121 models
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
My GPU was suffocating inside my H510 Elite, so I created a front and side panel for better airflow. Air filters coming soon.
NZXT cases have a unique and clean look. But most of them, including the H210, have bad airflow with the stock front panel. This model solves this issue and will make your PC breathe a ton of fresh air ! It fit perfectly on the case just…
Update: *2021-01-09 : Added 10mm, 25mm, and 29mm spacers with a different socket configuration (labeled mk II). This new configuration might work better depending on your printer tolerances. The 29mm spacer gives more room for fans on the…
This is a replacement power button for the NZXT Phantom 410 case.
These models are not mine I just uploaded it to printables because I thought others might search for something like this. Notes from the creator: I use superglue to assemble ill add a picture so you can see where everything goes I use…
Moved one of the included 120mm NZXT fans from the h510 case to the bottom. Designed this adapter so it can lock into the holes at the bottom of the interior. They pressure fit into place (for removal I recommend pushing from underneath…
Just a simple logo swap from Corsair ship logo to NZXT text logo.
I recently built a computer in an NZXT H210 mITX case and it has a spot for a single 3.5" HDD on the bottom. The room in the case allows for another 3.5" HDD on top of it without any clearance issues. I would imagine this would work in…
Feet extension for NZXT H510 case. No specific print instructions required, i did mine at 100% and PETG for strength and heat resistance.
i designed a front panel for the NZXT H400 and H400i. It mounts on the existing bracket that hold the original metal panel to the case. You will have to cut the opening on the bracket, i used a dremel (see pic 2) PS: it's my first model…
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
Simple tube comb for NZXT Kraken AIO with 11 mm tube diameter.
Printing recommendations Print with 0.2mm or 0.3mm layer height and at least 3 walls and 4 or 5 top and bottom layers. I recommend at least 30% infill. After printing remove the slots support wall (integrated in the design) as shown in…
I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead. The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers…
Replacement fan grill for NZXT H1 radiator fan or really any 140mm fan. Just in case you accidentally send yours back to NZXT during RMA.
Anti sag brace for the NZXT H700/H700i
It's apapter for holding NZXT Kraken cooling system for NZXT H510 PC case when You lost or broke original holder plate Printed without supports, 0,2mm layer height, PLA probably PET-G would be better for heat resistance
Designed a GPU bracket that attaches inside the NZXT h510. It locks in behind the cable cover. This is originally designed for the Aorus Master 3070ti, a very large GPU. Feel free to remix as needed.
Gaze not too long into the void, for you will inevitably think to yourself: “Man…I could fit another couple terabytes in there.” To remove the NZXT's front frame, you may have to use a pair of needlenose pliers to flatten the tabs on the…
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
RaspberryPi case that looks like the NZXT H510. Use a small piece of plexiglass or clear plastic for the side panel. Compatible with some heat pipe with fan coolers out there. Use a 16mm Pushbutton switch for the power button.
This is a remix of another adapter for the NZXT H510 that will make it easier to mount fans on the bottom of the case for better gpu airflow. In the remix I just duplicated it and merged 2 sides together so that you can fit 2 fans. One of…
This is a drop in replacement that allows an NZXT Kraken watercooler to be converted to a standard BSP G1/4 water cooling loop. Just swap the O-rings and screws from the original 3/8in barbfittings. Not sure how this needs to be printed,…
NZXT PCI Slot Cover should work with others models too.
Haken um Kabel am Tower zu befestigen. Die Haken passen in das Lochgitter vom NZXT H710 Case.
An updated version of my previous design. Easier printing , better finish of the front side, less support needed and stronger too. The previous version had some issues with deformation over time. I have this version for 2 years and with…
Fan Cover for 140mm NZXT H510 computer case. It has no functionality, I made this because I didn't like the original design from case. Use the original screws from the manufacturer.
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
This is a wall mount for NZXT H510 Elite, but I think it will fit other NZXT cases to. Mount is 215 mm wide. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.24 Infill: 40+ Filament: 3de PLA Max…
just a remix. print with the pegs facing up.
