Liczymy pasujące modele…
I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…
Modified version with snap-in friction fit. No screws or threading required. The fit is a little bit tight to make sure that the feet doesn´t come lose by accident. Update: The locking tabs were a bit too tight for modern motherboards…
This is a motherboard tray to fit a standard ATX motherboard. The optional card support bracket screws into the side with two to eight M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four…
This is an improved remix of Henlor model available here . Needed: 3 x M3x18 screws to fix support to motherboard 2 x M3x8 (or M3x10 or M3x12) screws fo fix fan on support 2 x M3x10 washers to keep fan on support
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
PC test bench / open frame PC case Changelog 2023-06-28: Fixed the position of the PCIe slot screws. New file name: “ITX base -_bottom v2.stl” 2023-12-04: Fixed height of PCIe bracket (thanks @sonicscrewfu for the feedback) 2025-01-06:…
The 6x version contains six pieces with modifiers for 100% infill in the shaft part to be tapped and grouped together for printing. The 1x contains a single unaltered foot. I tapped mine with ISO M3 thread but 6/32 UNC or even threading a…
Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…
This motherboard mount is fully ATX, Micro ATX and Mini ATC compliant with built-in standoffs. I have also included multiple M4 holes positioned for the HSW M4 connector. I have cut the tray into 3 parts, suitable for print beds of 235mm.…
This is a motherboard tray to fit a microATX motherboard. The optional card support bracket screws into the side with two to five M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four M3x6 or…
Model is 305mm x 244mm x 1mm and is based off the official ATX, Flex ATX, Micro ATX and ATX standards. The solid version uses roughly 100g, the skeletonized version uses roughly 50g Standoffs have no threads, feel free to remix to include…
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
This is my first Model for the 3D Printing community as it's been take take take for me, for years !!! So this is my attempt to give something back. You're Welcome !!! OBJECTIVE The intent was to silence the power supply Fan and cool the…
QIDI Q1 Pro electronics air flow can be improved, this mod was created to add 80mm 5V, you can use 24V using parallel power splitter using the stock fan, fan holder. If you use 5v, much quieter and enough air flow, you can connect the 5V…
I split the project into two printable parts so that it could be printed on the MK3S+
This is only compatible with the K1 (not the Max). The main goal of this mount is to have some protection over the motherboard if you're using your printer without the bottom panel. And if you install this mod you will no longer be able…
This is a derivation of MrTeliP original Ender 3 Pro SKR Mini E3 Case. He was gracious enough to make the STEP file available which made the editing rather easy. I removed the openings from the cover, as I didn't want filament to fall…
I designed this today because I needed a stand to fit more cpu rigs on one shelf but they just wouldnt fit and I really didnt feel like paying $15 for this to some guy so I just designed it myself. If you want to print and sell these…
Simple Motherboard standoff. Thanks for looking! Print Settings Rafts: No Resolution: 0.3 Category: Electronics
With it being currently almost impossible to buy a Raspberry Pi, I was faced with a problem of finding a machine on which to host an Octoprint server for my brand-new Prusa Mini+. Since almost any old laptop can run it, I took the one my…
This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by TerraVestra Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This cover houses 80x25mm fan. An lm2596 mount with screw added, please make sure your lm2596 fits in this…
Just a simple ATX motherboard standoff. It raises motherboard about 2.3cm. Print it with the infill at 25%, and at the top section make it 100%. If you have any suggestions please write them in the comments
In my hopes to reduce the overall noise level of my Ender 3 V2, I decided to make this new version of the motherboard cover. By eliminating the fan cover, the pitch and overall dB are reduced significantly. Read more about it here . I…
This adapter is tested with a motherboard from an Optiplex 3050 SFF, but it should be compatible with any SFF Optiplex motherboard from 2015 or newer. A reference image of a compatible motherboard is included. Printing Printed with 20%…
Off-lease business computers are one of the best ways to get decent (if slightly older) hardware for cheap. I grabbed a optiplex 7040 with a i5 6500, 16gb RAM and a 512GB SSD for less than $150. The down side is that the OEM PSU isn't…
