P
Printablesmweisshaupt
NZXT Phantom 410 power button
This is a replacement power button for the NZXT Phantom 410 case.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 185
- Polubienia
- 1
- Ocena
- 0
Wyniki wyszukiwania: nzxt
Liczymy pasujące modele…
P
PrintablesJammyJellyfish
NZXT Phantom 410 replacement buttons
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCuriousding
NZXT H510 for RaspberryPi
RaspberryPi case that looks like the NZXT H510. Use a small piece of plexiglass or clear plastic for the side panel. Compatible with some heat pipe with fan coolers out there. Use a 16mm Pushbutton switch for the power button.
- Pobrania
- 57
- Polubienia
- 33
- Ocena
- 0
P
PrintablesCojawright
NZXT Mini Custom PC
This is a mini-computer model that harnesses all of the basic ideas of building a Pc. This can be used for teaching purposes or simply for enjoyment. This model helps you enjoy creating a pc without any of the little details or the cable…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThroughmyeye
NZXT H510 Power Light Diffuser
Power Light Diffuser to cut the glare on NZXT 510 PC Case and may fit others, I got tired of the glare and flickering of the power button led as it blinks with drive activity. Orientation should be automatic with 4 top/bottom and 2 walls,…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
Printables
NZXT S340 replacement foot
I bought an NZXT S340 with a missing foot so measured the length, width, and height of one of the remaining feet and made this model. It doesn't look like the original but functions similarly. I printed it in basic black PLA but if you…
P
Printables
NZXT OpenFlow V2 (H510 Elite conversion)
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
P
Printables
NZXT H510 Elite Custom Front Pannel (Project Openflow)
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
P
Printables
NZXT Phantom 410 replacement buttons
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
P
Printables
NZXT RGB & Fan Controller adapter
The Smart Device V2 comes preinstalled with the NZXT H510i and some other cases as well. The new NZXT RGB & Fan Controller doesn't have the same dimensions. It comes with magnets and Velcro to mount it in the case, however I didn't like…
P
Printables
NZXT H1 Fan Bracket
I wanted a bracket so I could mount fans in the back of my NZXT H1 case without them being visible while still being able to use the exiting back panel. Since I couldn't find anything quite what I wanted I designed my own. This should…
P
Printables
NZXT H1 Font/Back panel spacer
Update: *2021-01-09 : Added 10mm, 25mm, and 29mm spacers with a different socket configuration (labeled mk II). This new configuration might work better depending on your printer tolerances. The 29mm spacer gives more room for fans on the…
P
Printables
NZXT Puck Hook
A low-profile hook that press-fits into an NZXT Puck (magnetic cable management device) for hanging IEMs or other smaller items. Printed in ~25 min with 12% infill. You could boost your holding force with a magnet in the base, but it…
P
Printables
NZXT S340 PC Case Headphone Hook
This headphone hook sits on the front panel. It doesn't conflict with the front panel filter. Print as is. No need for supports. Perimeter: 2 Layer Height: 0.2mm
P
Printables
NZXT H1 v1 front grill
Front grill for NZXT H1 V1. I'm not sure about V2. Set top 0, bottom 0 layer and chose the infill patten you like for the grill. You can print them all at once or print separately like mine and stick them together using superglue. Double…
P
Printables
NZXT H510 Front Bay Hard Drive Mounting Bracket
Gaze not too long into the void, for you will inevitably think to yourself: “Man…I could fit another couple terabytes in there.” To remove the NZXT's front frame, you may have to use a pair of needlenose pliers to flatten the tabs on the…
P
Printables
NZXT S340 Cover
Cover for the grafics card calbe hole of a NZXT S340. With and without the p. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Computer
P
Printables
NZXT H1 Triple & Dual 40mm Exhaust Fans Shrouds
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
P
Printables
NZXT H1 LCD Mod (PSU Replacement Cover)
Inspired by some of the LCD mods on Reddit/SFFPC for the NZXT, I gave this LCD mod a crack and it worked out pretty well. You need the 3 prints.. one's the back plate, and two brackets to hold the screen in place. The screen i used was…
P
Printables
NZXT H1 PSU Replacement Cover
Simple really, this is a straight replacement model for the existing PSU Cover. Mod to your delight. Fusion 360 model included. Drop me a comment or a rating if you like this!
