and the GPU runs hot. I wanted to replace the fans with better Noctua fans. Here is the deshroud bracket I designed. It probably won't decrease temperatures much, but sound level and pitch…
The fans on my RTX 3060 Ti just broke out of nowhere — one of those misfortunes that happen without warning and at the worst possible time. To make matters worse, they refused me the warranty, leaving me with a working graphics card...…
One of the fans on my graphics card gave out, so I set out to design a custom shroud that can hold 120 mm Noctua Chromax Black fans, and it should work just as well with 120 mm Be Quiet fans. The shroud mounts directly onto the cooler…
Finally after several trial and error, I managed to create the GPU travel kit for my GPU, which is: Inno3D RTX 5080 X3 OC (the one with vapor chamber) the 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
This is a High detail version of my previous 3d model of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). Over the past 4…
special thanks for RejZoR for inspiration I encountered high temperatures on my 3080ti GamePro even after replacing the paste and thermal pads. I found a RejZoR solution for mounting three 92x92x25mm fans instead of the standard ones.…
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
The arm for the original/parent model did not allow the tool to align properly. This version has the screw thread rotated 100º so that the switches are top centred.
I designed a second mount for my MSI RTX 5060 Ti. A friend told me that this is necessary for long GPUs to have a second mount, because the leverage force can put the VRAM in bad condition. Anyway, it’s specifically made for the MSI…
I built a custom fan adapter for the RTX 8000 to support a radial blower fan. It’s designed specifically for the BFB1012 size, which is a powerful blower often used for efficient, directed cooling. It sits press fit without the need of…
Just a small bracket to prevent GPU sag on EVGA RTX 3080. Mine is mounted on Corsair H150i radiator with 15mm gap on center between the screws. Just used M3 x 6mm screws to mount. It's a tight fit and have to install the bottom screw…
I designed a 90 mm high support to prevent the graphics card from bending the PCI-Express slot. I made the front in the shape of a honeycomb in order not to block the air passage. You can paste it by printing various shapes on it.
My 2080 Super had an SLI cover with the stock backplate. After adding a waterblock, it no longer fit. This is a drop in replacement. I have not tested this, but it should work on all RTX/Latest gen cards.
Either print Black and Silver with dual extrusion (printing with 2 plastics) or print the Full version. You can, but it is very hard to, print this design in 2 colours seperately and later assemble them. I have seen someone do it.…
A USB Thumb drive in the style of the RTX 2080 Founders Edition by Nvidia. It is a dual extrusion print. I used Ultimaker Black PLA and Silver PLA or Gold PLA. The bottom plate is loose so that it is easier to remove supports. I used a…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
It's a keychain, designed based on RTX 4090 Graphics card. The fan is movable, you can rotate by your fingertips. Easy to assemble.
This 3D model file offers a customized top cover and front bezel designed specifically for the Lenovo M920q to accommodate the MSI RTX 3050 LP 6G graphics card. The top cover has been extended by 10mm to ensure a perfect fit for the GPU,…
This will fit the width of the print bed on a MK3S+ almost exactly. Material: PETG (PLA might be ok but it may warp with heat over time being close to the GPU) Supports: None Infill: 20-30% I found a cheap Dell RTX 3070 during the…
Enhance your Lenovo M90q with this custom-designed 3D case tailored for the RTX A2000. This 3D model file is designed to optimize airflow, maintain compact size, and enhance the overall aesthetics of your setup. The model ensures…
A miniature RTX 3080 simplified for 3D printing, as the real shape is too complex to print easily. One solid piece, no moving parts. There isn't a perfect orientation to print this in, but I've had the best results facing the RTX logo up…
I got this Lenovo P330 Tiny back in March of 2024. I mostly used this as a NAS. Its stock configuration included a 2 GB external GPU, which worked fine for basic tasks. I also played some games on it like FH4, and FIFA 18. While exploring…
Transform your tiny/micro PC into a high-performance powerhouse with our RTX A2000 OCuP4 V2 Enclosure designed for OCuLink eGPU setups. This compact and efficient enclosure is perfect for gaming, professional work, and any GPU-intensive…
I loved the original Epsilon V2, but it wasnt long enough to fit an Asus 4060LP. The Asus card is slightly longer than the A2000 or the Gigabyte 4060LP. I also wanted to make a more porous airflow style configuration of this case. This…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
I couldnt find a shroud for this specific GPU model so designed one myself. You can revert this mod without trace in case you want to sell the GPU. Printing: Depending on the printer the shroud could be too big to fit horizontally. Either…
The card is scaled down a bit to fit on the print bed, if you want the original size, you can scale this back up to 142% in your slicer to get the original size.
Custom Bracket for Yeston RTX 3050 Low profile card to fit Lenovo Tiny M90q V2 file - my second m90q gen 3 seems to have a little tab on top cover, so edited to ensure there is clearance for tab. PLEASE NOTE: some users have said there is…
Anti-Sag Bracket for the MSI Ventus 3x RTX 3080 in the FormD T1 V1.1. It mounts to the SSD holder holes. print in PETG with 100% infill and 0.2 layer height. Needs 2x M3 threaded melt inserts (holes are 4 mm dia. and 7mm deep) the card…
Remix of Eigas original model but fits the MSI RTX 5080 INSPIRE 3X OC (the gold one). In the cover photo the thicker one is the one I remixed, Eigas is the thinner one on top.