These files are for anyone that wants to create custom parts based on the PSU shroud and motherboard tray in the Frame 4000D. PSU shroud This shroud have 62mm clearance from the front fan mounts (meaning you can put any radiator/fan…
I designed this case to be a standalone setup. it has spots for 2, 80x80mm, pc fans such as the Noctua nf-a8. I incorporated several tie down spots for cable management and 20mm holes to rout the cables in and out. I have proved the…
This is a simple motherboard holder for Mini-ITX only. It is designed to be mounted on a wall or board. The motherboard is attached with standard computer case screws which will cut their own thread in the printed towers, and I used small…
Description This is a printable* testbench for those who need a platform to easily access, swap, and diagnose hardware on their PC. Instead of a case this motherboard stand lets you easily swap CPU, GPU, or RAM. The testbench features a…
NAS enclosures are expensive. Really expensive for what they are. I decided to make one that is modular starting with the motherboard module. It fits a Mini ITX Motherboard and a single slot PCIe card so you can expand your SATA ports.…
Perfect for displaying or storing your motherboard. Print 2 legs and one crossbar. It is a reasonably easy print, so the settings are up to you. I printed with the following: PLA 0.6 nozzle 0.3 layer height Arachne 2 walls 3 top and…
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
This model can fit an ITX Motherboard and 2 80mm fans in a 2U form factor. Model includes some holes for zipties to manage cables. I've included an optional backplate that can be modified to suit any cutouts you may want. Bill of…
For sturdy, repeatable mounting.
on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants
1:1 of the ASUS ROG STRIX B360-I GAMING mini-ITX Motherboard.
The main body has areas that can be glued and the the pi becomes somewhat structural once installed without the covers. The electronics cover has new little tabs for m3x12 or longer screws to hold it together.
3D Printed Motherboard Stand: Introducing My latest addition a meticulously designed motherboard (MB) stand, perfect for CPU miners Or open PC frame. This stand isn't just a functional piece; it's a testament to thoughtful design and…
I found the pi 400 keyboard pretty unusable and wanted to use the processing of the pi 400 for another project. Print in some non conductive filament, personally I printed it in some overture PLA pro, But any PLA should work. I'm not sure…
Computer (PC) motherboard standoff. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: gembird PLA+ gray Category: Computer
I created this case for the Creality E3 Free-runs Motherboard (I believe that most Creality motherboards such as the 4.2.2, 4.2.7 so they should fit inside this case as well) because I wanted to use the motherboard to drive some stepper…
micro ATX board standoff. made it so i can have my mother board a little bit off the table so it can sit flat on the table top. the motherboard model is asrock h61m-vs. the screws for it are original motherboar screws and they just screw…
Я сделал этот апгрейд системы охлаждения материнской платы по одной причине - уменьшить шум в режиме простоя принтера. Меня не устраивали уже готовые решения, поскольку они рассчитаны на большие 120мм вентиляторы. Габариты очень большие.…
This is a replacement I/O Shield for an Asrock B550M Pro 4 Motherboard. It should snap into place on it's own. If you wish to add metal shielding, the I/O Shield is 2" tall - the same height as 2" aluminum foil tape used for ducting. It…
Had an old 17" HP dv7 (my first PC) in working condition but with a broken keyboard and dead battery, and three 2.5" HDD from family members' laptops I upgraded to SSDs. Since the parts had been sitting in a drawer for years, I decided to…
Optional fan assisted cooling duct if you have a PrusaBox enclosure, STEP file included plus optional finger guard
Introducing our ATX Motherboard Wall Mount, a practical solution for displaying your old ATX motherboards with ease. This 3D printed design offers simplicity and functionality, allowing you to showcase your vintage tech in a stylish…
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
FLSUN V400 motherboard mount for easy access to microSD port
ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components. I made these standoffs while designing a 10 inch rack…
Replaces the original motherboard 40mm (40x40x20) fan with a 5015 blower fan. 3-pin 5015 fan - https://www.aliexpress.us/item/2255800624695785.html or use a 2-pin
AM4 Backplate for Ryzen CPU AMD Motherboards use ABS or other High Temp Material do not print in PLA. You also need some screws depending on your cooler, also use a light one.