P
Printables
NZXT Kraken X60 AM4-Adapter
NZXT Kraken X60 AM4-Adapter To use the old watercooling AIO, I had to design a bracket to mount it to an AM4-socket. The original backplate and screws are reused. Use a 7mm drill to widen up the holes until you get a snug fit. printed in…
P
Printables
NZXT 510 - Raspberry Pi 3 Case
Remix of a NZXT 510 Case for Raspberry Pi 3 Model B. Changes only to the outside part. I printed mine in PETG but PLA is probably fine too. Use brim. Optional rubber feet, print in TPU. Currently working on a fully own NZXT 510 case for…
P
Printables
CatGuard for NZXT H710i
"CatGuard" - Because Your PC Deserves Peace! Tired of your cat accidentally shutting down your PC? Is your fluffy friend turning your gaming rig into their cozy winter throne, only to wreak havoc by pressing that oh-so-conveniently-placed…
P
Printables
Replacement ear pads for NZXT Relay headset.
Replacement ear pads for NZXT Relay headset. Frame is the STL, shown with half-covered replacement pad. Replacement cushion for example at Aliexpress https://de.aliexpress.com/item/4000577555269.html Diameter 85mm is required.
P
Printables
NZXT H1 V2 Fan Controller "Door" Clip
Over time the original injection molded plastic clip just got brittle and fell apart. After a quick search I saw there was no replacement readily available to print, so I made one. Printed in PETG on a 45° angle for additional strength.…
P
Printables
NZXT H700 GPU Support Bracket
Inspired by this GPU support but the designs are so different I didn't end up calling this a remix. This is a GPU support bracket for an NZXT H700i or NZXT H700 case. It fits my GTX 1080ti Founders Edition, which means it should also fit…
P
Printables
NZXT H7 Flow (2024) Cable Shroud
This piece replaces the original cable shroud cover in the NZXT H7 Flow (2024) for better clearance. All screw and hardware mounts are the exact dimensions of the original. Print in 2 pieces A+B are needed, also comes with an extended…
P
Printables
NZXT H440 PSU Bracket
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
P
Printables
GPU Anti-sag Holder for Gigabyte GeForce RTX 4070 AERO OC - NZXT H7 Flow / Elite (2022)
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
P
Printables
NZXT Signal HD 60 Mount
NZXT Signal HD 60 Mount. I used 2 Large command strips to mount it under my desk. No supports needed. I used PLA, but i'm sure just about any material is fine.
P
Printables
NZXT Case SSD Rails
SSD Bracket to add more hard drives to a NZXT M59 Case. You will need to print x2 Brackets and 4 screws per SSD/HDD. The locking tabs don't quite lock in 100% but it fits perfectly and snugly fits a typical SSD/HDD in the bracket. Print…
P
Printables
NZXT Kraken Tube Comb Sleek
A sleek version of Daymo's NZXT Kraken Cable Comb (3580218). Slimmed it and added chamfers, designed with 0 tolerance sand/file/scale tongue to fit. at some point I'll return and mark it as an actual remix once thingiverse works again.…
P
Printables
GPU Foot Bracket for NZXT GPU-Riser x Lian Li O11 Vision Compact
A foot bracket for NZXT's GPU Riser to make the GPU level w/o touching the Lian Li O11 Vision Compact case's bottom mesh. The foot that the vertical riser comes with would push right down into the mesh tray at the bottom of the case. This…
P
Printables
NZXT H9 GPU Stand
A GPU anti-sag supporting stand for the NZXT H9 Flow case. Designed for the Asus ROG Strix RTX 4080 specifically, bit will probably work for any GPU with height of ~70mm and a width of ~150mm. Dimensions of the drawing are in millimeters.…
P
Printables
NZXT H5 Flow PCIE Plate
The arrows are for orientation, it goes on the inside of the case. Iron for a nicer look.
