1 / 1
Lid w/ GPU & PSU Cutout For PACSGear by Hyland MDR Video Touch Computer — zdjęcie 1

Lid w/ GPU & PSU Cutout For PACSGear by Hyland MDR Video Touch Computer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lid w/ GPU & PSU Cutout For PACSGear by Hyland MDR Video Touch Computer

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
502
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

From my video: 


Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The brace bar is not required but adds a tiny bit of stability. Assemble using M3 threaded inserts and screws. Check the video if you need a better look at how it goes together.

This is the cooler I used. I wouldn't exactly recommend it since it's just the first one I tried and it might be crap, but it's at least guaranteed to fit with this lid: https://www.amazon.com/dp/B0CY274JWV

Tagi