Liczymy pasujące modele…
Tired of your GPU sagging miserably? If so here is a solution I came up with. My dad is a big Asus fan and when we built a new PC recently (which I posted on PCpartpicker HERE ) we noticed that the graphics card was sagging a lot. So I…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
I have constructed an adjustable graphics card holder. Adjustable graphics card holder for stable support of GPUs in various sizes. Easy to adjust and install, it prevents sagging and ensures a secure fit inside the case.
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Since all of the feet I could find were for the dGPU version I quickly modeled one for iGPU, because I couldn't get proper airflow when using on bed. Now it works perfect.
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
Magpul Rail cover type 2 made in Fusion 360. This works just like the real thing, insert the base into an m-lok slot on your handguard, click in the "locktab" and its done. No extra's needed, only 3D printed parts. And best of all, when…
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case. Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may…
3D Printed GPU Sag Support for Nvidia and Radeon Graphics cards. GPU sag is no longer a problem with the 3D Printed GPU Sag Support. the model is easy to print, no support is needed, and the model is designed to save printing pop and…
This support for large graphics cards is the perfect solution for users looking for a safe and efficient way to keep their GPUs in place. Its extendable design allows it to adapt to different card sizes, from 52mm up to 72mm. Fits on any…
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
They slide-on easy and don't fall off, even if you pick up the laptop/move it around. Be sure to de-burr the edges to reduce friction. Note: Only works on the Framework 16 w/Graphics Module
Nvidia GPU support 70-120mm I inspired by https://allegro.cz/produkt/podpera-graficke-karty-nvidia-drzak-s-nastavitelnou-vyskou-70-125-mm-f25e6b5e-8f1d-4374-93cb-ffe712564d66?offerId=17501680800 Assembly: insert nvidia logo to main body…
GPU Holder NVIDIA / RADEON This universal GPU holder, designed for NVIDIA and RADEON graphics cards, is a practical accessory for every PC builder who wants to protect their components from sagging or damage caused by the card’s own…
Last year I modified my laptop to support an external graphics card using the EXP GDC Beast (v8.3 in my case) adapter, allowing me to play relatively modern games when away from my main rig. Rather than have the card exposed, I designed…
GPU Support Bracket designed to look like the Dr Who 10th Doctors Sonic Screw Driver. 100% Scale goes from 75mm to ~104mm 134.16% Scale goes from 100mm to 140mm 3D PRINTING SETTINGS .2mm Layer Height Arachne Walls 25% infill, Gyroid Tree…
If you're sitting with the laptop on a comfy frizzy blanket you might be worried that it will inhale some of the fibers or that its air intake gets blocked. Likewise, when you have the laptop directly on your lap, you might feel your legs…
Habe eine stütze im ROG-design, für eine RTX 4090 konstruiert da die Originale mir nicht gefallen hat. Diese ist auf einen Lüfter mit 120mm Ø aufschraubbar um ein eventuelles wandern der stütze zu Verhindern.
2020 Tslot Gpu Bracket / Stand for Computer Test bench All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thanks
MAXIMUM HEIGHT : 110 MM MINIMUM HEIGHT : 70 MM IT IS COMPATIBLE WITH RGB THANKS TO THE GAPS IN ITS INTERNAL STRUCTURE THERE ARE 3 TYPES OF COVERS. THANKS TO 3 CLIPS, THE COVER CAN BE EASILY REMOVED AND A NEW COVER CAN BE INSTALLED, IN…
I wanted better temps for my system so i modded a duct for fresh air intake and a mount for 2x 120mm fans in the bottom. For the 2x 120mm Fan shoud in the bottom you need to cut out some parts that are in the way and also need to remove…
This is a remix of FilterRing which is somewhat a remix from Nevermore Voron filter. All credits go to https://github.com/songcq/FilterRing https://github.com/nevermore3d/Nevermore_Micro#sourcing-the-proper-acid-free-carbon : Do not, I…
Overview This is a custom, compact 3D-printable testbench designed specifically for the Micro PCIe SlimSAS 8654 eGPU setup. It provides a secure, organized, and open-air frame to mount your external graphics card, SlimSAS adapter board,…
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
This bracket supports the GPU by bolting to the back of the GPU and the bottom of the NR200 case. I designed the bracket for my RX6800 reference, but I think it should also work for the RX6800XT, RX6900 and RX6950XT as they seem to have…
If your GPU is heavier, the Frame is hanging down. This Print solve the Problem.