P
Printables
IKEA SKADIS front panel for NZXT S340
An IKEA SKADIS compatible board for the NZXT S340 PC case. 3 parts to print, unless you can do the full model on a really big printer.
P
Printables
Plastic Washer for NZXT AIO
This is a replacement for the plastic washer that NZXT never gives you enough. I printed with 100% infill for strength since it does get a lot of pressure.
P
Printables
NZXT Phantom 820 Port Cover
The rubber USB port cover (flap) on the top of my NZXT Phantom 820 was starting to disintegrate and I've always found it boring/ugly. This is a replacement that sits slightly recessed into the case. The clear TPU looks pretty nice and…
P
Printables
NZXT S340 Eliet Front Panel
This custom remix was created with the goal of improving cooling performance for my PC without needing to overhaul my case or break the bank . My cooling setup was already decent, but I wanted something more efficient. After searching for…
P
Printables
NZXT Kraken X61 AM4 bracket
NZXT Kraken X61 AM4 bracket. 3D printed and working well for me.
P
Printables
NZXT H440 Dual HDD/SSD Tray
I wanted to add more drives to my NAS but keep using my old cast-off H440 case. Since the drives mounts are spread far enough apart in the original design it's actually possible to fit two 3.5" drives in 4 of the 5 original mounting…
P
Printables
NZXT H9 Flow (2023) side fan duct
Remix of Supahobnobba's O11D XL fan duct to fit the NZXT H9 Flow 2023 side fans, simply changed Z height and enlarged screw holes for easier mounting
P
Printables
NZXT S340 replacement foot
I bought an NZXT S340 with a missing foot so measured the length, width, and height of one of the remaining feet and made this model. It doesn't look like the original but functions similarly. I printed it in basic black PLA but if you…
P
Printables
NZXT OpenFlow V2 (H510 Elite conversion)
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
P
Printables
NZXT S340 GPU Cable Pass Through
NZXT S340 Case Cable Passthrough for GPU wire from case basement Category: Electronics
P
Printables
NZXT H210 Dual HDD Bracket
I recently built a computer in an NZXT H210 mITX case and it has a spot for a single 3.5" HDD on the bottom. The room in the case allows for another 3.5" HDD on top of it without any clearance issues. I would imagine this would work in…
P
Printables
NZXT H1 Fan Grill
Replacement fan grill for NZXT H1 radiator fan or really any 140mm fan. Just in case you accidentally send yours back to NZXT during RMA.
