1 / 16
NZXT H1 v1 - 2.5" SSD + 3.5" HDD bracket mount drive tray — zdjęcie 1
1 / 16

NZXT H1 v1 - 2.5" SSD + 3.5" HDD bracket mount drive tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

simple bracket mount to install a 3.5" HDD and a 2.5" SSD into the NZXT H1 v1

Ocena
0 / 5
Polubienia
10
Pobrania
147
Wydruki
0
Wyświetlenia
2572
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I designed this bracket to be able to install a 3.5" HDD drive in addition to one 2.5" SSD into my NZXT H1 v1 PC case. Just remove the original 2x SSD bracket and use my bracket instead. You will need some 90° angeled SATA connectors to connect the drives. Be aware that these are available angeled in different directions, see pictures. If you have a hight TDP components installed in your case, be sure to check the temperatures of your drives to guarantee safe operation and prevent data loss.

The photos show an early version of the bracket wich I printed for myself and optimised slightly for an easier installation.

Instructions:

  1. Install nuts on inner side of bracket
  2. Install drives
  3. Install bracket into case and screw it in place
  4. Connect drives to SATA (90° angled connectors) and PSU
  5. Enjoy

Tagi