Since I have a few open air 12x gpu mining rigs, I figured out a cheap and easy way to stack them. So If you have these open frame cases and are looking to stack them. They're thick and 60mm tall and are designed to rest on top and bottom…
Holds one 18650 battery and is compatible with Magpul MOE pistol grips. The plug fits into the recess inside the tube to retain the battery when the core is removed. Tested over 200 times (I got bored). Print the core in PET-CF (PET-GF…
Introducing The Arcane Pylon, this mysterious pillar is a support for heavy, high-perfomance GPUs. This three-part stand is adjustable in the range from 90-130mm and is completely universal. Its stability is guaranteed by the wide base…
Convert your standard UTG .223 Remington magazine to a legal 10-round capacity quickly, cleanly, and reliably! Designed specifically to fit internal magazine geometry smoothly, this 3D-printable capacity limiter block sits directly at the…
My Akitio Thunder 2 eGPU setup with the MSI AERO GTX1060 6GB graphics card and dual Noctua 60mm fans was still getting warm during gaming even after a little bit of case modding. I noticed the stock perforated cover on the Akitio Thunder…
First: This is not my work, this is the work of the amazing Mangomoose, the the guy who made Big Mac (if you've been to Open Sauce 2024 or VCF West 2024, you know what I'm talking about. It's a really, really big Mac Plus made out of 3D…
A personal rendition of an existing Framework 16 iGPU stand! This version I've made a bit taller for my use case, which was having the Framework 16 at an acceptable ergonomic height relative to my desk height. This version of the stand is…
The Design / A Tervezés: This bracket uses a strong threaded mechanism, allowing you to easily adjust its height anywhere from 50mm to 110mm to perfectly support your heavy GPU. The internal threads are designed with a clearance tolerance…
I was in dire need of GPU holder for my new PC so i made this thing.
This is a Modular Bottom Plate as well as increased Optic for the Magpul PMAG 10 AK Gen2 that visually increases the 10 round Mag into a longer looking Magazine (for style points). Assembly: Insert 2 M3 Heat set inserts into the modular…
Created this model of the Framework GPU Interposer module for another project I'm working on.
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
I designed and 3D-printed a custom fan mount for the Tesla P40 GPU, addressing its passive cooling limitations. The mount securely attaches to the GPU, allowing for the installation of an active cooling fan to improve airflow directly…
First: This is not my work, this is the work of the amazing Mangomoose, the the guy who made Big Mac (if you've been to Open Sauce 2024 or VCF West 2024, you know what I'm talking about. It's a really, really big Mac Plus made out of 3D…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
This is a flush insert adaptor for the Magpul Type 1 QD socket: https://magpul.com/sling-mount-kit-type-1.html?mp_global_color=118 This design should work for any hollow core stock, if you have access to the inside. For reference, I am…
🖥 Vertical GPU Mount – Optimized & Reinforced Version This is an improved remix of the original model, redesigned to provide greater strength, better usability, and a smoother printing experience. All modifications were made with…
My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…
I re-made it implementing the following changes: Fixed split in stand (mentioned a few times in original design's comments); Made lock nut sligtly bigger and added notches; Adjusted thread tolerance so it is not too lose now; Added…
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
I couldnt find a GPU support i was happy with, so i made this one. Adjustable 60-90mm No support needed. Threads should run smooth right out of the printer.
Vertical GPU mounts for Corsair 6500X Check out my other custom mounts. Currently works with Corsair riser cables, HYT
Tested with Nvidia Quadro RTX4000 in Dell Precision T5820. Print with a stiff and temperature resistant material like PC, PET-CF or PPA-CF. PA6 or PAHT will creep. Ribbed version for heavy GPUs.
