NZXT H1 v2 Rear Panel Fan Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer and mounting for 2x120 or 2x140mm fans on NZXT H1 v2
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 622
- Makes
- 0
- Views
- 5,539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Comes in 4 pieces, split STL to objects in prusa slicer. There's a 0.5mm gap between parts; mask back panel, snap pieces into back panel, and fill gaps w/ JB-Weld or similar. This is to allow everything to fit on the bed and account for tolerance issues.
Printed with Protopasta CF-HTPLA w/ a 0.4mm nozzle, 10% gyroid infill, 4 perimeters, no supports
For retaining pins on case, requires M3 brass inserts and M3x10 button head screws. Insert these into the 5mm holes that don't have cross scores on them w/ a soldering iron, then put screws through thingiverse item below into the brass inserts.