OCULINK EGPU ENCLOSURE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version of the Oculink eGPU Enclosure has been slightly modified compared to the one in the picture, reducing the…
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 404
- Wydruki
- 0
- Wyświetlenia
- 7326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This version of the Oculink eGPU Enclosure has been slightly modified compared to the one in the picture, reducing the number of screws needed for assembly.
Easy to Print Without Supports: The Oculink eGPU Enclosure has been optimized for 3D printing without the need for supports. This means you don't have to worry about additional supporting elements, making the entire printing process hassle-free.
Excellent Ventilation thanks to the honeycomb infill, the enclosure boasts exceptional ventilation while minimizing material consumption. This efficient filament usage supports improved airflow.
Low Material Consumption: The Oculink eGPU Enclosure utilizes approximately 400g of filament, with a margin of ±20g, making it an economical solution without compromising on durability and functionality.
What's Needed:
25 M3 screws, including 10x16mm, 7x8mm, 2x25mm, 6x12mm
10 M3 nuts
Screwdriver
GPU up to 230mm I used ASRock Radeon RX 6500 XT Phantom Gaming D
TFX power supply I used Forton 250w 175x65.2x85mm
Oculink SFF-8612 SFF-8611 board
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Infill:
20%
Filament:
Pearl Bronze
Notes:
Layer Height: 0.28 mm
Perimeters: 5
Top Layer: 0
Bottom Layer: 0
Infill Density: 20%
Infill Pattern: Honeycomb
Infill Angle: 90 degrees
No Supports
Extrusion Width: 0.6 mm
Panels Oriented Flat to the Bed
Feel free to adjust these settings according to your specific requirements and preferences. Happy printing!
Category: Computer