P
Printables
NZXT H510 - SidePanel with 120mm holes
This replacement side panel is designed for the NZXT H510 PC case and makes it easy to mount standard 120 mm fans directly to the panel. The mounting holes are spaced to match the standard 120 mm fan pattern for a proper fit. Two versions…
P
Printables
NZXT H1 v1 - 2.5" SSD + 3.5" HDD bracket mount drive tray
I designed this bracket to be able to install a 3.5" HDD drive in addition to one 2.5" SSD into my NZXT H1 v1 PC case. Just remove the original 2x SSD bracket and use my bracket instead. You will need some 90° angeled SATA connectors to…
P
Printables
Magnetic Headphone Holder - For NZXT H510 PC Case
A two-part headphones/headset holder designed around the NZXT H510 PC case, although this part will work with similar cases that have 25 mm tall feet. Only requires one 20 mm countersunk magnet, unlike my other design. The holder tucks…
P
Printables
Graphics card holder (NZXT Case + ASUS GTX1080TI)
Hey guys, this is my very first thing I created on my own. I hate it when my graphics card bend to the bottom because its too heavy. So I created this graphics card holder to hold it right in the way. This holder ist designed for the NZXT…
P
Printables
NZXT H1 v2 Rear Panel Fan Mod
Comes in 4 pieces, split STL to objects in prusa slicer. There's a 0.5mm gap between parts; mask back panel, snap pieces into back panel, and fill gaps w/ JB-Weld or similar. This is to allow everything to fit on the bed and account for…
P
Printables
GPU support / gtx1060 in NZXT s340 elite
i print it for my gtx 1060 i have i nzxt case and it fits nicely with loop for zip ties Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: yes 10% optional Filament: 3d jake…
P
Printables
NZXT Keycaps
There are two versions. With and without LED lighting. For all common keyboard switches
P
Printables
EK Pump Holder for NZXT Cases
This adaptor plate allows you to mount an EK-Quantum Kinetic TBE 200 D5 (or similar) PC Water Cooling pump to the removable bar of NZXT's cases that have the vertical cable management bar. As seen in the picture, this allows the pump/res…
P
Printables
NZXT H200 Front panel
The magnets used are 6mm X 1mm Printed face down and superglue together I have added the f3d,step and 3mf files Hope it helps
P
Printables
Alphacool Eisstation NZXT Case mount
Similar to my EKWB pump / res combo holder: https://www.printables.com/model/291904-ek-pump-holder-for-nzxt-cases This mounts the Alphacool Eisstation to the vertical bar inside NZXT's PC cases.
P
Printables
Nzxt H510 Elite Wall Mount
This is a wall mount for NZXT H510 Elite, but I think it will fit other NZXT cases to. Mount is 215 mm wide. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.24 Infill: 40+ Filament: 3de PLA Max…
P
Printables
NZXT H-series foot
Foot for NZXT H-series case. Has recess for existing rubber mat. Modelled in Fusion360. Prints without supports.
P
Printables
NZXT Kraken X42/X52/X62 to G1/4 fitting
This is a drop in replacement that allows an NZXT Kraken watercooler to be converted to a standard BSP G1/4 water cooling loop. Just swap the O-rings and screws from the original 3/8in barbfittings. Not sure how this needs to be printed,…
P
Printables
NZXT Puck Cable Manager & Headphone Hook
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
P
Printables
NZXT H510 Elite Front mesh panel
These models are not mine I just uploaded it to printables because I thought others might search for something like this. Notes from the creator: I use superglue to assemble ill add a picture so you can see where everything goes I use…
P
Printables
NZXT H1 V2 Custom - RGB Foot - 120mm Back
For my custom loop NZXT H1 V2 I designed some parts: Backpanel for 240mm Radiator + Fans Pump Bracket for EK Classic 160 Foot with Base and Diffusor
P
Printables
Headphone Holder NZXT
Made this to use with my NZXT computer case since the magnets that I was able to find weren't strong enough to hold the headphones. Created in Autodesk Inventor, added .step file if you would like to modify it.
P
Printables
Mini NZXT PC Case Figurine
Disclaimer - I am completely new to 3D printing and designing. After printing this out, I noticed a few mistakes I made in the 3D model. There is a curve and an extra line on this design. Just be aware of this before printing . At some…
P
Printables
NZXT 2.5" Tray
I needed a second tray for my NZXT 710 case but it'll probably work with other NZXT cases. I this should snap in without the need for the screw but it does have a hole for it. I would recommend screwing it down if you're using an HDD but…
P
Printables
NZXT H510 GPU SUPPORT
a support for my vertically mounted Gigabyte RTX 3080 OC, which is mounted using a cooler master V2 universal vertical GPU bracket, the holes slot into the base of the case like lego. Category: Other
P
Printables
NZXT H510 Elite Flow mod
My GPU was suffocating inside my H510 Elite, so I created a front and side panel for better airflow. Air filters coming soon.
P
Printables
NZXT H510 Fan 140mm Cover
Fan Cover for 140mm NZXT H510 computer case. It has no functionality, I made this because I didn't like the original design from case. Use the original screws from the manufacturer.