Tired of the stock motherboard fan on your Flashforge? grab a 24v 4010, print this in at least PETG, and screw the fan into the bracket with 4 M3x12 socket cap screws and 4 nuts. Mounts to the chassis with the stock fan screws. My printer…
This is the ultimate motherboard cover for your SV06 or SV06 Plus. It allows you to install an external 92mm fan (I used the Arctic F9 with great results) to run the motherboard absolutely silently. Designed to be used with this PSU mod:…
Mni-ITX Motherboard Stand HoneyComb Design - Supporto scheda madre Mini-ITX a nido d'ape Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
Reduced the number of fan mounting points and lowered the fan position to better make us of the back panel opening. For a 60x25mm (6025) fan, I used the Notura NF-A6x25 PWN 4 wire (don't use the Low Noise Adaptor as the fan sometimes does…
Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…
I used it as a start to design this: https://www.thingiverse.com/thing:5368104
My motherboard fan sounded like a motocross bike so time to replace. This holder hangs on to the poop chute with double sided tape. No need to remove heatsink, or even remove the old fan if you don't want to. Use the connectors that come…
07.07 Orange PI Zero3 was released and i buy one) I made this on the base of https://www.thingiverse.com/thing:4904919 and with just photos but it looks very close. I hope that this model will help to design cases to this new SBC
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
Optimised for 0.4mm nozzle. The internal structure must be in ABS with at least 20% infill and the outer part in PLA. You must need to split the outer part because of the height so theres is a ring to connect the parts. The io shield, in…
remix to add sd card holder Category: 3D Printer Parts
Redesign model of TryK A little bigger cutouts for fans and removed “pegs” for everyone with motherboards with headers placed too high to fit both brackets.
This needs a little bit more work. But is mostly functional for now. I had a bit of trouble fitting it square to the case. I broke the screw hole tab. I would love to make this printable without supports, fit a wide range of cases, use…
I want an easy way to prevent the motherboard from touching the work surface while I'm testing/troubleshooting. Drive an M3 screw through the center hole to use it to locate the motherboard in position. It is possible to put the rest of…
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Stand for ATX motherboard to assemble with 4 M3 screws and nuts. The model has been cut to be printable on MK2 and MK3. Then the stand can be fixed with wood screws to a board. Be careful, the screws must not touch the motherboard. 4x…
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower? Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit? Are you an electronics hoarder itching to…
Mini-ITX Motherboard Stand - Supporto scheda madre Mini-ITX Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file,…
Modified to fit Bambu Lab printer's small bed. Probably not suitable for all ATX boards because of that.
Summary As you know the Qidi Plus4 printer has a very small and weak fan to blow the motherboard and motor drivers. This model directs the airflow to the heatsinks of the drivers and CPU, it can reduce the temperature of the drivers to a…
EDIT 4/14/2023: Added 40mm and 60mm fan covers upon request. EDIT 3/16/2022: Added printer.cfg for klipper with skr mini e3v3 for the Kobra Go. Change the MCU ID Change x/y probe offsets, mine are for the frankenstein duct remix…
Based on the the updated version, I used Tinkercad to disassemble and customize the case into individually printable parts. It is held together with hot melt inserts and M3x6mm screws. For the support strut 2x M3x8mm are needed. The fans…
test bench/motherboard tray to put in heat-set inserts then motherboard standoffs to mount itx/matx/atx motherboard on. Bottom ⅓ fits in the top ⅔ and arrows point at each other so you know the correct orientation Size: top: 237mm x 185mm…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
The reason for multiple pieces is because my printer is a Prusa Mini.
