Liczymy pasujące modele…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Asus ROG - AORUS Gigabyte Keychain - Alienware Dell - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you…
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
This file is the rear I/O panel model file for the GIGABYTE H410M HD3P model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
This file is the rear I/O panel model file for the GIGABYTE H310M HD3 model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
I made a vertical stand for my BRIX PC. I use a GB-BER3-5400, but some other models should fit too. It should print fine with supports enabled. The fit on my machine is great, just slightly snug. The part does not fall off the PC when…
Requirements: 4x M4 threaded inserts 1x Included VESA mounting plate and bolts I printed mine in Bambulab PLA-CF and it works very well. The power brick will be sticking out of the back, as it is otherwise too long to fit without the…
I built a computer for my father a few years back that was missing an IO-Shield. I figured I might share. Also includes a Rick Silhouette with “Peace Among Worlds” :D Fits this Motherboard: Gigabyte-B250M-DS3H…
A motherboard shroud for the (arguably) ugly gigabyte b550 ud ac atx am4. It does require you to remove your gpu and cpu cooler cables But other than that it is quite simple! I am hoping that this model will help shine some light on what…
a low profile 4 video output bracket for the gigabyte 1650, there are no 4 output designs only 3 outputs, so I made on Print as densely as possible if possible with PETG or ABS because the low profiles are hotter, check that the screw…
Dust/Beauty cover for the bottom row header pins/plugs on the Gigabyte X870E AORUS Elite motherboard
Inspired by optimumtech's recent YouTube video, I decided to also try a 4060 LP build. However, my printer isn't tuned in right, so I needed something that is a bit less fragile and very easy to print. I also didn't want to use a riser,…
bracket to hide laptop so it can hang from the back of the support with string.
Layer height: 0.2mm Bill of materials 3 Noctua NF-A9 PWM chromax.black.swap Arctic 4-Pin PWM Fan Splitter Cable (to daizy cain the fans) 4-Pin PWM adapter to small 4-Pin (to connect the fans to the GPU mainboard) 4 additional black fan…
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
used regular .2mm print profile print with supports backplate is optional
An IO Shield replacement for the Gigabyte B250M-DS3H based of Paul Bibb's model
Again a classic second hand case, the motherboard arrived but not the io shield. I made a simple drawing on Tinkercad and tested it, it's not perfect but it will work. Use it as you want completely free :)
VESA adapter for LG Quickrelease to a Gigabyte Monitor. I used this for mounting my 32" OLED from Gigabyte to a LG ERGO stand. Disclaimer: This 3D model is provided "as is" without any warranties. The creator shall not be held responsible…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
IO Shield - Supermicro SC510-203B - Gigabyte MC12-LE0
Update: Higher position and further away from screen for less bleed on screen. Since the back base of the monitor is thick the original mount won't hold on it without this adapter. It is a snug fit on the monitor, so the adapter plate…
Introduction A duct to divert GPU exhaust directly out of your case. This will possibly raise your GPU temperatures by up to 2ºC in a well cooled case, but will lower your case temperatures. In a poorly ventilated case, it may lower your…
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
My backplate for Gigabyte motherboard B450M DS3H (rev. 1.x). Number of walls 3, layer height 0.2 mm, infill 15%, 0.4mm nozzle, no supports.