P
Printables
NZXT H440 headphone hook
I made a hook that holds my headphones that clips on the front face plate of the NZXT H440 Print instructions Category: Audio Summary I made a hook that holds my headphones that clips on the front face plate of the NZXT H440
P
Printables
NZXT H510 Feet Riser
Feet extension for NZXT H510 case. No specific print instructions required, i did mine at 100% and PETG for strength and heat resistance.
P
Printables
NZXT H400 front panel airflow mod
i designed a front panel for the NZXT H400 and H400i. It mounts on the existing bracket that hold the original metal panel to the case. You will have to cut the opening on the bracket, i used a dremel (see pic 2) PS: it's my first model…
P
Printables
NZXT H440 HDD/SSD Tray
My friend needed extra HDD/SSD trays, as his (bought used) NZXT H440 computer case only came with one. So, I measured the original and made this to fit the tray slots in the case. Fits both 2.5" and 3.5" disks. It's available in three…
P
Printables
GPU Anti-sag Holder for RTX 4070 Gigabyte / NZXT H9 Flow
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
P
Printables
NZXT H1 V2 Rear Mod
⚠ Warning ⚠ This model's lower part height is either slightly off or the print has warped during printing. If i would be doing this for the second time I would check split this into 4 parts instead of 2 and measure pin distances. Bottom…
P
Printables
NZXT H510 Vertical GPU mod
Printing recommendations Print with 0.2mm or 0.3mm layer height and at least 3 walls and 4 or 5 top and bottom layers. I recommend at least 30% infill. After printing remove the slots support wall (integrated in the design) as shown in…
P
Printables
NZXT H510 Flow PCIe Slot Cover With Patterned Variations
I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead. The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers…
P
Printables
NZXT H7 Elite Front Panel Spacer And Filter Mount
MOAR AIRFLOW FILTRATION If you Feel like you are choking your NZXT H7 Elite because you put a Toaster in your PC blowing with absolutely no Airflow, This Will Help you get Airflow and Keep Esthetics as well! This includes An Air Filter…
P
Printables
NZXT H210 Magnetic front panel
NZXT cases have a unique and clean look. But most of them, including the H210, have bad airflow with the stock front panel. This model solves this issue and will make your PC breathe a ton of fresh air ! It fit perfectly on the case just…
P
Printables
NZXT H510 Elite Custom Front Pannel (Project Openflow)
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
P
Printables
Caster foot for NZXT H7 Flow case
My computers live underneath the corner of an L-shaped desk, so I always like to replace their feet with casters to make it easier to access ports, etc. I printed these in nylon (Taulman3D Alloy 910, black) for strength/impact resistance,…
P
Printables
NZXT H1 Display Mount
Elevate your NZXT H1 V2 gaming experience with this custom-designed PSU replacement cover! This innovative 3D-printed accessory not only replaces the original PSU cover but also adds functionality and aesthetics to your build. With this…
P
Printables
Bottom Fan Adapter for NZXT H510
Moved one of the included 120mm NZXT fans from the h510 case to the bottom. Designed this adapter so it can lock into the holes at the bottom of the interior. They pressure fit into place (for removal I recommend pushing from underneath…
P
Printables
GPU Bracket for NZXT H510
Designed a GPU bracket that attaches inside the NZXT h510. It locks in behind the cable cover. This is originally designed for the Aorus Master 3070ti, a very large GPU. Feel free to remix as needed.
P
Printables
NZXT H5 Flow Hexagonal Decorations
Not sure exactly how this idea came to my mind, but hexagons look cool and I thought why not design some that click into the front of my PC case! The designs and colors you can add to the front of your PC are limited only by your…
P
Printables
NZXT Phantom Side Fan Grill Cover
Decorative plate to modify your side panel and fan grill. Custome inserts could be made for your own design too. Required Parts 9 - 6x2 magnets
