Lid w/ GPU & PSU Cutout For PACSGear by Hyland MDR Video Touch Computer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lid w/ GPU & PSU Cutout For PACSGear by Hyland MDR Video Touch Computer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
From my video:
Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The brace bar is not required but adds a tiny bit of stability. Assemble using M3 threaded inserts and screws. Check the video if you need a better look at how it goes together.
This is the cooler I used. I wouldn't exactly recommend it since it's just the first one I tried and it might be crap, but it's at least guaranteed to fit with this lid: https://www.amazon.com/dp/B0CY274JWV