IO Shield for ASUS PRIME Z270-P motherboard. This model was reconstructed digitally from an image and as such may not be perfect. Imperfections are mostly unnoticeable at scale. For Z270-A boards try Brusli009 's…
IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.
A simple mount for Ender 3 and 5 sized motherboards onto single or dual 2020 (2040, 4040) extrusions. Compatible with boards including but not limited to: Creality V4.2.X, Mellow Fly E3, BTT SKR Mini E3 VX.0. It is strongly recommended to…
print with brim so it not fall
Adapter for replacing the noisy 40 mm motherboard fan with a quieter and more efficient 80mm one. Significantly reduces printer noise (especially during idle). Filament: PETG or more heat-resistant (ASA, ABS...) Printing Parameters: Layer…
This adapter plate mounts onto the factory standoffs using countersunk m3 screws (about 6mm in length). Then the Manta board can be mounted on the adapter plate standoffs using M3x4mm screws. Since the location of the USB and SD card…
3D Printable Mounts to adapt Framework motherboard to Micro-ATX Motherboards and Cases Feel free to remix/mod to your needs. Uses standard sizing and mounting points. Any board smaller than Micro-ATX is too small for Framework Motherboard…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
3D Printable Mounts to adapt Framework motherboard to ATX Motherboards and Cases Feel free to remix/mod to your needs. Uses standard sizing and mounting points. Any board smaller than Micro-ATX is too small for Framework Motherboard to fit.
This 3D model is a practical accessory for the Ender 3 series 3D printers. It transforms the motherboard housing into a drawer-like structure for easy access. The design places the other side on top, allowing the motherboard to be…
To replace the original fan of the Bambu X1 motherboard without disassembling the original one. This is a bracket for a 4410 fan (in my case I used a noctua NF-A4x10 5V PWM) to install on the Bambu X1 3d printer without disassembling the…
Mount is for the BigTreeTech Manta M5P. Refer to Ender 3 NG documentation or discord for further information. Use 2 of Ender 3 NG Beta ENG-DIN1_b.stl
This is a remix of Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support) by scaryPug , which was a remix of Ender 3 V2 & Pro Silent Motherboard by TerraVestra . Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This…
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
This model has been test fit to make sure it does not interfere with the Z axis notch. Prints flat(diagonal) and in less than 1.5 hours. - The fan mount is designed to fit the 6010 fans(I used Winsinn from Amazon ). You will need two…
Another remix of this fantastic motherboard cover. Remixed to fit 60x25mm fan and modified/enlarged air vents and walls as well. Included is modified leg to make everything fit. ( https://www.thingiverse.com/thing:4603075 ) Print Settings…
A bracket for HP EliteDesk 800 G3 SFF motherboard for mounting in Cooler Master NR200 NR200P cases. It's likely you can also use it for mounting inside other mATX and ATX cases but I have not tried it myself. This is a low effort model,…
Size of inserts used: M3 x 4mm (L) x 5mm (W) Can be used with any size MOBO: ITX, MATX, ATX
This is a motherboard cooling fan mount, for 80mm size for improved cooling and silence. Original Post: https://3dprintbeginner.com/cr-10s-pro-upgrade-80mm-motherboard-fan-mount/
Motherboard Standoff easy and quick to print
Quick case to mount an HP 9461NGW laptop without the rest of the laptop. X86 Raspberry Pi alternative (with more power). Start by mounting the SSD in the bottom, then slide the power plug in, and screw in the motherboard, followed by the…
This is a design I made to have a dual motherboard PC enclosure. It has a 3.5" HDD carrier that bolts to the frame. All screws used were M4 screws. Hardware used: Micro-ATX mother board Mini-ITX motherboard Seasonic SS-300TFX PSU (I split…
