NZXT S340 Elite Front Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed S340 Elite front panel with a symmetrical design and reinforced structure
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This custom remix was created with the goal of improving cooling performance for my PC without needing to overhaul my case or break the bank. My cooling setup was already decent, but I wanted something more efficient. After searching for solutions, I came across Zawa44's original 3D model and decided to make a few adjustments.
Print Settings & Notes:
- Dimensions (L x W x H): 200 x 445 x 32 mm
- Printer Used: Prusa MK3S
- Print Time: 10h+ (unsure, been a long time since I've printed it)
- Infill pattern: gyroid/hexagonal
- Infill: 40–50% (could be lower, but I preferred it solid)
- Material: Black PLA+ from Sunlu
No supports required!
IMPORTANT!
Models are upscaled — be sure to scale to 0.1x before slicing to correct the size. This is due to Autodesk Fusion’s unitless format, which causes the conversion to .stl files to appear larger than intended.