Deshroud RTX 4080 Deshroud 120mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deshroud 120mm for my Gigabyte RTX 4080 OC
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
This is a Deshroud mod for my Gigabyte RTX 4080 OC. It makes the GPU 4 PCIe slots tall, but it’s now quieter than the coil whine of my CPU.
The mod reuses all the original shroud screws except one. For that one, you can either skip it or use a slightly longer screw (I didn’t use any).
I recommend using rubber mounts for the fans to reduce vibration, especially if your fans don’t already have them (like the Arctic ones). I made the bracket a bit thicker to keep the fans in line with Noctua’s recommendations for radiator clearance (about 5 mm), which helps reduce noise.
The fans are connected directly to the motherboard, since the card’s built-in fan controller won’t go below 30%. I use the program Fan Control (highly recommended if you want full control over your fans). You can bind the fan connector to a custom curve using GPU temperature as the input.
Rubber mount – not an affiliated link
Support me: Always appreciated, never required.
https://ko-fi.com/tonedreams