Toolless motherboard standoffs with clip-on retaining washers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ATX/mATX/ITX motherboard standoffs with clip-on retaining washers. Raises the motherboard ~9.5mm off the ground.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 1393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components.
I made these standoffs while designing a 10 inch rack mountable ITX chassis. They proved to work really well on their own so I'm uploading the standoffs as a separate model.
The clip-ons fit snugly on motherboards with 1.6mm thickness, which should fit most *TX motherboards. If your motherboard is of a different thickness you can still use the standoffs, but the retaining washer might not latch on properly. Let me know if I should add more models for different thicknesses.
Printed at 0.2mm layer height, 3 walls and 20% infill (or more). PLA works fine.