Meet an ultra-compact, intelligently engineered Micro-ATX PC case designed to push the limits of small-form-factor computing. This 3D-printed case is built for creators, gamers, and PC enthusiasts who want maximum performance in the…
Finally after several trial and error, I managed to create the GPU travel kit for my GPU, which is: Inno3D RTX 5080 X3 OC (the one with vapor chamber) the 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's…
Radeon GPU support 70-120mm I inspired by https://allegro.cz/produkt/podpera-graficke-karty-nvidia-drzak-s-nastavitelnou-vyskou-70-125-mm-f25e6b5e-8f1d-4374-93cb-ffe712564d66?offerId=17501680800 Assembly: insert nvidia logo to main body…
Nvidia GPU support 70-120mm I inspired by https://allegro.cz/produkt/podpera-graficke-karty-nvidia-drzak-s-nastavitelnou-vyskou-70-125-mm-f25e6b5e-8f1d-4374-93cb-ffe712564d66?offerId=17501680800 Assembly: insert nvidia logo to main body…
SInce VW doesn't sell them anymore, we have to get quite creative to keep our busses alive. So here's an attempt to get the rubber buffer for the Y-Pipe, which is starting to fall off or missing over time. Print in TPU. Installation maybe…
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
This model is a specific way to support a GPU bracket on the NZXT H6 Flow, which has fans mounted directly under the GPU - making it very difficult to mount a regular GPU support bracket. The idea for this design is simple - loosely mount…
I added the option of mounting a screw.
the screen is 3.5 Inch IPS Type C Secondary Screen for Computer CPU GPU RAM HDD Display 320*480 USB LCD Monitor Freely AIDA64 Windows 10 11 from Aliexpress
I went down the rabbit hole of GPU supports, and found this video that describes the real problem with GPU sag- TLDR - the problem with GPU sag is that the PCB board develops a twist over time, and the solder joints between the GPU and…
I was annoyed at the hot air from my eGPU blasting out to the right, when I was gaming. This stand holds the eGPU so the hot air is sent upwards. It does not improve or worsens the thermal performance. But it saves space. I also made a…
When modding Dell Optiplex 7020, there is not enough clearance to "bend" PCIE cables with larger GPUs. This mod provides 10mm extra clearance and little extra ventilation for fitting larger GPUs into an Optiplex. Comes with two parts, the…
Bonjour, voici un support que j'ai conçu pour assurer une bonne fixation de ma carte graphique MSI 4070 Super Ventus 3x dans mon boitier Pure Base 600 de chez BeQuiet Utilisation de : 3 Vis à tête fraisé de M3x8mm coté carte graphique 2…
[TDM-01] Thermal Discouragement Mesh (Un)official Aperture Science Hardware Housing The TDM-01 is a 5-litre sub-compact enclosure designed for test subjects who value high-density computation and superior airflow over traditional "safety…
A support structure that uses M3 screws and nuts to hold up sagging graphic cards. It offers optional screw posts on its base for computers that are frequently on the move. ℹ Parts marked "Holes" should be negated! Do not use EasyPrint to…
Aorus inspired GPU support. Fusion360 file included to adjust to your needs. Has room in the base for small magnets. 2.5mm x 9.5mm to keep is secured to the bottom of the case. Fusion360 file included so you can adjust to your desired…
a cover for 12VHPWR GPU cable no supports needed I printed it in PLA
Introducing The Arcane Pylon, this mysterious pillar is a support for heavy, high-perfomance GPUs. This three-part stand is adjustable in the range from 90-130mm and is completely universal. Its stability is guaranteed by the wide base…
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
Overview This file is for the ITG Cube , a custom 3D-printed enclosure that turns your Mini PC into a powerful gaming station. It features a dedicated docking slot designed for the Aoostar GEM12 (or any Mini PC up to 13x13x7cm) and a…
This is a Modular Bottom Plate as well as increased Optic for the Magpul PMAG 10 AK Gen2 that visually increases the 10 round Mag into a longer looking Magazine (for style points). Assembly: Insert 2 M3 Heat set inserts into the modular…
This is an eGPU base based on the ADT-Link UT3G eGPU board, allowing you to connect a desktop GPU to any device with a USB4 or Thunderbolt connection. Useful for 3D scanning with smaller laptops, video games and whatnot and makes the…
Adjustable GPU Support for heavy Graphics Cards. 8 cm completely screwed and 12 cm completely unscrewed. You can glue a magnet into the underside to prevent it from slipping.