This file contains my personal documentation for integrating an RTX 3050 GPU with the EXP GDC TH3P4GAN GPU Dock, complemented by a custom-designed 3D-printed case. Inside, you'll find detailed design notes, CAD files, assembly…
I (re)designed this support bracket to provide better stability for an MSI RTX 5070 Ti Ventus 3X graphics card inside an
Another Model for the Beads Contest but this time, its a graphics card. Its multicolored so you can color it however you want. I suggest printing it in a lower layer height or turning on variable layer height if you don't want to see…
This is a rear bracket for the Formd T1 v2.1 and 2.5, specifically designed for the MSI RTX 5080 Inspire. This greatly reduces wobble on the GPU especially for people who travel a lot with their PC. I use this and a remix I made of Eigas…
Custom Bracket for Yeston RTX 3050 Low profile card to fit Lenovo M720q. Allows for easy closing of top part of case. Printed in 100% infill PLA+ or can use PETG.
I made this using Hueforge and four PLA filaments. Unless you know what you're doing, you should use the included 3mf files unmodified in Bambu (or other slicer) to print the GB202 die file because it requires a specific layer height…
This one's pretty niche but I figured there might be someone out there with the same issue as me. The contours of the support match the 3080 FTW from EVGA and possibly the 3080TI and other cards with the same cooler. All of this is almost…
First, a shout out to the following creators whose GPU support models saved me a lot of time since they already had modeled the front panel hole locations. unknow1assassin | Printables.com aeberbach | Printables.com This is a GPU support…
Layer height: 0.2mm Bill of materials 3 Noctua NF-A9 PWM chromax.black.swap Arctic 4-Pin PWM Fan Splitter Cable (to daizy cain the fans) 4-Pin PWM adapter to small 4-Pin (to connect the fans to the GPU mainboard) 4 additional black fan…
I love the RTX 3080 Piggy Bank by Nils Kal! I decided to draw new fans that closely match the original 3080 fans. I included STL files, a 3mf file and a gcode file. Share a picture if you print one!
The Best position for GPU cooling, 5080 FE is all all-throughflow design, so most space behind the card is desirable. The front and rear brackets makes a solid connection to the case. You need to install the bracket on the GPU first, then…
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
Screw-in clip to keep a Dell VRTX 4U from sliding out of a server rack. Uses M3 nuts and bolts.
used regular .2mm print profile print with supports backplate is optional
Screw-in clip to keep a Dell VRTX 4U from sliding out of a server rack. Uses M3 nuts and bolts.
A drink coaster in the shape of the RTX 5090 founders edition's main PCB assembly. Should be pretty close to actual size. Multi color and single color files are available. All of the major components should be represented fairly…
I had a PC that needed a second video card for LLM work. It was in a mid-sized tower, so I needed to put the card externally. This caddy ensures it is secure and off the floor. Not pictured under it are four rubber feet to ensure it…
Nvidia GeForce RTX Logo. Created in TinkerCad. To be Colour like on the Photo just Use AMS for better Effect.
The fans of MSI RTX 5090 Ventus 3X are very loud and the GPU runs hot. I wanted to replace the fans with better Noctua fans. Here is the deshroud bracket I designed. It probably won't decrease temperatures much, but sound level and pitch…
Instructions The standoffs for the riser cable must be raised a little bit, since it will put force onto the back side of the graphics card. It also reduces the risk of the riser cable touching the CPU mounting backplate. You need 2 x…
This is a deshroud bracket designed for the ASUS PRIME 5070 Ti/5080 series, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
This is a deshroud bracket designed for the MSI Suprim X RTX 4080 and 4090, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
Original SMX Heinz design of the 3D printed slot 3.00 & 3.25 flipped travel kit. Designed to use with ABS filament. If you print with other filament you may have to adjust shrinkage compensation to get the correct dimensions. Installation…
I wanted a way to display my Arrtx acrylic pens and use them at the same time. I think I opted in a unique way to display them. Hope someone else enjoys these.