I bought a B560M DS3H V3 off eBay without an IO shield so I made my own. Printed on Flashforge 5M from PLA+
Compatible ioplate for motherboard Huananzhi x79 Deluxe
I bought a new monitor Gigabyte MO27Q28G and it doesn't have a headphone stand, so I decided to draw and print one. It works great, so maybe someone else will use it. The stand is designed for the MO27Q28G monitor but it will probably…
Background I would like to use the WiFi card with a small form factor tower but unfortunately it does not come with a low profile bracket and as such it doesn't fit in the PC, so I remixed haavardoks low profile bracket model to fit this…
BOM M3 x L6 Screws (4 pcs) M3 x L8 Screw (1 pc) M3 x L4 x OD5 Heat-set Insert nut (1 pc)
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Asus ROG - AORUS Gigabyte Keychain - Alienware Dell - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you…
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
Two variants of clips for Tobii 5 clips for bezel mounting on Gigabyte G32QC monitor
You will need: 4 × Noctua NF-A4x10 12V PWM fans (for both ASUS and Gigabyte versions) 1 × M2 self-tapping screw (only for the Gigabyte version ) You need to modify the fan cables — please check the pictures I uploaded. I made a custom…
I didn't like the bare metal and screw holes at the end side of my Gigabyte RTX 4070 OC so i designed this thing that covers that and pushes more air from the front fans to the underside of the GPU, it uses the M3 screw holes on the gpu…
This file is the rear I/O panel model file for the GIGABYTE H410M HD3P model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
This file is the rear I/O panel model file for the GIGABYTE H310M HD3 model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
Compact homelab/server rack designed for Gigabyte BRIX mini PCs and similar Intel NUC-sized systems. This design supports up to 4 × Gigabyte BRIX i5-8250U units in a compact vertical footprint while keeping the setup tidy, accessible and…
backplate for GIGABYTE RTX 3050 LP only! for covering gpu from dust not to make any improvement or performance print downward (text on heat bed) apply support for screw holes only better print using PETG or ABS
Firstly, a disclaimer: This is my first serious project made in CAD software, I am a novice at this so the model might not be 100% perfect. I will be refining the design later on so any feedback is appreciated. Do this mod at your own…
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
Gigabyte themed contoured fridge magnet. A clean and simple design with a 3D extruded logo. Print in a single colour for a simple solid coloured magnet or print in 2 colours for a contrasting 3D effect. For those of us who do not have a…
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
Support piece I made for my Gigabyte Vision 3070 to stop it from sagging. It may work for other GPUs. Default Height between GPU and PSU Shroud is 80.6mm. Default card width is 101mm. Fusion 360 file attached.
replacement io shield for A520M DS3H Category: Replacement Parts
A sliding hard drive rail for 3.5" drives. This is an extended length version designed for primarily for shucked disks which only have 2 instead of the typical 3 screw holes on either side. The rails which are included with the cases I…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
moddied gpu bracket, to fit gpu and psu
❣I had come into a Gigabyte G1 Sniper Z87 Motherboard, unfortunately it was without the I/O shield. I modeled this one up as a replacement to use the board in a build. Unfortunately, I didn't take any pictures of it installed while I had…
I designed a small wallart of Gigabytes Aorus logo. It has a raceway for a RGB LED Strip (see pic 2) and four mounting holes for screws. Its dimensions are 290x295mm so it can easily be printed with a 300x300 mm 3D printer. I highly…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
I designed these brackets to mount a Gigabyte Aero Geforce RTX 4090 in a Hyte Y60 case. The standard vertical mounting position for this case will leave the RTX 4090's fans pressed very close to the glass, which restricts airflow. This…
I designed this extension to turn a gigabyte brix mini pc into a pfsense router. I will add more details at a later date. Just posting it to share with someone.
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
I modeled this shield after the motherboard dimensions. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. The photo was taken before…
Made an IO shield for a Barracuda Web Filter 310 (BYF310a) and a Gigabyte H110M-H motherboard. It might fit other Barracuda devices and can be a good starting point for customizing it to other motherboards as well. Instead of designing…
Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…
Couldn't mount the monitor to my monitor arm and didn't have any spacers that I trusted so I made something better. WARNING: I'm not responsible for any poor mounting or damage.
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
I lost my Gigabyte ECO600 wireless mouse battery cover a while ago. Finally made a replacement. It took 3 tries to finally get it to fit nicely. Settings: Supports: no raft: no Print Settings Printer Brand: FlashForge Printer: Guider II…
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
If you have a similar monitor stand, that is a nice way to add extra space to store pens and others. Made with PLA at 0.2 layer height.
GIGABYTE RTX 4070 Fan Filter Made this since I currently have an open bench setup. Requires 3x M3*6 screws Printed in PETG to test but may require a different filament for long term. You will need a 256x256mm bed or larger to fit this…
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
This is a logo plate I made for someone as a custom led logo. With permission to publish this. Print settings: bottom part is 3mm, should be printed with clear filament, I used Extruder PETG. Top is 1mm black PETG. Use M600 to change the…
Made this covers per request and got permission to publish. 3 versions with bit different logo designs. I printed them with clear Extrudr PETG on the bottom and black PETG on top. On the bottom parts I used a variation of the…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
I made a vertical stand for my BRIX PC. I use a GB-BER3-5400, but some other models should fit too. It should print fine with supports enabled. The fit on my machine is great, just slightly snug. The part does not fall off the PC when…