A two-part headphones/headset holder designed around the NZXT H510 PC case, although this part will work with similar cases that have 25 mm tall feet. Only requires one 20 mm countersunk magnet, unlike my other design. The holder tucks…
a support for my vertically mounted Gigabyte RTX 3080 OC, which is mounted using a cooler master V2 universal vertical GPU bracket, the holes slot into the base of the case like lego. Category: Other
This is a mini-computer model that harnesses all of the basic ideas of building a Pc. This can be used for teaching purposes or simply for enjoyment. This model helps you enjoy creating a pc without any of the little details or the cable…
Power Light Diffuser to cut the glare on NZXT 510 PC Case and may fit others, I got tired of the glare and flickering of the power button led as it blinks with drive activity. Orientation should be automatic with 4 top/bottom and 2 walls,…
This custom remix was created with the goal of improving cooling performance for my PC without needing to overhaul my case or break the bank . My cooling setup was already decent, but I wanted something more efficient. After searching for…
Made a mount for Waveshare 5' display . It can be mounted instead of the SSD holder on the side of the PSU shroud. The cables for the display should be routed under the cable bar.
i print it for my gtx 1060 i have i nzxt case and it fits nicely with loop for zip ties Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: yes 10% optional Filament: 3d jake…
A foot bracket for NZXT's GPU Riser to make the GPU level w/o touching the Lian Li O11 Vision Compact case's bottom mesh. The foot that the vertical riser comes with would push right down into the mesh tray at the bottom of the case. This…
This replacement side panel is designed for the NZXT H510 PC case and makes it easy to mount standard 120 mm fans directly to the panel. The mounting holes are spaced to match the standard 120 mm fan pattern for a proper fit. Two versions…
I bought an NZXT S340 with a missing foot so measured the length, width, and height of one of the remaining feet and made this model. It doesn't look like the original but functions similarly. I printed it in basic black PLA but if you…
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
The Smart Device V2 comes preinstalled with the NZXT H510i and some other cases as well. The new NZXT RGB & Fan Controller doesn't have the same dimensions. It comes with magnets and Velcro to mount it in the case, however I didn't like…
I wanted a bracket so I could mount fans in the back of my NZXT H1 case without them being visible while still being able to use the exiting back panel. Since I couldn't find anything quite what I wanted I designed my own. This should…
A low-profile hook that press-fits into an NZXT Puck (magnetic cable management device) for hanging IEMs or other smaller items. Printed in ~25 min with 12% infill. You could boost your holding force with a magnet in the base, but it…
This headphone hook sits on the front panel. It doesn't conflict with the front panel filter. Print as is. No need for supports. Perimeter: 2 Layer Height: 0.2mm
Front grill for NZXT H1 V1. I'm not sure about V2. Set top 0, bottom 0 layer and chose the infill patten you like for the grill. You can print them all at once or print separately like mine and stick them together using superglue. Double…
Cover for the grafics card calbe hole of a NZXT S340. With and without the p. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 10% Category: Computer
Inspired by some of the LCD mods on Reddit/SFFPC for the NZXT, I gave this LCD mod a crack and it worked out pretty well. You need the 3 prints.. one's the back plate, and two brackets to hold the screen in place. The screen i used was…
Simple really, this is a straight replacement model for the existing PSU Cover. Mod to your delight. Fusion 360 model included. Drop me a comment or a rating if you like this!
NZXT Kraken X60 AM4-Adapter To use the old watercooling AIO, I had to design a bracket to mount it to an AM4-socket. The original backplate and screws are reused. Use a 7mm drill to widen up the holes until you get a snug fit. printed in…
Remix of a NZXT 510 Case for Raspberry Pi 3 Model B. Changes only to the outside part. I printed mine in PETG but PLA is probably fine too. Use brim. Optional rubber feet, print in TPU. Currently working on a fully own NZXT 510 case for…
"CatGuard" - Because Your PC Deserves Peace! Tired of your cat accidentally shutting down your PC? Is your fluffy friend turning your gaming rig into their cozy winter throne, only to wreak havoc by pressing that oh-so-conveniently-placed…
Replacement ear pads for NZXT Relay headset. Frame is the STL, shown with half-covered replacement pad. Replacement cushion for example at Aliexpress https://de.aliexpress.com/item/4000577555269.html Diameter 85mm is required.
Over time the original injection molded plastic clip just got brittle and fell apart. After a quick search I saw there was no replacement readily available to print, so I made one. Printed in PETG on a 45° angle for additional strength.…
Inspired by this GPU support but the designs are so different I didn't end up calling this a remix. This is a GPU support bracket for an NZXT H700i or NZXT H700 case. It fits my GTX 1080ti Founders Edition, which means it should also fit…
This piece replaces the original cable shroud cover in the NZXT H7 Flow (2024) for better clearance. All screw and hardware mounts are the exact dimensions of the original. Print in 2 pieces A+B are needed, also comes with an extended…
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
NZXT Signal HD 60 Mount. I used 2 Large command strips to mount it under my desk. No supports needed. I used PLA, but i'm sure just about any material is fine.
