1 / 3
Gigabyte Z690 UD DDR4 Motherboard armor — zdjęcie 1
1 / 3

Gigabyte Z690 UD DDR4 Motherboard armor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Motherboard armor for gigabyte z690 ud ddr4

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

I want to mention upfront that this is one of the first models of this scale and complexity that I’ve made. As a result, it isn’t very well optimized, and there are likely quite a few design flaws in the CAD files.

I’ve attached two CAD files:

  1. One with the completed model.

  2. One with a blank body without cutouts, patterns, or other details, so you can create your own design.

Feel free to modify the model however you like and create your own designs.

I designed the motherboard cover based on similar solutions found on more expensive motherboards, such as those from NZXT. I tried to make sure that all important mounting points, connectors, and BIOS reset jumpers remain accessible.

The M.2 connector cover is secured by a small latch and two 6 × 2 mm magnets. I installed the magnets by melting them into their slots using a soldering iron.

I also added ventilation slots for cooling the SSDs and chipset. During testing on an open test bench, the chipset reached a maximum temperature of 65°C with an ambient temperature of 26°C.

The model is mounted using the existing standoffs for 2280 and 22110 SSDs and secured with M3 screws at the mounting points intended for 2260 SSDs.

Please note that NVMe drives with large heatsinks will most likely not fit under the NVMe slot cover.

Tagi