This is made specifically for the Sparke A310 but should work for other single slot GPUs with this fan mod
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
An Apollo Program inspired graphics card support. Fits Lego figures (see pics). (Yes, I know the orbiter didn't land on the moon and certainly didn't have landing gear, but dude, chill out, we're just having fun) Also has a 5mm port if…
List of parts: 2 92x25mm fans cable adapter PH2.0 to 2x 4pin 10 M5 fan screws 4 M3 screws 4 M3*4*(4,5-5) heat-insert nuts 2026-04-26: Update model and add sources (Kompas 3D)…
A TPU mag puller for AR15 magazines. Available in two versions, one for STANAG magazines, and one for Gen2 & Gen3 Pmags. Also includes modifier files to add fuzzy skin texture in certain areas. The included 3MF files use very slow print…
Remix of the Mount from B20bob. Wanted the graphics cards to be slightly tilted. You will need none, one or two M4 screws and nuts depending on the size of your GPU. My little Quadro has none, the other both are secured with one screw and…
I just print it in the orientation of the STL with supports and 10% infill
So basicly i took insparation bec i have real magpulls for mp5 mags and i really wanted for my scorpion evo buti couldnt find none plus the ones of the mag plates i really hated those i wanted to be like magpull for mp5 this is printed in…
Design Concept This model is designed to provide a simple and effective way to prevent GPU sag, thereby extending the lifespan of the graphics card. The screw mechanism allows for precise height adjustment, enabling the bracket to better…
I designed a second mount for my MSI RTX 5060 Ti. A friend told me that this is necessary for long GPUs to have a second mount, because the leverage force can put the VRAM in bad condition. Anyway, it’s specifically made for the MSI…
🦾 CyberClaw GPU Bracket | Anti-Sag System Stop the sag. Upgrade your build. Today's massive graphics cards demand massive support. The CyberClaw is designed from the ground up to be the ultimate fusion of industrial "Cyberpunk" aesthetics…
Introducing FARCT - a Fan ARC Thingy For Sparkle ARC A310 and A380 (heatsink swap) You'll need to remove the heat sink one time get the stock shroud off - replacing thermal paste is recommended. Your new shroud can be installed and…
Description Give your setup both style and stability with this custom-designed GPU support figure. This model features the Fitzz Energy character , a strong and determined figure holding up your graphics card – combining functionality…
Intended to be a Slip-Fit adapter for both the fan housing and GPU sleeve. You will need to make modifications based on the model of GPU and type of 40mm fan. Suggested modifications are access to GPU Power, resizing GPU and Fan…
This is a remix of nessuno0505's thing but I modified it to hold two small 6x3 round magnets because I didn't have the magnets he used. I also added a small hole to pry the magnets out of the print with a paperclip or a toothpick.
This fan, https://www.printables.com/model/299994-xj99c-noctua-nf-a12x25-mod is probably a better all round fan unless you need more flow at higher backpressure. Recommend 0.15-0.2mm layers, any filament, probably need support. Putting…
Demat, I had the idea of exhibiting some old GPUs to start my collection. I couldn't find a GPU support that I like so I designed one without a support to make printing easier. Here is my single slot version and one “special edition” for…
I used 1.01 flow rate for good results 04 Nozzle @ 15% Gyroid Infill 4 Top shell layers Use Textured Plate Face Down Printed with a Bambu X1C with AMS and Bambu Filament
This version of the Oculink eGPU Enclosure has been slightly modified compared to the one in the picture, reducing the number of screws needed for assembly. Easy to Print Without Supports: The Oculink eGPU Enclosure has been optimized for…
I liked the idea of a spare CR2032 battery for my Red Dot Sight stored in my AR15 handle so when I switched to Magpul MOE+ I printed an insert to hold one. I made sure both the bottom cap and the bottom and back of the print was smooth…
![GPU SUPPORT [COMPATIBLE WITH RGB] MSI, ROG, NVIDIA](https://media.printables.com/media/prints/1141222/images/8609841_976d6468-70aa-48f4-8324-066374f09ed2_14816a93-907b-485a-a0f7-a9f5e43d6d8f/img-20241214-wa0006.jpg)
![[TDM-01] Portal inspired 5L PC case: internal power supply and low profile GPU](https://media.printables.com/media/prints/96a8140d-9ff0-4fc4-94ee-ca18b53865cb/images/11977585_ddbec7f7-3cf3-402a-83a1-a663a8d1c518_7d95ddf5-ad56-4b88-9573-68c13c00143e/dsc00715.jpg)
