NZXT H510 Flow PCIe Slot Cover With Patterned Variations
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The sliding PCIe cover on the back of an NZXT H510 flow pc case, with solid and patterned variations.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 95
- Makes
- 0
- Views
- 755
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead.
The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers that let air through. I printed these covers with no top or bottom layers to get the pattern effect from the infill. You can open the .3mf file in your slicer and print out your preferred cover or edit it to use other infill patterns.
I printed my cover in regular PLA, it never gets hot enough for it to become soft.