GPU Anti-sag Holder for RTX 4070 Gigabyte / NZXT H9 Flow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GeForce RTX4070 GAMING OC 12G Anti-sag holder for NZXT H9 FLOW/Elite case to prevent pcb cracking issues.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 215
- Wydruki
- 2
- Wyświetlenia
- 5244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported.
Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density.
You'll need two M3x5mm screws (minimum length) and one 6-32x5mm screw (maximum length) for the top part, to be screwed in from the rear of the case (invisible screw).
I assume this is compatible with all Gigabyte graphics cards of the same size: L=300 W=130 H=57.6 mm
Update v2 : minor ajustements and new design.
Support pour carte graphique RTX 4070 Gaming OC Gigabyte pour éviter de casser le pcb avec le poids, surtout lors d'un transport éventuel du PC
Imprimé sur une X1C Bambu lab sans support en 0.20, 3 parois, densité 25% Gyroide.
Il faut utiliser 2 vis M3x5mm(longueur minimum) et une vis 6-32x5mm(longueur maximum) pour la partie haute à visser par l'arrière du boitier (vis invisible).
Je suppose que cela doit être compatible avec toutes les cartes graphiques Gigabyte de même taille : L=300 W=130 H=57.6 mm
Mise à jour v2 : ajustements mineurs et nouveau design.