NZXT H700 GPU Support Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by this GPU support https://www.thingiverse.com/thing:3283357 but the designs are so different I didn't end…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 61
- Makes
- 0
- Views
- 1,856
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Inspired by this GPU support but the designs are so different I didn't end up calling this a remix.
This is a GPU support bracket for an NZXT H700i or NZXT H700 case. It fits my GTX 1080ti Founders Edition, which means it should also fit a GTX 1080 FE. I haven't tested it with any other cards.
I have an NZXT Kraken G12 GPU cooler on my card, so it doesn't have any of the stock cooling underneath the PCB.
The NZXT logo will need a bit of post-printing cleanup since I included a few 0.5mm supports. Just cut them out with a small knife. Print it without any additional supports.
Hardware:
| Item | Quantity |
| M3 x 10mm socket head bolt | 2 |
| M3 nut | 2 |
I would suggest you print this in PETG since the inside of your case may get a little toasty sometimes.
Print instructions
Unassociated tags: GTX 1080, GTX 1080ti, NZXT H700
Category: 3D Printing Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 20
Filament: AmazonBasics PETG PETG Black