I built a custom fan shroud for the MSI RTX 2080 (and Super), allowing me to mount three case fans instead of the original GPU fans. For this setup, I used three BeQuiet! Pure Wings 2 fans. The result: the graphics card now runs both…
Note: This blower style cooler requires destruction of the GPU's fans' blades. I recommend buying an OEM replacement fan pair and preserve the original fans/shroud for resell/warranty purposes. While blower style GPUs exist, my niche…
Hi, This is a Deshroud mod for my Gigabyte RTX 4080 OC . It makes the GPU 4 PCIe slots tall, but it’s now quieter than the coil whine of my CPU. The mod reuses all the original shroud screws except one. For that one, you can either skip…
Recommend smaller resolution for smoother height stepping. Print in any colour to add your own accent piece. Tested on FTW3 only, because of the size difference it will not work with XC3 variants. Should work with RTX 3070 FTW3 as well.…
This is a duct for the nvidia rtx pro 6000 server edition, compatible with 120mm fans. I tested with a noctua industrial The server edition doesn't have any fan as it's expected to use in a server chassis with enterprise grade fans. So…
This is a duct for the nvidia rtx pro 6000 server edition, compatible with 120mm fans. I tested with a noctua industrial THIS IS FOR THE FRONT PART. Use https://www.printables.com/model/1429603-nvidia-rtx-pro-6000-server-edition-back-duct…
This support bracket is provide better stability for an MSI RTX 5070 TI 3x Shadow graphics card inside a Fractal Design Define 7 case.
Had to cut a hole in my Silverstone SG13 SFF case to fit a RTX2070 Super card into it. The fans stick out the side of the case so made the cover, shroud for the fans. The 4 holes in the middle use the GPU cover screws to attach to the…
Instead of printing in one piece, it's faster and requires no support. This way, you can print them separately and glue them together. They are printed for visual purposes only and serve no purpose. They can be printed in any color you…
This a 3d model is of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). This model took me a bit of time to put out,…
Thank you @Nessuno0505_6893 for uploading the Fusion file as well - this makes remixing so much easier and is the main reason I chose this design. The 3mf also includes the nut for locking the holder designed by @TheRedR0cket2_273136…
The model is designed for 90mm fans. It also lacks holes for mounting a graphics card (you'll need to drill your own). You can see examples of what it looks like in the preview.
The fans on my RTX 3060 Ti just broke out of nowhere — one of those misfortunes that happen without warning and at the worst possible time. To make matters worse, they refused me the warranty, leaving me with a working graphics card...…
One of the fans on my graphics card gave out, so I set out to design a custom shroud that can hold 120 mm Noctua Chromax Black fans, and it should work just as well with 120 mm Be Quiet fans. The shroud mounts directly onto the cooler…
Printed label for GPU support. Can be printed on any 3D printer by changing the filament on the appropriate layer. It is best to use a 0.2 mm layer and change the color to white 4 layers before the end of printing and to green 2 layers…
Printed with PETG but PLA should work as well. Perimeter: 5 Infill: 20% Supports: None
Finally after several trial and error, I managed to create the GPU travel kit for my GPU, which is: Inno3D RTX 5080 X3 OC (the one with vapor chamber) the 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
This is a High detail version of my previous 3d model of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). Over the past 4…
special thanks for RejZoR for inspiration I encountered high temperatures on my 3080ti GamePro even after replacing the paste and thermal pads. I found a RejZoR solution for mounting three 92x92x25mm fans instead of the standard ones.…
It's just the travel kit FormD makes but for my GPU, here's the original: https://formdt1.com/products/t1-gpu-travel-kit
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
Hey, someone on instagram wanted a mount for his loud GPU Print the brackets with support on the small overhang, see the photos. Each model needs support to make the mounts interlock. Here are 2 versions, one for Asus Prime 5060 Ti 16GB…
ASUS Dual RTX 2070 SUPER Deshroud Mod (2x 120mm Fans) A simple deshroud mod to swap the stock ASUS Dual 2070 Super fans for two 120mm fans. Way quieter, much better temps, totally custom. Description Designed this for my ASUS Dual RTX…
Bracket for mounting RTX 5060 LP in K29 Case in Flex ATX Slot. Designed to be used with Linkup riser on 3mm standoffs. Is my first work in blender, the ports might not be perfectly aligned.
The arm for the original/parent model did not allow the tool to align properly. This version has the screw thread rotated 100º so that the switches are top centred.
I designed a second mount for my MSI RTX 5060 Ti. A friend told me that this is necessary for long GPUs to have a second mount, because the leverage force can put the VRAM in bad condition. Anyway, it’s specifically made for the MSI…
This extra cooler is designed to more effectively cool the RTX A2000 (6GB to 20GB). With the original cooler off, it reaches 80°C or 176°F; with this extra cooler alone, it reaches 50°C or 122°F. || cooler extra para refrigerar de maniera…
I built a custom fan adapter for the RTX 8000 to support a radial blower fan. It’s designed specifically for the BFB1012 size, which is a powerful blower often used for efficient, directed cooling. It sits press fit without the need of…
Fan controll with PWM GPU Fan Adapter. The holes are for the Fan are for m3 heatinserts
I didn't like the bare metal and screw holes at the end side of my Gigabyte RTX 4070 OC so i designed this thing that covers that and pushes more air from the front fans to the underside of the GPU, it uses the M3 screw holes on the gpu…
![Gundam: The Origin — RTX-65 GunTank Early Type (HG Scale) [PROTOTYPE]](https://media.printables.com/media/prints/1478342/images/11139477_88bbfdff-203f-4b0c-9676-f49c095d6316_ee836a15-7cdc-467b-a6e5-67bfeaaf146d/large_display_img_0484_1478342.jpeg)