SSD Bracket to add more hard drives to a NZXT M59 Case. You will need to print x2 Brackets and 4 screws per SSD/HDD. The locking tabs don't quite lock in 100% but it fits perfectly and snugly fits a typical SSD/HDD in the bracket. Print…
A sleek version of Daymo's NZXT Kraken Cable Comb (3580218). Slimmed it and added chamfers, designed with 0 tolerance sand/file/scale tongue to fit. at some point I'll return and mark it as an actual remix once thingiverse works again.…
A GPU anti-sag supporting stand for the NZXT H9 Flow case. Designed for the Asus ROG Strix RTX 4080 specifically, bit will probably work for any GPU with height of ~70mm and a width of ~150mm. Dimensions of the drawing are in millimeters.…
The arrows are for orientation, it goes on the inside of the case. Iron for a nicer look.
An IKEA SKADIS compatible board for the NZXT S340 PC case. 3 parts to print, unless you can do the full model on a really big printer.
This is a replacement for the plastic washer that NZXT never gives you enough. I printed with 100% infill for strength since it does get a lot of pressure.
The rubber USB port cover (flap) on the top of my NZXT Phantom 820 was starting to disintegrate and I've always found it boring/ugly. This is a replacement that sits slightly recessed into the case. The clear TPU looks pretty nice and…
NZXT Kraken X61 AM4 bracket. 3D printed and working well for me.
I wanted to add more drives to my NAS but keep using my old cast-off H440 case. Since the drives mounts are spread far enough apart in the original design it's actually possible to fit two 3.5" drives in 4 of the 5 original mounting…
Remix of Supahobnobba's O11D XL fan duct to fit the NZXT H9 Flow 2023 side fans, simply changed Z height and enlarged screw holes for easier mounting
I bought an NZXT S340 with a missing foot so measured the length, width, and height of one of the remaining feet and made this model. It doesn't look like the original but functions similarly. I printed it in basic black PLA but if you…
NZXT S340 Case Cable Passthrough for GPU wire from case basement Category: Electronics
I designed this bracket to be able to install a 3.5" HDD drive in addition to one 2.5" SSD into my NZXT H1 v1 PC case. Just remove the original 2x SSD bracket and use my bracket instead. You will need some 90° angeled SATA connectors to…
Hey guys, this is my very first thing I created on my own. I hate it when my graphics card bend to the bottom because its too heavy. So I created this graphics card holder to hold it right in the way. This holder ist designed for the NZXT…
Comes in 4 pieces, split STL to objects in prusa slicer. There's a 0.5mm gap between parts; mask back panel, snap pieces into back panel, and fill gaps w/ JB-Weld or similar. This is to allow everything to fit on the bed and account for…
There are two versions. With and without LED lighting. For all common keyboard switches
This adaptor plate allows you to mount an EK-Quantum Kinetic TBE 200 D5 (or similar) PC Water Cooling pump to the removable bar of NZXT's cases that have the vertical cable management bar. As seen in the picture, this allows the pump/res…
The magnets used are 6mm X 1mm Printed face down and superglue together I have added the f3d,step and 3mf files Hope it helps
Similar to my EKWB pump / res combo holder: https://www.printables.com/model/291904-ek-pump-holder-for-nzxt-cases This mounts the Alphacool Eisstation to the vertical bar inside NZXT's PC cases.
Foot for NZXT H-series case. Has recess for existing rubber mat. Modelled in Fusion360. Prints without supports.
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
For my custom loop NZXT H1 V2 I designed some parts: Backpanel for 240mm Radiator + Fans Pump Bracket for EK Classic 160 Foot with Base and Diffusor
Made this to use with my NZXT computer case since the magnets that I was able to find weren't strong enough to hold the headphones. Created in Autodesk Inventor, added .step file if you would like to modify it.
Disclaimer - I am completely new to 3D printing and designing. After printing this out, I noticed a few mistakes I made in the 3D model. There is a curve and an extra line on this design. Just be aware of this before printing . At some…
I needed a second tray for my NZXT 710 case but it'll probably work with other NZXT cases. I this should snap in without the need for the screw but it does have a hole for it. I would recommend screwing it down if you're using an HDD but…
I made a hook that holds my headphones that clips on the front face plate of the NZXT H440 Print instructions Category: Audio Summary I made a hook that holds my headphones that clips on the front face plate of the NZXT H440
My friend needed extra HDD/SSD trays, as his (bought used) NZXT H440 computer case only came with one. So, I measured the original and made this to fit the tray slots in the case. Fits both 2.5" and 3.5" disks. It's available in three…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
